The application of UV laser marking machine-Ariel

The application of UV laser marking machine

This article is about the application of  UV laser marking machine.

The UV laser machine  is a technology very different from CO2 and Fiber laser technology.

Today we are going to explain the main differences between this technologies.

Cold laser engraving

Also knows as the blue laser beam, this technology has the capacity of engraving with a low rate of heat.

The light wave or UV light spectrum of this machine is one of the main reasons this technology can engrave over different materials.

Because it doesn’t heat the material surface as the Fiber and the CO2 does.

It allows the UV laser mark clear and with high precision over all the plastics and other materials that have an adverse reaction with heat.


There are thousands of different mix of plastics, and all of them can be engraved for UV laser technology.

These are some of the most common plastics engraving with our laser engraver machine.


The UV laser it can engrave and mark metals, but not always with the same effect as the fiber laser engraver machine.

While a fiber laser can etch over the metal surface with deep effect and with a clear result.

The UV laser has problems engraving metals covered with painting, or metals highly reflective like the copper.

Check below the list of metals that the UV laser can engrave.


The UV laser is one of those technologies that can engrave over glass surfaces without a break or overheat the material.

You can create amazing engravings and patterns without splinter glass result.

Contact us for more details.

Ariel Liu

whatsapp:0086 17866940010

Popular UV laser marking machine in market-Eliza

Popular UV laser marking machine in market-Eliza

>>Firstly UV Laser Marking Machine picture

>>Second Machine feature

  • Firstly, cold light, no heat effect, minimal heat affected zone, no thermal effect, no material burning issue;
  • Secondly,355um UV laser focused spot is very tiny, suitable for very high precision marking.
  • Thirdly, Materials can absorb, and thus a wider range of applications;
  • Fourthly, Stable performance , small size, low power consumption.
  • Fifthly, High marking speed, high efficiency;
  • Sixthly, High speed galva mirror scanner.
  • Seventhly, Deft design brings good protection for the operator.
  • Eighthly, Easy operation,software supporting AutoCAD, Coreldraw, Photoshop etc.
  • Finally, Powerful software Text symbols, graphics, images, bar code, automatic layout and modify the qr code, serial number, etc

>>Third Applicable industry

  • The flexible PCB marking, scriping;
  • Plastic, like ABS;
  • Porous silicon wafers, blind hole processing;
  • LCD glass qr code marking, punching;
  • Metal surface coating glassware surface marking;
  • Plastic buttons, electronics, gifts;
  • Communications equipment, building materials and so on;
  • Ceramics;
  • Lens
Machine Mode XTL-UV5
Marking Scope 110*110mm
Laser wavelength 355nm
Min. character size 0.06mm
Laser power 5w
Power supply 220V/50Hz
Package size 92*80*157cm
Net weight 120kg
Gross weigh 170kg
HS Code 845611

Additionally, UV laser is optical fiber laser integrated structure, it has no optical pollution, no power of the coupling loss, compact structure compact, air cooling, with other laser don’t possess the high efficiency and reliability.

Here sharing with you the new marking samples on leaf by UV laser marking machine, it is just tested by our engineer, he has 15 year’s experience on laser machines, and has a good knowledge for parameters setting. He always do some interesting testing:










If you want to know about UV laser marking machine. Pls feel free to contact:



The role of water cooling and air cooling in the marking machine–Sven

The laser marking machine has two cooling systems, water cooling and air cooling. Whether the cooling device is water or air  depends on the power of the device itself. The role of water cooling and air cooling in the marking machine is the same, both play a cooling role. working normally.

In fact, whether it is water or air, the laser marking machine transmitter and the Q drive are generally cooled. General high-power laser equipment, the heat emitted by the laser is relatively large, so use circulating water cooling. For optical fiber and low-power CO2, because their power is relatively small, the laser does not have much heat. Air cooling is not only condenses the volume of the device, but also reduces the power consumption

For example, the power of semiconductor laser marking machines is relatively large. Generally, The water-refrigerating capacity is larger than air cooling system.

