Cleaning cultural Relics with fiber laser cleaning machine-Ariel

Cleaning cultural Relics with fiber laser cleaning machine

This article is about cleaning cultural Relics with fiber laser cleaning machine.Because of the age of the cultural relics preserved now, the surface has more or less different levels of pollutants, such as mold, dust, and insect spots.

Cultural relic cleaning, as an important and irreversible link in the process of cultural relic restoration, not only requires a comprehensive understanding of the status quo of cultural relic preservation before cleaning, but also requires the selection of appropriate cleaning technology.
Traditional cleaning methods include mechanical cleaning methods, chemical cleaning methods, and ultrasonic cleaning methods.

There is a risk of residues and scratches on the surface of the utensils.The environmental protection and high accuracy requirements terms limit these cleaning methods.

For example, mechanical methods cannot meet the requirements of high cleanliness cleaning, while chemical cleaning methods easily cause environmental pollution, and the cleanliness obtained is also very limited.

Although the ultrasonic cleaning method has a good cleaning effect . And it has no effect on the cleaning of sub-micron scale particles.

Now Laser cleaning technology is a new type of cleaning technology developed rapidly in the past ten years. And it is gradually replacing the traditional cleaning process in many fields.

Compared with traditional cleaning methods, laser cleaning machine technology has the following advantages:

(1)Laser cleaning is a selective cleaning technique that keeps the surface of the substrate intact.

And for different contaminants on different substrate surfaces. It can set laser parameters to selective clean the contaminants without  damaging the substrate
(2)The laser cleaning waste is basically solid powder, small in size, easy to store. And basically does not cause pollution to the environment.So  It’s a “green” cleaning process.
(3) Laser cleaning is a kind of non-contact processing, which can easily realize long-distance operation.

When combined with robot or manipulator, it can clean parts that traditional methods are not easy to reach.

So laser cleaning machine.
(4) laser cleaning can remove different types of pollutants on the surface of various materials to achieve a high degree of cleanliness. It including dust, mud, rust, paint, oil, etc.

Laser cleaning technology is a non-contact cleaning technology. Compared with traditional cleaning methods.It can clean a variety of surface contaminants, has minimal environmental pollution, and can not harm the substrate.

And At present, this method has become an important supplement and extension of traditional cleaning methods.

Anyway, If you want to know more about our products, please contact us.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

 

Popular fiber laser cleaning machine-Teresa

Popular fiber laser cleaning machine

Popular fiber laser cleaning machine.

Laser cleaning is widely in various industries, such as shipping, auto parts, rubber mould, high-end machine tool, tire mould, rail, environmental protection and other industries.

Advantages:

Firstly,Non-contact cleaning, without damage to parts matrix.

Secondly, Precise cleaning, with accurate location, precise size and selective cleaning.

Thirdly,No chemical cleaning fluid, no consumables, safe and environmental protection.

Fourthly,Simple operation, the power can be charged, and the automatic cleaning can be realized by hand or with the manipulator.

Fifthly,Cleaning efficiency is very high and saving time.

Finally,The laser cleaning system is stable and little maintenance requirement. 1.2 Laser cleaning application

Some notes about machine using:

  1. When the laser cleaning machine is working,Do not point the laser output head to the orientation of the person, and do not make the laser output head from illuminating the surface of the high anti-material (such as copper, aluminum, mirror stainless steel and other surface reflective materials).
  1. Wear labor protection articles as required, and wear protective glasses that meet the requirements in the vicinity of the laser beam.
  1. If the laser does not shut down normally, the next opportunity is in the alarm state, which will affect the life of the laser. Life. Check whether the laser function button switches need to reset before starting the machine.

So if you are looking for rust,paint,oil,dust,etc cleaning machine.The laser cleaning machine is more suitable for you now.

It is better to send us  your products sample pictures,then we can help you to make sure the machine can do your work or not.

And if you  have time,you can tell us how many pieces you want to clean,we need to confirm the power.

Any questions,we can have a further discussion.

Contact us.

Email:xintian105@xtlaser.com

Whatsapp:+8615006829603

Cultural Relics with fiber laser cleaning machine-Ariel

Cultural Relics with fiber laser cleaning machine

This article is about Cultural Relics with fiber laser cleaning machine.

Nowadays fiber laser cleaning technology is widely used in our daily life.It can remove most rust, oil on the metal surface. Today we would like to introduce more advantages of fiber laser cleaning machine.

Cultural relics surface has more or less different levels of pollutants.But fiber laser cleaning technology  can clean them with a better effect.

 

Such as mold, dust, and insect spots. Cultural relic cleaning requires a comprehensive understanding of the status quo of cultural relic preservation before cleaning.

