Mopa Fiber laser marking machine, JPT M7 new series-Jill
Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.
1.Firstly,JPT laser source
You can do research in China market.
The most popular color marking laser source is Mopa JPT brand.
For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.
M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.
For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.
3.And also,Deep engraving series(higher power)
M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.
4.And then,Pulse width adjust
There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.
So it is good for color marking.
5.And also,we listParameteres for M7
20w and 30w:2-350ns;0.8mj;1-4000khz
60w and 100w and 120w:2-500ns;1.5mj;1-4000khz
6.And also,M1 and M6 parameters FYI.
M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.
7.Last but not least,Mopa and Q-Switch (Raycus,IPG)
Same:1064nm wavelength laser beam
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)
Mopa can do all the Raycus’ work.
Mopa > Raycus
8.Most of customers from jewelry and firearms guns industry choose 60w M7.
Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.
And then,we list some Color marking videos:
And also,For firearms marking engraving,you can check below article:
And also,For jewelry marking engraving cutting,you can check below article:
More questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839