Choose the suitable power and size of the fiber laser engraver–Wendy

/in , /by

Fiber laser engraver have very wide application on metal and some non-metal material engraving. Metal material like stainless steel, mild steel, brass, aluminum. Non-metal material like ABS, PVC, Rubber and many color coated product.

fiber laser marking machine

When we want to buy fiber laser engraver, some suppliers recommend their machine to us directly. Even they don’t know our detail application and request. To be honest, really this is not a good supplier. They just want to sold their machine, not think about problems in our side.

In this case, how to select one suitable fiber laser engraver for ourselves?

Working size

Fiber laser engraver have three common working size, including 110*110mm ; 200*200mm; 300*300mm.

Additional there is some non-common working size like 50*50mm;70*70mm; 150*150mm; 175*175mm; 250*250mm.

Different working size have different focus length, it means large working size have longer focus length. The laser power strength will be weak heavily during transfer. so not all laser power could use all working size.

20w laser power, working size should less than 200*200mm, 110*110mm is the most common.

30w laser power, all working size are ok.

50w laser power, all working size are ok.

Engraving request

We have many different marking request for metal material, marking, deep engraving and gold&silver cutting.

20w laser power: marking

30w laser power: marking, deep engraving and gold&silver cutting

50w laser power; deep engraving and gold&silver cutting

50w fiber laser engraver is not common as its cost is much more higher than 20w and 30w. Usually we use it gold and silver cutting.

Also when we need do deep engraving or cutting, only 110*110mm working size or less is available.

Laser source

Laser source is heart of fiber laser marking machine. So we need pay more attention on laser power.

In China market, Germany IPG and China Raycus laser source is reliable and stable. As for other small brand, we don’t recommend you use it.

Examples

Jimmy have a gun shop in TX, he need to buy one fiber laser marking machine for gun marking. which machine is best?

Usually guns marking need do depth on the surface, so he can only use 110*110mm working size or less and 30w/50w laser power.

 

How to choose the suitable power and size of the fiber laser engraver,hope read all can help you know better.

When you choose the machine to use,you can better know how to do.

If you want to learn more details about fiber laser engraver, pls contact me directly.

Wendy Liang

Email: xintian158@xtlaser.com

Whatsapp: 008619862161599

Web: www.xtlaser.com

Why should we need auxiliary gas when we using fiber laser cutting machine ? –Oriole

/in , , /by

Why should we need auxiliary gas when we using fiber laser cutting machine ?

More and more manufacturers choose to use a fiber laser cutting. Cause it is non-contact and less consumption. Why should we need auxiliary gas when we using fiber laser cutting machine cutting metals?

Fiber laser cutting machine.

                      Fiber laser cutting machine.

Above all, reasons.

First,chemical reaction.

The gas will start chemical reaction with the metal material. It will increase the working capacity.

Second, clean.

The gas can blow off the slag by air and clean the cutting seam.

Third, avoid shape change of the material.

The gas will cool the area around cutting seam. It can avoid shape change of the material.

Last but most important, protect the lens.

To protect the focus lens. Avoid combustion products hurting lens.

Besides functions.

Normally, O2 ( Oxygen) , N (Nitrogen) and Compressed Air will be used.

Their functions are as following.

First, N: Nitrogen is used for cutting nonferrrous metal. Such as Stainless Steel and Aluminum sheet. The gas can cool and protect the material. As such materials are easy to be blackened with Oxygen.So use Nitrogen can avoid this phenomenon of going black. It can be used to cut

aluminum alloy, stainless steel, galvanized steel sheet, brass.

Second, O2: Oxygen is used in cutting Carbon Steel and stainless steel. As there is many Carbonaceous impurities in carbon steel. So use O2 can greatly increase the combusting speed. Which as well, accelerating cutting speed. However, there is a disadvantage, the cutting surface will be black.