Air-cooling is generally suitable for small power CO2 marking machines, fiber laser marking machines, UV marking machines and other small power, and the cooling capacity is also ideal. Generally, semiconductor laser marking machines have the white cold water To ensure that the equipment works properly.

And no matter water cooling and air cooling, pay attention to:

1. Semiconductor series laser marking machine, do not perform production and debugging without water tank running or waterless, because semiconductor series laser machine belongs to high temperature thermal processing, water-free damage may cause serious consequences.

2.Whether it is water or air,its necessory to remove the dirt inside the water tank or fan and do the regular cleaning work.This not only has a good operability for the laser marking machine, but also greatly improves the equipment life. Guaranteed smooth at work.

The Top 4 Benefits of UV Laser Marking-lisa

The Top 4 Benefits of UV Laser Marking

fiber laser marking machine tutorial (2)

Manufacturers are increasingly requiring identification marks on their products to help with traceability. While the traditional marking method is typically ink printing. It’s out of date already, especially in the medical industry as ink that often easily removed, altered, or contaminated. That’s why many manufacturers have begun to use ultraviolet lasers to mark their products.

Laser marking makes it easy to identify parts and authenticity without a physical tool etching the surface of the part or transmitting any substances onto the surface. Instead, the laser light focused onto a material, producing damage-free, easy-to-read marks. Apple Rubber uses laser marking to add model numbers, bar codes, logos and more onto customer’s o-rings and seals.

Here are the top four benefits of utilizing UV laser marking in your manufacturing facility:

1. Flexible processing

Laser marking also used on many products in a variety of industries, including aerospace, automotive, defense DOD, medical and electronic components. Apple Rubber uses laser marking on virtually any o-ring or seal where product identification required.

In many industries, product authenticity and traceability is required by law. Automotive companies, for example, use part traceability to quickly determine when and where the part produced in the case of component failure, which helps for product recalls. Because of the importance of product identification, using a flexible and reliable marking technique is critical.

2. Overall speed

In traditional ink marking, printing equipment is often mechanically complex, requiring longer downtimes for maintenance and frequent cleanings. With UV laser marking, no prolonged downtime associated with cleaning or fixing a printer, and the overall engraving process is extremely quick and simple.

UV lasers are better absorbed than other wavelengths and marking techniques by virtually all materials, requiring less power to produce a clear mark. This makes the process even simpler since UV laser marking ensures a high-quality, high-contrast mark in one application.

3. Maximizes authenticity

UV lasers create easy-to-read marks that are far superior to printed marks or labels. Apple Rubber uses a high-quality laser that can focus in on smaller spot sizes and produce a high peak power, leading to crisp, clear marks on o-rings and seals. This ensures that parts can clearly identified and their markings cannot  altered or tampered with.

In the pharmaceutical industry, counterfeiting has become a huge issue with many social and economic implications. Since pharmaceutical manufacturers are limite in what types of markings they can use, they must choose an option that is tamper-proof, easy to read, compatible with their specific environment and cannot alter the product. Because of these requirements, laser marking is the best choice in this industry and many others that require complete authenticity in their products.

4. Minimizes contamination

While the ink in traditional marking methods is non-toxic, the printing equipment often utilizes lubricants and solvents that can become airborne and contaminate printed products. Medical manufacturing often requires completely sterile products that produced in a classified cleanroom. In this case, traditional marking would not be acceptable.

During the laser marking process, the marking device does not come into direct contact with the product, allowing for clean operation with minimal contamination. This creates a product identification option for industries that require sterile products. And ensures that outside materials will not cause future contamination of a product.

Want to talk more about laser marking?


Mob/whatsapp: 008615954124625

Contact person: Lisa Wang

Industrial Application of UV Laser Marking Systems-Lisa

Industrial Application of UV Laser Marking Systems-Lisa

Before discussing the industrial applications, let’s know what laser marking is. Laser marking is a process which to leave marks on an object. Which may also include the color change caused due to chemical or molecular alteration, foaming, melting or more. The method does not include the use of inks. It also does not use tool bits which contact the engraving surface and wear out. This gives it the advantage over other marking technologies where we use inks orbit heads which to be replaced regularly.

