Posts

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.

 

1.Firstly,JPT laser source

You  can do research in China market.

The most popular color marking laser source is Mopa JPT brand.

 

2.Secondly,Color series

For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.

M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.

For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.

 

3.And also,Deep engraving series(higher power)

M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.

 

4.And then,Pulse width adjust

There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.

So it is good for color marking.

 

5.And also,we listParameteres for M7

20w and 30w:2-350ns;0.8mj;1-4000khz

60w and 100w and 120w:2-500ns;1.5mj;1-4000khz

80w:2-500ns;2mj;1-4000khz

 

6.And also,M1 and M6 parameters FYI.

M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.

 

7.Last but not least,Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Difference:
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus’ work.
Mopa  > Raycus

 

8.Most of customers from jewelry and firearms guns industry choose 60w M7.

Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.

And then,we list some Color marking videos:

https://youtu.be/seidndP5_nc

https://youtu.be/ii44NOPo5bI

And also,For firearms marking engraving,you can check below article:

 

And also,For jewelry marking engraving cutting,you can check below article:

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Mopa fiber laser marker, stainless steel color laser marking machine-jill

Mopa fiber laser marker, stainless steel color laser marking machine-jill

Mopa fiber laser marker is more and more popular in the laser marker market now.

Today we would like to share more about mopa working information.

 

1.Mopa fiber laser marker

Firstly,we should konw: Fiber laser marker has usual q-switch type and mopa type.

Both can mark on almost all metal.

Mopa can do all the work of Raycus.

 

Mopa mainly has 3 advantage.

1)Firstly,mark color on stainless steel.

2)Secondly,Mark black color on anodized aluminum

3)Thidly,Mark on plastic with a better effect

 

2.Secondly,Mopa laser source

You can do research in China market.
The most popular color marking laser source is Mopa JPT.

 

3.Color series

For color marking series,JPT has M1+ and M6+,20w and 30w.

 

4.Difference between M1+ and M6+ 

The main difference is in adjustable pulse width.
M1+: 6-200ns
M6+: 2-200ns

Single pulse energy is 0.5mj and frequency is 1-2000KHz.

You can see,M6+ has wider range.
So it has wider color range and the color effect can be brighter.
If customer has strict color demand,u can suggest M6+.

5.Watt

Generally speaking,for color marking,
we always suggest 20w M1+ to customer.
But color marking speed is slow.
If you need faster speed ,or want a little deep engraving too,u can choose 30w.

 

6.Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Difference:
Mopa———Pulse width (2-200ns), Pulse frequency (1-2000HZ) , so MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed. 
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus‘ work.
Mopa  > Raycus

 

7.Mopa fiber laser marker working videos FYI.

 

1)Color marking on stainless

https://youtu.be/TJvl87XaYvM

https://youtu.be/9hNX1Mplrzk

https://youtu.be/Dw-77DsA7f8

 

2)Mark black color on anodized aluminum

https://youtu.be/GyeRbqx2B2Y

 

3)Mark on plastic

https://youtu.be/8NyMrVw4TXA

https://youtu.be/JS8xMT27w-c
Hope this can help u learn more about Mopa laser source.

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Fiber laser marking machine,firearms gun deep engraving laser machine-jill

Fiber laser marking machine,firearms gun deep engraving laser machine

Today we would like to share some information for firearms gun deep engraving laser machine.

Fiber laser marker is widely used in gun firearms industry.

 

1.Firstly,for wattage choose

If just surface marking,20w is ok.

Most customers need to do deep engraving work on guns.

So they choose 30w 50w or 60w.

50w is the best seller in firearms industry.

Especially you always do the deep engraving work on steel.

Aluminum and brass is easier to do deep engraving.

 

2.Secondly,Machine model

In order to save shipping cost,most overseas customer choose the min split model.

1)Firstly,mini model

 

 

 

 

2)Secondly,Desktop model

 

 

 

 

 

 

 

3)Thirdly,Enclosed model

 

 

 

 

 

3.Thirdly,Rotary axis

Most customers will choose rotary axis to mark the round object,such as the barrel,etc,.

As per experience,80mm rotary is good enough.

rotary device

 

 

 

 

 

 

 

4.Next,we share some working videos FYI

https://youtu.be/9udz0ZG6egg

https://youtu.be/n_94MpW5y7k

https://youtu.be/VF0mDyQh5W4

https://youtu.be/CraB5KVf9gw

https://youtu.be/xrr7m9jog38

https://youtu.be/YNy8f_OWz3Y

https://youtu.be/df-xAVlRT_I

https://youtu.be/YNy8f_OWz3Y

https://youtu.be/KAoGCvwhlgI

 

5.And also,share some gun samples.

gun fiber laser engaving machine

gun fiber laser engraving machine

 

 

 

 

 

 

 

 

 

Fiber Laser Engraving on Firearms

 

 

 

 

 

 

 

 

6.And also,Some customers also would like to use it for jewelry customs engraving.