Third, Compressed Air: It can be provided by Air Compressor, the price is very low. Although there is about 20% Oxygen in air. The cutting efficiency is far less than Oxygen.It nearly same as Nitrogen’s efficiency.The cutting surface appears yellow. It can be used to cut aluminum, aluminum alloy, stainless steel, galvanized steel sheet, nonmetal, etc.

If you have any questions about fiber laser cutting. Please contact us with no hesitation.

Oriole

Whatsapp:13731273956

The reason that we need auxiliary gas when we using fiber laser cutting machine–Wendy

/in , , /by

Why should we need auxiliary gas when we using fiber laser cutting machine cutting metal materials ?

Common causes and solutions for burrs produced by laser cutting machines

The reason that we need auxiliary gas when we using fiber laser cutting machine

1.First, the auxiliary gas will start chemical reaction with the metal material, which increases the working capacity.

2.Second, blowing off the slag by air and clean the cutting seam.

3.Third, the gas will cool the area around cutting seam, which can avoid shape change of the material.

4.Last but most important, to protect the Focus Lens from combustion products caused by high temperature of laser beam.

Normally, O2 ( Oxygen) , N (Nitrogen) and Air will be used as auxiliary gas for fiber laser cutting.

Their functions are as following respectively.

N: Nitrogen used for cutting nonferrrous metal.

Such as Stainless Steel and Aluminum sheet.

It can cool and protect the material.

As such materials are easy to blackene with Oxygen, so  using Nitrogen can avoid this phenomenon of going black.

Applicable Materials: Aluminum, Aluminum Alloy, Stainless Steel, Galvanized Steel Sheet and Brass

O2: Oxygen is used in cutting Carbon Steel.

As there is many Carbonaceous impurities in carbon steel, so using O2 can greatly increase the combusting speed.

As well as accelerating cutting speed.

However, there is a disadvantage, the cutting surface will be black.

The cutting surface appears black or buff.

Applicable Materials: Stainless steel, Carbon Steel.

Air: Air can be provided by Air Compressor and the price is very low. Although there is about 20% Oxygen in air, the cutting efficiency is far less than Oxygen, nearly same as Nitrogen’s efficiency.

The cutting surface appears yellow.

Applicable Materials: Aluminum, Aluminum Alloy, Stainless Steel, Galvanized Steel Sheet and nonmetal etc.

Argon: Very expensive, protecting from oxidation and nitridation. Cutting surface appears yellow.

Mainly used in Titanium and Titanium Alloy.

 

Contact:Wendy

Email: xintian158@xtlaser.com

Whatsapp: 0086 19862161599

Web: www.xtlaser.com

Introduction of Fiber Laser Cleaning Machine-Eliza

/1 Comment/in , /by

Introduction of Fiber Laser Cleaning Machine-Eliza

Now fiber laser cleaning machine gain more and more popular, here is some introduction of it for your reference, please kindly check Introduction of Fiber Laser Cleaning Machine as follow:

Firstly, Machine power:

Now mainly have 100w/200w/300w/500w/1000w in the market, because of the machine cost, 80% customers would like to chose 200w (As 100w is not much powerful).

Here are 100w pics (Air cooling):

 

200w pics (Air cooling or water cooling):

 

300w and 500w pics (Water cooling):

Application of fiber laser cleaning machine:

Laser cleaning is widely used in various industries, such as shipping, auto parts, rubber mould, high-end machine tool, tire mould, rail, environmental protection and other industries.

Operation video:

Also XT Laser laser cleaning machine is easy to install, control, and implement automation.

And with simple operation, switching power supply, open the device, then it can be achieved cleaning without chemical reagent, medium and water washing.

It has many advantages of the focus adjustment manually, joint surface cleaning, higher cleaning surface cleanliness.

And it also can remove the surface of resin, grease, stains, dirt, rust, coating, coating, paint on objectives.

Any more questions, contact us freely
Email: lasermachine01@xtlaser.com

Whatsapp: 008613173025103

Comparison of Different Type Cutting Machine-Eliza

/in , , , /by
Comparison of Different type Cutting machine-Eliza

As you know, now in the market, mainly have Fiber laser, water Jet, Plasma for metal cutting, here attached comparison of Different type Cutting machine FYI (CNC router mainly for non-metal working, so please skip it).

