The benefit of sealed laser marking machine-Ariel

The benefit of sealed laser marking machine

Hello,this is Ariel again from XTLASER,nice to meet you.I am in charge of European market.So today we will introduce one of the popular fiber laser marking machine.The benefit of sealed laser marking machine.

Fiber laser marking machine consists of standard portable fiber laser marker, separate fiber laser marker, handheld fiber laser marker, and sealed fiber laser marker.

The sealed fiber laser marker is the cleanest one.

Sealed fiber laser marking machine, as its name supplies, is an integrated fiber laser marker covering by specially designed metal shell.

It looks like a wardrobe or a refrigerator, taking up a smaller space than other types of fiber laser makers.

This kind of machine can create an ideal work environment for the owners.

Firstly, the sealed metal shell can isolate the machine body from the dust or erosion of damp air.

It can effectively prolong the lifetime of the machine and keep its good marking performance as well.

Advantages of fiber laser marking machine

Users only need to clean the metal shell rather than go deep into the screws and joints to clean all the machine components.

In addition, sealed fiber laser marking machine can offer a quiet marking process with producing few noises.

When processing the materials, users just need to open the door of sealed fiber laser marking machine.

And then put the materials inside and close the door afterwards.

Then set up the marking patterns on the connected computer and wait for the marking result.

In this process, the sealed fiber laser marker is just like a magic room .

Besides, as mentioned above, sealed fiber laser marking machine only takes up a small place.

So that it’s pretty suitable for small workshops, stores, homes or somewhere that has strict requirement for space.

This is also one of the reasons why sealed fiber laser markers are widely popular by users.

Contact us for  more details.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

The difference between 50W and 30W fiber laser marking machine-Ariel

The difference between 50W and 30W fiber laser marking machine

What is the difference between 50W and 30W fiber laser marking machine.We will talk about it in this article.

 

The higher the power, the higher the price, the most commonly used models.

Fiber laser marking machine selected 30 or 50 What about it? Where is the difference?

The appearance of the machine is not visible, what is the difference between the machine, just look at the laser of the machine.

Then the difference between the 20w/30w/50w fiber laser marking machine is different.

Because the power is different, the price is different, then the power The difference is that:

The 20W fiber marking machine has a higher laser peak value, and the masking surface will be wider than the 10W fiber marking machine.

In addition to the ultra-precise processing, the 20W fiber marking machine is popular among most of the processing manufacturers in terms of application surface and efficiency.

The speed of 20W marking is also faster than that of the 10W fiber marking machine, and the selection rate is as high as 60% or more.

As for the 30W fiber marking machine and even the 50W fiber marking machine fiber optic marking machine, as long as some special products are applied.

Such as deep carving, deep ink stripping, small cutting, etc.,

Because of its higher price, the selection rate is lower.

In general, if the company has fewer marking products and only has the appearance effect, the 20W optical fiber marking machine of the procurement platform is enough.

And the two words are worthwhile.

If it is a processing household, then of course the efficiency is the main factor, and the 20W fiber laser marking machine equipment is proposed.

If u want to learn more about the fiber laser industry, pls contact with me:

Email: xintian122@xtlaser.com

mobile/whatsup:+8617866940010

 

60w JPT MOPA laser engraving machine in jewelry industry-Ariel

60w JPT fiber laser engraving machine in jewelry industry

If you do jewelry business, we recommend you choose 50w Raycus or 60w JPT laser engraving machine.We will introduce the 60w JPT MOPA laser engraving machine in jewelry industry.

What is the principle of fibre laser marker

What is the principle of fibre laser marker

50w Raycus and 60w JPT

When customers need to do much deep engraving or cutting work,they will always choose 50w or 60w.

We sell many 50w Raycus and 60w JPT LM1+ laser to jewelry industry,firearms gun industry.
Accordign to customers’ feedback,customers say 60w JPT cutting engraving speed is better than 50w Raycus.

Note:Both of 50w Raycus and 60w JPT is good laser source.

Why 60w JPT speed is faster?