Here we would like to share some videos.

https://youtu.be/NOAsz_E59-0

https://youtu.be/I–eJXs35TM

https://youtu.be/WFLZxXKHh6A

https://youtu.be/0gEQnxO5efk

https://youtu.be/V2WM4DrAG_Y

https://youtu.be/Sd31WGfMEOY

 

7.And next,For stainless steel,mopa fiber laser can do the color marking on stainless steel.

20w and 30w Mopa JPT M1 or M6 is good.

Share some color marking videos.

https://youtu.be/seidndP5_nc

https://youtu.be/ii44NOPo5bI

https://youtu.be/0gTeryd4AHE

https://youtu.be/RDAmLthhppU

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Firstly.

Secondly.

Firstly.

Secondly.

Firstly.

Secondly.

The difference between Mopa laser marking machine with Fiber laser marking machine

The difference between Mopa laser marking machine with Fiber laser marking machine

Mopa laser marking machine and Fiber laser marking machine

1.Applications
When we buy a new machine, we want to use it to meet our demands and improve work efficiency.

Fiber laser can mark and engrave on all  metal materials and part of the plastic.While MOPA laser is one of fiber laser.

Firstly,It is able to do the basic work of fiber laser.

Secondly,it also can mark colors on stainless steel(yes, only on SS) and black colors on anodised aluminum.

By the way,it can only mark on the metal surface when it do these two jobs.

That’s why we recommend our clients choose 20w or 30w when they need to mark colors.

2.Laser power
If you want to mark colors on stainless steel, 20w or 30w is ok.The spead of 30w is a litter faster than 20w. It has no 50w.

Fiber laser common power is 20w,30w and 50w.20w is mainly used for surface marking, 30w can do a little engraving(≤0.5mm),and 50w is suitable for deep engraving.

Mopa is mainly used for stainless steel coloring and anodized aluminum blacking.
With the smaller vessel parameters of Mopa laser, the material is not easily deformed.And the shading is more delicate and bright.

Because it can make the laser stay on the material shorter.And it has enough energy to clear the anode layer.

Mopa laser is the best choice for the processing of thin aluminum oxide surface peeling anode.
Mopa lasers have a wide pulse width and pulse frequency adjustment range. Using the parameters of narrow pulse width and high frequency can make a black effect on the surface of the material. Different gray scale effects can also be marked through different parameter combinations.

Because the Mopa laser can flexibly adjust the pulse width and frequency parameters, not only can the line drawn be finer, but also the edges appear smoother.

Any interest,feel free to contact us for more info

Serena
Jinan Xintian Technology Co., Ltd.
Tel/Whatsapp:+8615806603572
Skype:xtlaser0302
Email:xintian115@xtlaser.com

The difference between UV laser and fiber laser marking machine-Joey

How to choose the suitable fiber laser matking machine?

There are differences when it comes to deciding UV laser marking machine or fiber laser marking machine, so here are the differences:

1.Processing technology:

Fiber laser marking machine: It uses a 1064nm laser wavelength, and it is suitable for the absorption of metals and some non-metals. Especially for marking high hardness, high melting point, and brittle materials, it has more advantages. And the processing range is very wide.

UV laser marking machine:  it uses a laser wavelength of 355nm, it is more precise than the fiber laser marking machine in marking effect. It has greater advantages for high melting point and low molecular weight. So it’s suitable for marking machine processing in high-end industries.

2. Laser power:

Fiber laser marking machine: The power-on fiber laser marking machine is the mainstream at 10W / 30W / 50W,

UV laser marking machine :mainstream is at 3W / 5W / 10W. The consumption of  UV marker is lower than that of fiber laser marker, the thermal effect is small, and the damage to the material is small.

3. Heat/cold processing

Fiber laser : It is heat processing. After the surface of the material is irradiated with a laser beam, the surface absorbs laser energy . It causes metamorphosis, melting, ablation, evaporation and other phenomena, so it produces traces of processing.

UV fiber laser:  UV rays are with very high loading energy, it can break chemical bonds in materials (especially organic materials) or surrounding media. To cause the material to be destroyed by non-thermal process, leaving traces of processing, so there will be no thermal impact.

 

 

 

What service can I get form you?-Ariel

What service can I get form you?