As a result, Traditional cleaning methods include mechanical cleaning methods.

There is a risk of residues and scratches on the surface of the utensils.

 

Compared with traditional cleaning methods, laser cleaning technology has the following advantages:

(1)Laser cleaning is a NEW cleaning technique that keeps the surface of the substrate intact.

On different substrate surfaces, the parameters of the laser can be set to selectively clean the contaminants without damaging the substrate.

2)The laser cleaning waste is basically solid powder, small in size, easy to store, and basically does not cause pollution to the environment.

It’s a “green” cleaning process.

(3) Laser cleaning is a kind of non-contact processing, which can easily realize long-distance operation.

(4)  laser cleaning can remove different types of pollutants on the surface of various materials to achieve a high degree of cleanliness, including dust, mud, rust, paint, oil, etc.

Above all, Laser cleaning is a non-contact cleaning technology.

It can clean a variety of surface contaminants.

It has minimal environmental pollution and can not harm the substrate.

And At present, laser cleaning mahcine has become an important supplement and extension of traditional cleaning methods.

If you want to know more about our products, please contact us.

Rust remover fiber laser cleaner,fiber laser cleaning machine-Jill

Rust remover fiber laser cleaner,fiber laser cleaning machine-Jill

Rust remover is widely used in the rust removing field.

 

1.Firstly video.

Here we share some rust removing videos by fiber laser cleaning machine.

https://youtu.be/OZ1eSYXPSHQ

https://youtu.be/-QQRoXSPwJI

https://youtu.be/swVXimJcdmc

https://youtu.be/2xAVGHJ6WeM

https://youtu.be/-our72cT2Dg

https://youtu.be/KKAh82bY7B8

https://youtu.be/CYOenlU0Ae0

 

2.Secondly,sample pictures.

Here we share some cleaning samples.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Thirdly,Cleaning  application.

XT Laser laser cleaning machine is easy to install, control, and implement automation. With Simple operation, switching power supply, open the device, then it can be achieved cleaning without chemical reagent, medium and water washing.

It has many advantages of the focus adjustment manually, joint surface cleaning, higher cleaning surface cleanliness, it also can remove the surface of resin, grease, stains, dirt, rust, coating, coating, paint on objectives.

A. Firstly, Removing rust from metal surface.
B . Secondly, Surface paint stripping treatment .
C .Thirdly,Surface oil stains, stains, dirt cleaning.
D.And also,Surface plating and coating removal.
E.Next,Pretreatment of welding surface / spray surface.
F.Also,Removal of dust and attachments on stone surface.
G.And Rubber mold residue cleaning.

 

4.And also,Fiber cable length is also important.

Firstly,100w:3m.

Secondly,200w:5m.

Thirdly,300w:5m.

And 500w:10m.

 

For more detailed applicatin,feel free to contact us.

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

The working principle of fiber laser cleaning machine -Ariel

The working principle of fiber laser cleaning machine

Fiber laser cleaning machine is becoming more popular and popular now. So today we will talk about the working principle of fiber laser cleaning machine.

Firstly, powerful, short pulses, fast moving laser pulses act on the surface of the target, producing tiny plasma ruptures, shock waves, thermal stress, etc. Causing the surface material to sublimate and evaporate. The focused laser beam is capable of accurately evaporating surface objects or dirt in Metal fiber laser cleaning machine usage

Secondly, laser cleaning is suitable for metal surfaces. The processed and optimized laser beam does not alter metal properties. It is damage those laser treated surfaces.

Thirdly, the precisely tuned laser beam acts only on the coating, residual residue or oxide. And does not harm the underlying surface of the parent metal. By adjusting other parameters, the laser beam can accurately and easily achieve the desired cleaning effect.

Fourth, Surface peeling principle:  A laser pulse with a large energy. But in a short time reflects the laser light on the surface of the substrate. And the stripping process ends. The surface of the blank substrate reflects the laser. The stripping process ends. Metal materials cannot damage or melt with the correct laser parameters and optimal wavelength

Fifth, the coating layer is vaporized (falling due to sublimation) Removed due to pressure caused by high temperature

Sixth, the “green” cleaning method can easily solve the environmental pollution problems caused by chemical cleaning; No grinding and non-contact cleaning. The traditional cleaning method is often contact cleaning. It has mechanical force on the surface of the cleaning object. The surface of the object or the cleaning medium adheres to the surface of the object to be cleaned. Through fiber optic transmission, it is compatible with the robot and the robot to easily realize long-distance operation. It can clean the parts that are difficult to reach via traditional methods.