Here we explain why 60w JPT laser cutting speed is faster.

Frequency range and single pulse energy is higher,the cutting energy and precision is better.
Pulse width changing scope is wider,the cutting edge and cutting effect is better.

Single pulse energy determines the speed much.

Mopa JPT can mark color

Besides,Mopa JPT LM1+ can also mark some color on stainless steel.

But it is so-called Mopa,it can only mark some very limited color.

If your main work is mark color,you can choose JPT M1+ and M6+ series.

Jewelry industry samples

Here share you a video for reference.

Our sugesstion is that you can choose 60w JPT laser if you have enough budget.Most clients choose 60w JPT MOPA laser engraving machine in jewelry industryIts cutting effect and cutting speed will be better.If not,you can choose 50w Raycus.

Any other questions,pls feel free to contact us.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010.

Popular mini split fiber laser marking and engraving machine-Ariel

Popular mini split fiber laser marking and engraving machine

Hi,dear friend,This is Ariel again from XTLASER,responsbile for European market.Thanks for your attention to our fiber laser marking machine on our website.Mini split laser marking machine is very popular in European market.So we will introduce the popular mini split fiber laser marking and engraving machine in this article.

1.Firstly,Laser source
90% of our clients choose Raycus laser source,it is the best brand in China with its good quality and service.

2.Secondly,Machine model
Mini split model is the our most popular model.It can save more shipping cost and space.Here is the machine photo.We have 20w,30w and 50w can be chose.Pls kindly contact us for more machine details.

 

 

 

 

 

 

 

 

3.Thridly,About the tariff
The machine HS code is 845611.You can check the import tax with it.We also have CE certificate,pls kindly check it in attachment.

4.Fourthly,About the warranty
We offer three years for whole machine(it has no quick-wear parts).If any parts broken during in the period(not human factors), you only need to send us the part, we will repair it for you for free and bear the return shipping cost.

5.About the after-sales
This machine is easy to operate, we will install the software before shipping,so you can use it directly.If you use your own laptop, we will send you the software,then you can install it with yourself.We have after-sales department,all of them can speak English directly.So if you have any questions about the machine, you can talk with them directly.And we will create an online group for you after you receiving the machine, they will teach you to use the machine.

6.About the delivery time
It will take about 7-10 working days to after receiving the deposit.

Any other questions,pls feel free to contact us.Wish for your kindly reply.

Ariel Liu

My whatspp&Wechat is 0086 17866940010.

Mini machine de gravure laser fibre Léonie

Mini machine de gravure laser fibre, modèle ouvert et portable.

C’est un modèle populaire dans le marché européen et dans les pays comme les Etats-Unis, la Russie etc. La machine n’occupe que peu d’espace. Il est facile à l’opérer. Et nous vous présentons des configurations de ce modèle de machine de gravure laser.

In this passage, I will introduce firstly the main configurations of the machine, then the capacity of engraving, finnaly the adavantages of the machine.

Les configurations principales

  1. Source laser : Raycus de la Chine, IPG de l’Allemagne, JPT de la Chine
  2. Tête de galvo : Sino, une marque de Pékin
  3. Lentille de F-theta : Wavelength de Singapour
  4. Zone de travail : 100*100mm-300*300mm à choisir
  5. Puissannce : 20w, 30w, 50w, 100w à choisir
  6. Ordinateur portable
  7. 2D table de travail pour adjuster la direction
  8. Lumière rouge pour vous aider à trouver la focale
  9. Lampe et d’autres accessoires
  10. Taille de la machine : 550*1050*670mm

Capacité de gravure

Les effets de gravure basent sur les matières. Il y a des statistiques à vous aider.

Firstly, 20w : marquer sur la surface de matière

Secondly, 30w : marquer sur la surface de matière, graver avec un peu d’épaisseur

Thirdly, 50w : graver et découper 1mm argent et 1.2mm l’or, mais la vitesse est lente.

Forthly, 100w : graver et découper 1mm argent et 1.2mm l’or plus vite avec une mieux efficacité.