Laser marking has more pronounced impact on the laserable materials which specially designed and sometimes also for some paints. These materials may also include new metal alloys and polymers which are laser sensitive.

Sometimes, Laser marking can also used as a common term which covers a broad spectrum of surfacing techniques which include printing, hot-branding and laser bonding.

Here we are going to discuss a specific type of laser marking systems i.e. UV laser marking systems. Read on to learn the industrial applications of UV laser marking systems:


  • UV laser marker is known to provide extraordinary performance. This system represents the perfect solution for both the direct part marking and also label marking in almost every market segment. These market segments include automotive, healthcare, solar, medical or surgical tools marking, electronics as well as packaging and many other applications. For more information, you may search UV Laser Marking Machines.
  • UV laser marker systems are providing help in a varied range of industries right from the automotive industry to the healthcare and packaging. This can be the result of the feature that these systems provide power in different ranges. You may find a system according to the desired power range.
  • Some of the UV laser markers are available with the wavelength of around 355 nm. Due to the high repetition rate, they are particularly suitable for marking plastics. They can reach very high speeds. As high speed is indispensable for short cycle times in industrial manufacturing environments. These systems often used in those applications.
  • Also, they are capable of providing high peak powers, so one of the application area s for these systems are fine marking and structuring. They are used in such a way that there is no thermal impact on glass applications or ceramics.

  • An excellent quality for micro material processing and classical laser marking applications.
  • Due to their diverse features, they are also application in medical/ pharmaceutical and cosmetics industries. In these industries, these systems deter tampering and counterfeiting. These applications help to ensure lifetime brand protection and be traced.
  • UV laser marking systems find applications in those areas where high contracts marking and required coding. For example, an UV laser marking system can mark up to 250 products per minute without any distortion of code on the rotary devices.

Above mentioned application describe the ways how UV laser marking systems used in various industries. These systems use the extensive experience and success of its efficient components and represent the architecture of THG where THG stands for third harmonic generation. Many of these systems use the extra cavity technology which allows high-efficiency conversion of a nonlinear crystal and compactness of the laser source. If you wish to know more about them, you can search UV Laser Marking Systems.

Take you learn about UV laser marking machine-Ariel

Take you learn about UV laser marking machine

There are many laser types, one of is UV laser.So today we will take you learn about UV laser marking machine.

UV laser marking machine takes 355nm pumped purple light laser device as the light source and then takes advantage of previous generations machine to gain smaller diameter of focusing spot and fine marking effect. With smaller heat affected area and more beautiful marking effect, so our products can meet customer’s demand of higher marking requirements.


(1)  Design on laser cavity adopts a series of optimization method.So as to ensure the beam quality as the fundamental mode.
(2) The machine takes 355nm pumped purple light laser device as the light source. Narrower pulse width and smaller heat affection contribute to generate peak power. The higher the peak power is, then the wider the adapting range of materials is. So this implement perfect printing in some relatively hard material.
(3) Higher pulse stability, then namely better pulse consistency of laser produces the same carving effect, so it’s very suitable for precision marking. Higher pulse repetition frequency meets the need of quick marking and then high production efficiency.
(4) High efficiency of the photoelectric conversion and long service life.
(5) It can mark date, bar code and two-dimension code automatically.
(6) Superior performance, stable, high conversion rate and low energy consumption.


(1)Usingin electronic components, battery chargers, electric wire, computer accessories.And then mobile phone accessories (mobile phone screen, LCD screen) and then communication products.(2) Automobile and motorcycle spare parts, auto glass, instrument appliance, optical device, aerospace, military industry products, hardware machinery, tools, measuring tools, cutting tools, sanitary ware.
(3) Pharmaceutical, food, beverage and then cosmetics industry.
(4) Glass, crystal products, arts and crafts of surface and internal thin film etching, ceramic cutting or engraving, clocks and watches and glasses.
(5) It can mark on polymer material, majority of the metal and non-metal   materials for surface processing and then coating film processing, then to light polymer materials, plastic, fire prevention materials etc..