Fiber laser cutting machine:

Advantages:

First,high precision, fast speed, narrow cutting seam, minimum heat affected zone, smooth cutting surface without burrs.          Second,the laser cutting head will not touch the surface of the material and will not scratch the workpiece.                                      And then,the processing flexibility is good, and any graphics can be processed,such as DXF,PLT.

Disadvantages:

As we mentioned before,purchasing cost is relatively high.

Water Jet cutting machine:

Advantages:

First,the water jet belongs to cold cutting, it does not produce thermal effect, deformation, slagging, ablation, and does not change the physical and chemical properties of the material.
Second,wide cutting range, strong versatility, almost all materials can be cut. Suitable for thick material cutting.

Disadvantages:

First,cutting carbon steel plate is easy to rust, which affects the appearance of the product.
Second,high maintenance cost;
Third,serious environmental pollution;
Then,the running cost is high, requiring a lot of water and sand;

Plasma cutting machine:

Advantages:

First,suitable for thick plate cutting.
Second,purchasing cost is lower.

Disadvantages:

Firstly,cutting thickness is roughness;
Secondly,during cutting,it will generate huge heat,material is easy to deform;
And cutting slit is big,about 3mm
Then plasma power consumption is quite powerful
Besides,the spare parts maintenance cost is high
Also,during cutting,it will produce the poisonous gas,and plasma arc is harmful to eyes,and sparks flying off in all direction,easy to hurt skin.

FIRSTLY:

Email: lasermachine01@xtlaser.com

Whatsapp: 008613173025103

Popular mini split fiber laser marking and engraving machine-Ariel

/in , , /by

Popular mini split fiber laser marking and engraving machine

Hi,dear friend,This is Ariel again from XTLASER,responsbile for European market.Thanks for your attention to our fiber laser marking machine on our website.Mini split laser marking machine is very popular in European market.So we will introduce the popular mini split fiber laser marking and engraving machine in this article.

1.Firstly,Laser source
90% of our clients choose Raycus laser source,it is the best brand in China with its good quality and service.

2.Secondly,Machine model
Mini split model is the our most popular model.It can save more shipping cost and space.Here is the machine photo.We have 20w,30w and 50w can be chose.Pls kindly contact us for more machine details.

 

 

 

 

 

 

 

 

3.Thridly,About the tariff
The machine HS code is 845611.You can check the import tax with it.We also have CE certificate,pls kindly check it in attachment.

4.Fourthly,About the warranty
We offer three years for whole machine(it has no quick-wear parts).If any parts broken during in the period(not human factors), you only need to send us the part, we will repair it for you for free and bear the return shipping cost.

5.About the after-sales
This machine is easy to operate, we will install the software before shipping,so you can use it directly.If you use your own laptop, we will send you the software,then you can install it with yourself.We have after-sales department,all of them can speak English directly.So if you have any questions about the machine, you can talk with them directly.And we will create an online group for you after you receiving the machine, they will teach you to use the machine.

6.About the delivery time
It will take about 7-10 working days to after receiving the deposit.

Any other questions,pls feel free to contact us.Wish for your kindly reply.

Ariel Liu

My whatspp&Wechat is 0086 17866940010.

Tube cutting machine how to choose–Wendy

/in , , /by

The laser machine of cutting tube 

For cutting tube,there are two types laser machine in the market.