Avantages de la machine

Firstly, économie d’énergie : pour une heure de travail, une machine laser ne coûte que 0.5kw/h.

Secondly, il est facile à utiliser la machine. Nous vous installons le logiciel dans l’ordinateur, et les techinicians vous expliquerons comment l’utiliser. Tous cela vous aidera à l’opérer parfaitement.

Thirdly, la machine a une longue durée de la vie. Et il n’y a pas de pièces d’usure. Donc il est difficile de tomber en panne.

Forthly, il n’occupe que de peu d’espace.

Lastly, Les effets permanents. La gravure laser ne disparaîtra jamais.

 

Above all.

Et si vous avez des demandes spéciales, nous vous donnerons plus de détails.

Si vous vous intéressez à notre machine, n’hésitez pas de me contacter et nous pouvons trouver des solutions pour vous.

If you are interested in the machine, please contact me!

Léonie Liu

WhatsApp / Tel. : +8615064016816

Email : xintian160@xtlaser.com

 

 

 

The application of fiber laser marking machine Martin

The application of fiber laser marking machine Martin

The application of fiber laser marking machine Martin

This is Martin from XT laser. Glad to talk about the application of fiber laser marking machine.

Above our introduction, we introduce our company type of laser marking machine.

Review:

First, we have a fiber laser marking machine;

Second, we have a CO2 laser marking machine;

Third, we have a MOPA laser marking machine…

Now, we only introduce the application of our fiber laser marking machine.

Totally, a fiber laser machine could mark all metal and alloy. And some hard plastic.

Fiber laser marking machines could mark on all metal, such as carbon still, Brass, Copper, Stainless Steel, Gold, Silver, Aluminum, etc.

Most clients purchase our laser marking machine for cutting and engraving the gold and silver.

Usually, a 50W laser marking machine could meet almost clients. It can cut 1.2mm gold and 1mm silver. If you want to mark on ring or bangle. You need to purchase a fixing plate and rotary.

Choose Mini machine model can save a place for customers’ workshops and also can save shipping costs.

Rotary 50mm diameter for marking rings. If you just need marking rings you can choose this size.

Rotary 65mm diameter for marking rings and bracelets. If your products including rings and bracelet, we advise you choose this

 

Also, fiber laser marking machines could mark on hard plastic. Such as ABS, PVC, etc. But for hard plastic, if you want to mark before purchasing, we suggest you send some samples to us to test. Because there are many different hard plastics. Some hard plastics could mark. But there are some hard plastics cannot mark using a fiber laser marking machine. We need some samples to test for sure.

 

The application of fiber laser marking machine Martin

If you are interested in us. Please feel free to contact us:

Contact person: Martin Song

Email: xintia125@xtlaser.com

Website: www.xtlaser.com

WhatsApp/ WeChat: +86 186 1267 4468

solutions of jewelry laser engraving and cutting machine-Ivy

solutions of jewelry laser engraving and cutting machine

Hi friend,in this article,we would like to share with you solutions of jewelry laser engraving and cutting machine.

Thanks for your attention to XTLASER for jewelry engraving cutting machine on Alibaba,this is ivy responsible for US and Canada market,worked in XTLASER more than 3 years,served more than 300 customers in jewelry industry.

Most of then chose 50w fiber laser marking machine,here is hot selling model:

Cutting samples:

And as for customer common questions,please kindly check one by one as follow:

First. I am looking for the portable fiber laser unit.
That it is,portable model gain more popular in US and EU countries,suitable for DHL/Fedex Door to Door shipping.

Second. The 50 watt or do you have a little higher wattage for the small units.
That portable model can match with laser power update to 100w,also we still have 60w.

Also. I need to cut at least .90 to 1mm silver/gold etc.
Yes,it can do all metal marking and deep engraving,and soft metal cutting,such as silver,gold,brass within 1mm will be better. Working area most of them chose 100*100mm,is it suitable for you?