Any questions,pls feel free to contact me.

Ariel Liu

whatsapp:0086 17866940010

The Introduction of ABS Laser Marking Machine-lisa

The Introduction of ABS Laser Marking Machine-lisa

ABS is a kind of BS (styrene-butadiene rubber), PB (polybutadiene),  PBA (butadiene rubber) dispersed in AS (acrylonitrile-styrene copolymer) or PS (polystyrene) multi-component polymer. Due to the different ratios, different properties and melting temperatures can be obtain. If the ABS is blend with other plastics or additives, it can be expanded to ABS for different uses. Such as impact grade, flame retardant grade,heat resistance,transparent grade, electroplating grade, enhanced grade, etc. Based on the characteristic of ABS material, the laser marking machine can mark on the ABS material. ABS has very good flame retardancy,which widely used in electronics, electrical appliances, and communication equipment. since

Buy the best ABS laser marking machine

The ABS laser marking machine absorbs laser energy and converts the laser beam into heat energy, which generates heating, evaporation carbonization and chemical reaction. For different plastics chemistry, there are different varieties of light-color laser markings on dark backgrounds and dark laser markings on light-color backgrounds, which are suitable for black, white, yellow and gray marking on materials such as nylon.because
1, UV laser marking machine marking plastic has better effect ,but more expensive. UV laser does not have heat, so will not burn the plastic surface , the pattern is more beautiful. It is popular to use for mobile phones LOOG,  high-end cosmetic case,mobile phone charger, FPC circuit board,  high-grade tableware, high-end watch,glass porcelain, bottle cap QR code etc. but

2, fiber laser marking machine, affordable  price is about $2600~$4000, the shortcomings have higher requirements for plastic materials. It must be pure material, can not dope with any nozzle material. It is necessary to add laser engraving powder to the plastic raw materials to achieve the idea effect.

Any more information if you need, just let us know.


What’s the difference between UV laser and Fiber laser marking machine? lisa

What’s the difference between UV laser and Fiber laser marking machine? (lisa)

Fiber Laser marking machine and UV Laser Marking machines. The both machines can engrave a lot of materials, plastics, leather, metals, and others. However, whats the main difference and why one is much more expensive than the other?Here we are going to explain whats the difference between these two technologies and what are their primary use. because

1.Laser generator

UV laser marking machine:

It is with 355nm UV laser.

The machine uses third-order cavity frequency multiplication technology compared with infrared laser(fiber laser,Co2 laser). The 355UV light focusing spot is extremely small, which can greatly reduce the mechanical deformation of the material and Small processing thermal effect. since

Fiber laser marking machine:

The wavelength is 1064nm.

With regard to the wavelength of laser light, the shorter the wavelength, the smaller and higher accuracy the laser spot, and the smaller the heat affected zone formed during processing, the more exquisite the processing effect.


2.The basic working principle of laser processing materials:

Infrared laser (Co2 laser and fiber laser marking machine)

The substance of the material surface is heated and vaporized (evaporated) by laser, this way, the material removed, this approach is often referred to “thermal processing”.


UV laser marking machine

High-energy UV photons directly destroy the molecular on the surface of the material, this way, molecules removed, the process does not produce high heat and it is called “cold processing

3.The machine structure

The main structure of this machine by outlook may look similar, but the technology that these machines use inside is different.

The fiber laser uses a different power supplier than the UV laser,

Other of the difference is that the UV laser needs to be refrigerated by a water chiller,while the Fiber laser is refrigerated only by air.


These machines are design for different material engraving solutions

The fiber laser engraving machine has as a primary use engrave and offer solutions to the metal marking industries, this machine it can mark, engrave (see the difference between engraving and mark) and carve over all the metal materials. but

Moreover, the UV laser is designe to be a practical solution for marking plastics and glass . The UV laser machine it can engrave a vast number of materials, from metals to paper. Check the list of materials that this machines can engrave and mark.