Finally, wide range of applications.  Laser cleaning can remove various types of contaminants on the surface of various materials. In order to achieve the cleanliness.

In general, laser cleaning does not damage the substrate laser.

Ariel Liu

Email:xintian122@xtlaser.com

What Are The features Of Fiber Laser Cleaning Machine?-Wendy

What Are The features Of Fiber Laser Cleaning Machine?

As we know, fiber laser cleaning machine very popular in the market.Laser cleaning machine relative to the traditional cleaning machine What are the advantages?

Today, XT LASER will share more information about laser cleaning machine.

Laser cleaning machine advantages:

if  1, the laser cleaning is dry cleaning, no exhaust emissions, does not cause environmental pollution, cleaning residues through the vacuum cleaner recycling.

So 2, can effectively clean the other method is difficult to remove the clean surface adsorption of submicron particles.
if  3, the laser can be transmitted by optical fiber, and robots and robots to match, easy to achieve long-distance operation, to clean the traditional method is not easy to reach the site, which in some dangerous places to use to ensure the safety of personnel;

if 4, the laser cleaning efficiency, save time, lower cost.

so 5, good controllability, high flexibility, easy to implement constituency, real-time precision cleaning.if 
if  6, the heat-affected zone is small, for light stripping cleaning is to open the material bond, no thermal effect on the surrounding material without thermal damage. No damage to the mold – to extend the life of the mold.however 
so 7, car tire mold can be achieved online cleaning, cleaning speed (≦ 25 minutes / deputy), easy to operate, without any supplies (except electricity) and chemicals.so
if  8, the purchase of laser cleaning system Although the previous one-time investment is high.

but the cleaning system can be long-term stable use, low operating costs, few warranty requirements.

That why most of customer want to buy laser cleaning machine for their work.Even if the price is expensive.

Hope this information is helpful for you.if you have any questions of machine,welcome to contact us.

Sales Manager:Wendy Ning

Mob/whatsapp:+86 131 7667 1529

Skype:XT Wendy Ning

Email:xintian112@xtlaser.com

If you have the times,welcome to visit XT LASER factory.

Principles and advantages of laser cleaning technology(2)–Winnie

Laser cleaning has the characteristics of no grinding. Non-contact, no thermal effect and suitable for objects of various materials, etc.  And is considered to be the most reliable and effective solution.

1 Laser cleaning principle

Laser irradiation on the surface of the object to be cleaned can produce at least three effects:

(1) Thermal expansion effect

That is, the difference in absorption coefficient of a certain wavelength of laser energy between the substrate and surface contaminants is used to cause the substrate material and surface dirt to absorb energy to generate thermal expansion. When the expansion force of the dirt is greater than the adsorption force of the dirt on the substrate. The dirt will separate from the object surface;

(2) Photolysis or phase change of molecules

The laser can achieve a high concentration of energy in time and space. The focused laser beam can produce high temperatures of thousands of degrees or even tens of thousands of degrees near the focus. Causing the dirt to evaporate, vaporize or decompose instantly;

(3) Vibration of laser pulse

The high-frequency pulse laser use to irradiate the surface to clean. The laser beam can generate ultrasonic vibration on the solid surface to generate mechanical resonance to vibrate the dirt layer or condensate.

2 Advantages of laser cleaning

 

More environmentally friendly: No chemicals or cleaning fluids need. Firstly the cleaned waste is basically solid powder, small in size, easy to store, recyclable, and non-photochemical reaction, and no pollution.
Good effect: laser cleaning has no grinding, non-contact, no thermal effect, will not produce mechanical force on the object to clean, will not damage the surface of the object, will not damage the substrate, and will not produce secondary
Easy to control: The laser can transmitte through the optical fiber, cooperate with the robot to achieve long-distance operation, and can clean the complicated parts that are difficult to reach by traditional methods. Finally this feature also makes the safety of the operator in some dangerous places more secure.
Widely used: laser cleaning can remove various types of contaminants on the surface of various materials.  Then achieving a degree of cleanliness that cannot achieve by conventional cleaning. So it can also selectively clean contaminants on the surface of the material without damaging the surface of the material.
Low cost: The initial investment of the laser cleaning system is high, but it also can use stably for a long time. And the service life is up to 10 years. The operating cost is low. The speed is fast, the efficiency is high, the time is save, and the return on investment can quickly obtaine. In the long run, so the cost ratio Traditional cleaning methods are lower.

Principles and advantages of laser cleaning technology(1)–Winnie

In industrial cleaning, traditional cleaning has a variety of cleaning methods, mostly using chemical agents and mechanical methods for cleaning.