Then. If this machine works well then we will be buying a much larger machine, probably several machines.
Cool,and also 40% of our orders are old customers back for new machine or introduce new customers to us 🙂

Besides. I see the cost is around $3500.
We have different power and different configuration of the machine,cheapest model 50w at $2800 only,but please note that DHL door to door shipping need $850 now also tariffs in US about 27.5%,so when you got machine in hand,cheapest model need $4700. Is it clear?

And. Can you maker it for USA power(or I get a power converter).
Machine come with 110V Voltage directly and US Plug,so you can use it directly.

Finally. I would like to do the purchase through Alibaba for the insurance, I have had very good luck with Alibaba.
Perfect,in this way,will protect the buyer’s rights,that is no problem.

Any interests,please contact us at whatsapp 0086 17864184107 or email to xintian108@xtlaser.com

Thanks

Solutions of jewelry laser engraving and cutting machine in US-Ivy

Solutions of jewelry laser engraving and cutting machine in US.

This is ivy from XTLASER,responsible for US and Canada market,have worked in laser industry 4 years and served more than 300 customers for different requirements of laser equipment,includes laser cutting,engraving,cleaning also welding machine.

Thanks for your attention to us of laser engraving machine,please kindly check as follow:

1.Laser power:

Now in the market,mainly have 20w/30w/50w/60w/100w:

  • 20w suitable for surface marking;
  • 30w suitable for some engraving works;
  • 50w and 60w gain more popular in jewelry cutting and guns engraving industry;
  • 100w engraving speed is better than 50w,60w,however,because of its cost,so very few customer chose this model.

Based on your requirements,we recommend you 50w/60w.

2.Laser source:

Perhaps you have heard some brand Raycus and JPT,both of them are good,but we highly recommend you 60w JPT model. According to customers’ feedback,60w JPT M7 cutting engraving speed is better than 50w Raycus. Why 60w JPT M7 speed is faster?

  • Frequency range and single pulse energy is higher,the cutting energy and precision is better.
  • Pulse width changing scope is wider,the cutting edge and cutting effect is better.
  • Single pulse energy determines the speed much.

And also JPT JPT can mark color on stainless steel.
3.Model Details:

Most customers in North America and EU countries would like to chose Mini portable model,suitable for DHL/Fedex door to door shipping.

Mini Fiber Laser Marking Machine
Model Number XTL-FP50/60
Marking Scope 110*110mm (Optional)
Gross power <0.8KW
Marking speed 7000mm/s
Laser power 50W/60W
Power supply 110V/50Hz ~60Hz
Machine size 79*72*84cm
Gross weight 96kg

4.Machine working video:

5.Samples:


6.Total purchasing cost of the machine:

*Machine cost:
50w Raycus start from $2800-$52000;
60w JPT with High configuration with Laptop with 3 years warranty at $7200;

*Shipping cost:
DHL/Fedex Door to door shipping about $850,shipping time 5-7 working days.

*Tariffs:
Machine HS code:845611,you can use this code check in your local place. In US,will be 27.5%.

Also machine voltage is 110v,so you can use it directly. For more details,can we chat on whatsapp? My number is: 0086 17864184107

Thanks for your time

Jewelry Customer purchasing cases-Fiber laser Marking machine-Ivy

Jewelry Customer purchasing cases-Fiber laser Marking machine

Recently,one professional customers from South Africa asking some questions of Laser marking machine,he involved in jewelry industry,let us see what he wanted to know.

Please kindly check the following answers one by one:

First,This machine is it portable.

Yes,it is portable model,please kindly check as follow:

Standard model High configuration model
* Laser source: Raycus laser source/IPG/JPT
* Lens: 110*110mm lens, China brand(Optional)
* Control card: JCZ control card original, without ex-axis function.
* Software: EZCAD software
* Manual lifting pillar
* Galvo head: China brand
*Computer:NO
*LED LAMP:NO
* Working table:NO
* Spare parts:Foot switch,limit bar 2pcs.
*1.5  years  warranty for whole machine.
* Laser source: Raycus laser source/IPG/JPT
* Lens: 110*110mm lens, wavelength brand from Singapore (Optional)
* Control card: JCZ control card original, with ex-axis function.
* Software: EZCAD software
* Manual lifting pillar
* Galvo head: SINO brand galvo head SG2206, the most hot selling one in market.
*Computer: Industrial computer or Lenovo brand laptop win10 64 bits
*LED LAMP
* Working table: 2D working table, for focus distance adjust by forward-backward/left-right moving.
* Spare parts:Foot switch 2pcs, extra red pointer 1pc, goggle 1 pair, ruler 1pc; wrench 1set, backup button 1pc, dimmer 1pc, limit bar 2pcs.
*3  years  warranty for whole machine.
Second.It can cut small items out like rings and bracelets.
Yes,we have many customers involved in jewelry industry,please kindly check the attachment.
Also.It can cut gold and silver and stainless steel.
Same with last question,but Fiber laser marking machine mainly for software metal cutting,such as silver,gold,brass within 1mm,but it can do marking and engraving on stainless steel well.
Then.Can this machine cut any other materials also.
What do you mean ‘cut’? do you need cut it through or just do deep engraving? Fiber laser mainly for metal works and some hard plastic engraving,like ABS.
Beside.Can this machine do engraving means it can do writing also on steels
Yes,that is easy.
And,Will this machine be pack in total and no assembly.
Yes,correct.
And.What will the customs fee be
Based on our experience,that will be 15% plus VAT,you can check it again using the HS code:845611.
8.How big will box be
Package size will be 92*94*86cm, gross weight:90kgs.
9.What is the delivery cost
Depends on shipping methods:
If shipping by sea,about $300,but you need to pick up machine there,and shipping time need around 30 days;
Which kind of methods do you prefer? when do you want to receive the machine? thanks.
10.What is the price of the machine
It depends on the configuration,please kindly check the attachment,50w start from $2800-$5200. May i know your target budget of this project?
11.Can you please send video’s
12.Is it came with a computer
Yes,high configuration model come with laptop,if you want air or TNT shipping,will without battery,that is regular in international air shipping.
13.Do it came with a roateter
As for for rotary,here sharing with you some comparison of different size (cost is same with each one,+$300),we recommend you second model for jewelry business:

Pics Model Application
50mm Suitable for ring inside and outside marking
65mm Suitable for ring and bracelet marking
80mm Suitable for Round projects marking,max can hold 3kgs

Metal laser marking Machine engraving and cutting jewelry-Wendy

Metal laser marking Machine engraving and cutting jewelry

Following are brass cutting samples made by metal fiber laser marking machine

 

Now i would like to introduce you our newest model of laser engraving machine in 2018.

It equips with newest laser technology and advanced screen. It will extend the using life of laser machine.  And it will become easier to control.

Following is the cutting video of brass cutting by fiber laser marking machine.

Excellent beam quality

The optical fiber laser uses the medium mixed yb double-clad fiber with resonant cavity length.

So the beam quality is very good. And M2 value is 1.1. The output flare diameter can achieve 10 microns.

Excellent beam quality can ensure that optical fiber laser marking machine can get in a variety of material satisfying marking effects.

Meanwhile it is widely applied in most metal marking industries (such as brass, titanium, steel, iron, aluminum and so on)

and non metal materials like cloth, fabric, PVC, MDF, leather, acrylic, plastic and etc.

Laser long service life

Optical fiber laser marking machine use 1064 nm laser diode. So its average working hours can up to 100000 hours.

Small and exquisite Volume , applicable in the bad environment

Optical fiber surface area/volume ratio is high. And it is also good cooling effect. Meanwhile it does not need huge water cooling system and just simple air cooling.

So it can be running in bad conditions, such as high impact, high vibration, high temperature, dirt under the conditions of the normal operation.

Free maintenance operation

Optical fiber laser does not need for any maintenance (not including adjust or clean lens)

By the way, we are looking for partners and distributors of laser marking, cutting, welding and cleaning in global.

More details will be updated soon. Your bookmark will be the biggest encourage for me.

My email: xintian112@xtlaser.com  whatsup: 0086 131 7667 1529