Any information, please let us know.

Mob/whatsapp: 008615954124625


Introduction of UV laser marking machine-Ariel

Introduction of UV laser marking machine

This article is about introduction of UV laser marking machine.

There are many laser types,like fiber laser, MOPA laser, UV laser ,Co2 laser and green laser.Every laser has his advantages.Today we will introduce UV laser marking machine to you.Nowadays more and more people choose UV laser marking machine.Because it has high efficiency, less material consumption and permanent marking.

First the theory of this model. We use the laser beams to permanently mark different surfaces of matter.  The marking effect is the direct breaking of the molecular chain by the short-wavelength laser. Thus the machine can mark on the material.

Second the advantage of this model. The ultraviolet laser has a very small focusing spot and a small heat-affected zone. Therefore it can fastly mark. And it is customer’s first choice for marking effect. Because it will not produce the thermal effect and the material don’t have the burning problem. And it has fast marking speed,high efficiency, stable performance and small size.

Thirdly it is especially suitable for the high-end market of ulta-fine processing. For example, the surface marking of packaging bottles of cosmetics,medicines, foods and other materials. And it marks clearly and firmly.It can also mark in the flexible PCB, scribing,silicon wafer microhole, glass surface drilling,material surface marking,electronic components,gifts, communication equipment,building materials and so on.


Ariel Liu

whatsapp:0086 17866940010


What you should know before buying an optical fiber laser engraving machine-Bunny

Are you considering buying a fiber optic laser machine to mark your materials? You do not know which power or work area is the most suitable for you? In this blog we will explain the differences and most importantly we will give you a guide as detailed as possible to help you choose the right machine for your work.

What kind of material are you going to record?
It is very important to know what type of material is going to be recorded, since this depends on the type of machine you are going to choose, it is here that we have 3 types of very popular machines when it comes to high speed engraving.

UV marking laser

This machine can engrave any material, from paper, wood, metal and glass to leathers or fabrics. But the real wonder of this machine is that it can record any type of plastic that will open the windows to mark in many industries.

The disadvantage? They have a high cost compared to other engraving machines.

Fiber Optic Engraving Laser

It is here that he begins to see a difference, since these machines design exclusively for engraving on metals. However, they can record on some plastic materials, leather and jeans, this means that you will not be able to record on glass or on any plastic. It should be noted that its primary use is to mark any type of metal. Advantage that they have quite affordable prices.

CO2 laser engraving

The CO2 laser with galvanometer head is quite fast compared to a conventional CO2 CNC machine, while a normal CO2 engraving laser machine marks at 6000MM per minute, our high speed CO2 engraving machine can record at 6000MM per second on any non-material metal. such as Jean, fabrics, paper, granite, leather, acrylics, glass, some plastics, wood, among others.

Advantages: it can cut paper, leather and thin raft wood at high speeds.

Disadvantages: which can also be expensive.

Work area to work

The type of work area you want to work on is very important. This depends on the type of lens you need to record and the type of power you need to record on a large area.

The smaller the work area you want to record, the less power you will need and a smaller lens will be required, this will make the machine quite economical.

But this is where the important thing comes, many people only need to record a small work area, (examples, rings and bracelets, platelets for machines, dog plates, marking platelets for cows, platelets for containers etc.) a number of applications that only require a small work area which can make your machine easy to acquire.

At the same time other people or companies require a larger area of engraving, (examples, marking Jean pants, denim, or fabrics) these machines require a working area of 130x130CM or more which can make the machine a little more expensive.

It is important to know the work area to know how much money we will need to buy our machine.

Laser marking speed

It is important to know what type of speed you need, because some companies or people require a very high speed of engraving or marking on different materials. This can only achieve with a head layer achieving high quality with high speed and with a high quality laser source. Normally the default speeds that the machines we sell are 3000mm per second. But some customers or companies need speeds greater than 8000mm per second. This in order to install the machines in assembly or packing chains. This also results in a higher cost machine. If you are looking to record at speeds dozens of materials per minute then you should consult us beforehand to give you an exact quote.