What service can I get form you? We have many clients have this questions, especially when they want to buy a fiber laser cutting machine.

thinner

Actually,we understand as a buyer,we always worry about the quality,for machine,especially for service.

1.Door to door shipping:

Yes,we can contact our shipper to provide the door to door service.I have asked the shipper,after they replied me,will let you know.

2.Machine training:

Of course,this is one big machine,one of our engineers need go to your factory to install it and train your crews.
You only need to undetake the fees of engineers tickets,hotel and food,no extra commission for engineer.

Usually engineer will stay here 5-7days,depends on different models.

3.Customers reference:

Yes,we have customers who have bought our laser machines.
Their information is private,if you want to contact them,then we need to get their allowance in advance.
And for now,we didn’t talk any details of the machine,if finally,you make sure you will buy the machine,then i will contact them,cause it is not great to disturb customers again and again.
So after we help you solve your any confusions about machine,then we go to this step.
Hope you can understand it.

4.Warranty:

Sorry for confused you.The 5 years warranty was the last year promotion activity.I forgot to change the alibaba product template.Thank you for your reminding,we will change it in time.

For 5 years warranty,the machine cost is different,need to plus 5% cost.Some customers like to lengthen the warranty.
You know,the market is competitive,so great service will get more customers and good company reputation.

Our company warranty service is different as others:

In the warranty period,if it breaks down or some parts damaged (Except the human factors and the factors of force majeure),
we will be responsible for repair for free, the parts need to be replaced will be provided from us for free(Except the quick-wear part or Consumables).
[Many suppliers only have warranty,but all of the fees on customers.]

But even after 3 years warranty or 5years warranty(if you choose),any machine repairing,we still be responsible,just buyer need to pay the shipping cost and repair fees.
For machine,the service is always online till ending it’s life.

So as a manufacturer,we focus on quality and service.

Finally,any questions,contact us.

Ariel Liu

Whatsapp:+178 66940010

Email;xintian122@xtlaser.com

What do you need to know about fiber laser machine-Claudia

What do you need to know about fiber laser machine

What you need to know about fiber laser machine

1.Which payment options do you accept other than bank tranfers? 

Yes,of course,you can use Credit card to pay,its more convenient for you.

I think that you have Master card,right?then we can pay from our Alibaba trade assurance platform.
This platform also can protect your benefit,if we do not follow our permission.

2.In the event a part of the machine breaks, what are the steps I need to take to get it repaired or replaced? Do I need to send the machine back to you?

Firstly,for the fiber laser marking machine,its an easy machine,there is not any spare parts.
And we have 2 years warranty,if there is any parts break down(because of the quality problem),we will help you to change a new one,we pay the shipping cost,and engineer will support you how to change it by phone call,video call,or remote control.

3.Is a fume extractor needed to operate this machine in a closed enviroment? I have never used a laser marker before, so I would like to know if the marking process creates dangerous fumes.

Actually,if for fiber laser marker,its mainly for metal marking,there is a little smoke,almost no smoke,do not worry.

If you really worry about the fumes,we also provide customers the smoke exhaust:

Its USD500

This equipment will purify the smoke by inside circulation.Then there is no any smoke.

What do you need to know about fiber laser machine

4.What other accessories do you offer for this machine, that would be helpful to me?

We provide the protective eye glasses,that will help you to protect your eyes after a long time using.

Dimmer piece,that will help you to adjust the laser path,and when you think the laser is not stable,that will help you to check out the problem,engineers usually need it to support you when your machine need to check.

5.If the laser source or some other part fails after the warranty, what would the cost of the individual parts be to replace them?

For the fiber laser marking machine,the main parts are laser source,scanner head,control board.
So if after the warranty,you need to change the laser source,for 20w laser source,is USD2200,the scanner head is USD450,the control board is USD400.

So after your checking,you can share some of your ideas.

More details you want to know,contact us:

Claudia, Email:xintian126@xtlaser.com

Cell&whatsapp&wechat :0086 17852254044

Application of various laser marking machines-Leo

Application of various laser marking machines

Application of various laser marking machines: Fiber lasers have become a hot topic in laser physics research in recent years, and it has been unanimously considered as a new generation product that has the potential to completely replace solid-state lasers. With the development of laser equipment and there are more and more types of laser marking machines and the application industry is also expanding. But different laser marking machine applications are also in different fields. Kinds of applications. If you want to know more about the laser marking machine, you can consider to consult XT LASER, there will be professional to answer your questions.

CO2 laser marking machine

The applicable materials are mainly non-metal materials such as bamboo and wood products and paper and cloth leather and plexiglass and epoxy resin and acrylic and polyester resin and etc.

Fiber laser marking machine

Necessary equipment for improving efficiency, saving energy and pursuing quality.