There are mainly mechanical cleaning method, chemical cleaning method and ultrasonic cleaning method. At present, these three cleaning methods dominate the cleaning market in China, but their application is greatly restricte under the requirements of environmental protection and high precision.

Mechanical cleaning

Can not meet the high cleanliness cleaning requirements, easy to damage the surface area of the workpiece being cleaned.

Chemical cleaning method

It is easy to cause environmental pollution, and the degree of cleanliness obtained is also very limite. Especially when the dirt composition is complex, multiple cleaning agents must use to repeatedly clean to meet the requirements of surface cleanliness.

Ultrasonic cleaning method

Although the cleaning effect is good, the cleaning of sub-micron dirt particles is powerless. The size of the cleaning tank limits the scope and complexity of the processed parts, and drying the workpiece after cleaning is also a major problem.

Due to the increasing awareness of environmental protection and safety. The requirements of national environmental protection regulations are becoming more and more strict. And the types of chemical drugs that can use in industrial production cleaning will become fewer and fewer. In this case, the laser cleaning technology is gradually replacing the traditional cleaning technology due to its unmatched advantages.

Common questions about laser cleaning machine-Ariel

Common questions about laser cleaning machine

This blog is about common questions about  laser cleaning machine.

laser cleaning machine

1.Application

Firstly,  Metal surface cleaning
Secondly,Removal paint of metal surface
Thirdly, stains cleaning on the surface
Fourthly, Surface coating cleaning
Fifthly, Pre-treatment of welding surface cleaning
Sixthly, Stone surface cleaning
Moreover, Rubber mold residue cleaning

2.Common laser powers

We have 100w,200w,300w and 500w can be chose. And he larger the laser power, the faster the cleaning speed. Also Their cleaning effect are similar. About laser source brand, we have Raycus and IPG, one is best brand in China, the other is Germany brand.

3.Lifespan

The life of his cleaning machine depends on its laser source.In theory, it has 100,000 hours lift. So it has no problem to use 6-7 years.

4.Quick-wear parts

The cleaning machine has no other accessories and the protective lenses are wearing parts. 
However, if the exhaust system is used well, it is no problem. Protective lens is less than 
100RMB, the price is not high.

5.Warranty
We offer two years warranty for whole machine.If you have any questions,our after-sales will 
reply u online.

6.Advantages

1.non-contact cleaning, does not damage the part substrate.

2.precise cleaning, can achieve precise location, the exact size of the selective cleaning.

3.laser-cleaning-machine without any chemical cleaning fluid, no supplies, safety and environmental protection.

4.simple operation, power can be hand-held or with the robot to achieve automated cleaning.

5.cleaning efficiency is very high, save time.

6.laser cleaning system is stable, almost no maintenance.

At least, any questions, Contact us:Ariel Liu  Email:xintian122@xtlaser.com   whatsapp:0086 17866940010

Fiber Laser Cleaning Machine in the Cultural Relics- xtlaser- Bonnie

Fiber Laser Cleaning Machine in the Cultural Relics

Laser Cleaning Machine has many advantage.

Cultural relics surface has more or less different levels of pollutants.

Such as mold, dust, and insect spots. Cultural relic cleaning requires a comprehensive understanding of the status quo of cultural relic preservation before cleaning.

As a result, Traditional cleaning methods include mechanical cleaning methods.

There is a risk of residues and scratches on the surface of the utensils.

That is to say, These cleaning methods are limit environmental protection.

Laser cleaning technology is a new type of cleaning technology developed rapidly in the past ten years

It is gradually replacing the traditional cleaning process in many fields.

Compared with traditional cleaning methods, laser cleaning technology has the following advantages:

(1)Laser cleaning is a NEW cleaning technique that keeps the surface of the substrate intact.

On different substrate surfaces, the parameters of the laser can be set to selectively clean the contaminants without damaging the substrate.

2)The laser cleaning waste is basically solid powder, small in size, easy to store, and basically does not cause pollution to the environment.

It’s a “green” cleaning process.

(3) Laser cleaning is a kind of non-contact processing, which can easily realize long-distance operation.

When combined with robot or manipulator, it can clean parts that are not easily reached by traditional methods.

(4)  laser cleaning can remove different types of pollutants on the surface of various materials to achieve a high degree of cleanliness, including dust, mud, rust, paint, oil, etc.

Above all, Laser cleaning is a non-contact cleaning technology.

It can clean a variety of surface contaminants.

It has minimal environmental pollution and can not harm the substrate.

At present, laser cleaning mahcine has become an important supplement and extension of traditional cleaning methods.

If you want to know more about our products, please contact us.