UV laser marking machine

Industry applications: Mainly used in ultra-precision processing of high-end markets.

Fiber laser deep engraving machine

Industry applications and applicable materials: Suitable for all metal materials.The machine can mark high-resolution with very beautiful text and patterns on electroplating materials and coating materials and spray materials, plastic rubber, resin, ceramics and other materials.

3D laser marking machine

Suitable for laser marking of various metal or non-metal products with three-dimensional curved surfaces.

Fiber laser marking machine is the most advanced laser marking equipment in the world. It has the characteristics of good beam quality and small size and fast speed and long working life and flexible and convenient installation and maintenance-free.

XT LASER is manufactuere of fiber laser machines for more than 16 years.

Welcome to contact me:
Jinan Xintian Technology Co., Ltd (XT LASER)
Mob/Whatsapp: +86 18615250132            WeChat: 18615250132
Email: xintian131@xtlaser.com                    Skype: Leo Yuan
Web: www.xtlaser.com

what is MOPA laser

Should We Buy A Fiber Laser Marking Machine?-Serena

Should We Buy A Fiber Laser Marking Machine

Do you have an idea to DIY or buy an affordable Fiber Laser Marking Machine?

Check out the 2020 Laser Marking Machine buyer’s guide as follows,Fiber Laser Marking Machines are now taking the leading role in laser marking technologies.

There are multiple reasons why you should use fiber-based laser marking machines for your business. Some of them are:

#Mark all metals,some non-metals,many plastics and some ceramics.

#Higher output power(over 90%), excellent beam quality.

#More energy for deep engraving in metals.

#Marks are permanent ,and won’t disappear with time going by.

#A fiber laser marking machine has a very long lifespan of 100,000 hours, That is to say it will yield fat economic returns.

# Software driven enabling thousands of characters to be marked in a very short time.

#Creates heat that is precisely targeted ,and does not compromise the structural integrity of the material within or around the mark

#Fiber laser marking with no inks, acids, or solvents used, and nothing to explode or overheat.So,it is a safe process,

#It is an environmentally friendly solution ,on the other hand,it is also reliable.

#Perfect for resisting the sterilization process or medical and surgical equipment.

#Resistant to high temperatures.

How to choose a good fiber laser machine?

However,Knowing the benefits won’t be enough when you go out in the market to buy a good machine. There are a number of other factors that you must consider.

#Beam quality

First of all, you need to know about the beam quality. It is one of the critical parameters that impact how a laser is processed. Moreover, a good beam can be as small as 20 microns or even more,

and very suitable for dealing with materials including silicon and aluminum.

#Single or multi-mode

Secondly,Multi-mode allows for the beaming on larger components, the single-mode gives you a more precise and high-quality beam.

#Software

In addition,There are a number of different functions associated with these modern-day machines ,and most of them come from the software

20W/30W/50W table Fiber laser marking machine

 

Moreover,XTLASER will give better choice

If you are longing for further information about fiber laser machines, please feel free to contact us.

Jinan Xintian Technology Co., Ltd.

Serena

tel/Whatsapp:+86 15806603572

Email:xintian115@xtlaser.com

 

 

 

Fiber Laser Machine for Firearms Industry-Leo

Fiber Laser Marking System – Designed for Firearms marking & engraving

Work Principle

Fiber laser, it belongs to heat treatment, machine can mark signs on product by burn its surface.

Application

The laser engraving machine can be used for engraving on gun stock, gun barrel, gun magazine, gun magazine holder, gun cylinder, gun muzzle of rifles, semiautomatics, shotguns, handguns and other weapons.

Product Features

Advantages of The Best Laser Engraving Machine for Guns, Firearms, Weapons as follow:

Chamber, compact and safe.

High speed scanning galvo head.

Marking size: 100*100mm

Gun laser engraver adopts lifting wheel and measures to adjust the focus length conveniently.

IPG and Raycus(optional)

2D working table for X and Y axis moving.

Rotary device for option.

XTL-FP 30/50 Mini model

  • portable model
  • Raycus/IPG laser source
  • China Famous Galvo head
  • Manual/Motorized up & down.
  • It can fit 110*110mm working area.
  • Packing size:79*72*84mm
  • Weight: 96 KG
  • It can add somker

 

 

 

 

 

 

 

 

Samples

 

 

 

 

 

 

 

 

After sales service

  • XTLASER provide you Two years warranty for full machine,if some spare parts broken within warranty,we will repair it for free.
  • We have online after sales department,they can Speak English well,can from Email,whatsapp, FB, wechat, skype, phone call to solve your problems within 8 hours as the time difference.