1.Tube and plate cutting machine, which can not only cut plate and also tube.

laser

3m length or 6m length

① In such machine, rotary size including 160mm and 200mm

If 160mm diameter rotary, it can hold maximum no more than 160mm round tube , and maximum 109m*109mm square tube

If 200mm diameter rotary, it can hold maximum no more than 215mm round tube，minimum 12mm , and minmum 20*20mm, maximum 150mm*150mm square tube

② If client choose automatic clamping, then front rotary is electric clamping (speed of clamping can be adjusted), back rotary is pneumatic clamping(speed of clamping can be adjusted)

③ About weight

No matter it is 3m or 6m, maximum weight is no more than 150kg

④ front rotary is electric clamping , back rotary is pneumatic clamping

220mm rest tube, minimum length  after cutting

2.Tube cutting machine, 6m length

① In such machine, rotary size including 230mm and 300mm

230mm diameter rotary, it can hold maximum no more than 230mm round tube , and maximum 160mm*160mm square tube

300mm diameter rotary, it can hold maximum no more than 320mm round tube , and maximum 240mm*240mm square tube

② All of rotaries are pneumatic clamping (speed of clamping can be adjusted)

③ About weight

No matter it is 6m, maximum weight is no more than 300kg

About the choice of the laser tube  machine,if you want to cut plate and tube both,you can choose the plate-tube machine.

If you want to cut tube only,and the professional laser cutting tube machine is suitable.

Hope this article can help you know more to choose machine.

 

If you are interested in this article and want to know more details,feel free to contact me.

Wendy from XTLASER

Email:xintian158@xtlaser.com

Whatsapp:0086 19862161599

Skype:xtlaser1203

Website:www.xtlaser.com

Mini machine de gravure laser fibre Léonie

/in , , , /by

Mini machine de gravure laser fibre, modèle ouvert et portable.

C’est un modèle populaire dans le marché européen et dans les pays comme les Etats-Unis, la Russie etc. La machine n’occupe que peu d’espace. Il est facile à l’opérer. Et nous vous présentons des configurations de ce modèle de machine de gravure laser.

In this passage, I will introduce firstly the main configurations of the machine, then the capacity of engraving, finnaly the adavantages of the machine.

Les configurations principales

  1. Source laser : Raycus de la Chine, IPG de l’Allemagne, JPT de la Chine
  2. Tête de galvo : Sino, une marque de Pékin
  3. Lentille de F-theta : Wavelength de Singapour
  4. Zone de travail : 100*100mm-300*300mm à choisir
  5. Puissannce : 20w, 30w, 50w, 100w à choisir
  6. Ordinateur portable
  7. 2D table de travail pour adjuster la direction
  8. Lumière rouge pour vous aider à trouver la focale
  9. Lampe et d’autres accessoires
  10. Taille de la machine : 550*1050*670mm

Capacité de gravure

Les effets de gravure basent sur les matières. Il y a des statistiques à vous aider.

Firstly, 20w : marquer sur la surface de matière

Secondly, 30w : marquer sur la surface de matière, graver avec un peu d’épaisseur

Thirdly, 50w : graver et découper 1mm argent et 1.2mm l’or, mais la vitesse est lente.

Forthly, 100w : graver et découper 1mm argent et 1.2mm l’or plus vite avec une mieux efficacité.

Avantages de la machine

Firstly, économie d’énergie : pour une heure de travail, une machine laser ne coûte que 0.5kw/h.

Secondly, il est facile à utiliser la machine. Nous vous installons le logiciel dans l’ordinateur, et les techinicians vous expliquerons comment l’utiliser. Tous cela vous aidera à l’opérer parfaitement.

Thirdly, la machine a une longue durée de la vie. Et il n’y a pas de pièces d’usure. Donc il est difficile de tomber en panne.

Forthly, il n’occupe que de peu d’espace.

Lastly, Les effets permanents. La gravure laser ne disparaîtra jamais.

 

Above all.

Et si vous avez des demandes spéciales, nous vous donnerons plus de détails.

Si vous vous intéressez à notre machine, n’hésitez pas de me contacter et nous pouvons trouver des solutions pour vous.

If you are interested in the machine, please contact me!

Léonie Liu

WhatsApp / Tel. : +8615064016816

Email : xintian160@xtlaser.com

 

 

 

How to maintain the cutting machine?–Oriole

/in , , , , /by

How to maintain the cutting machine?

Here are some details about the maintenance of  the cutting machine after using it.

  • Above all,clean.

Firstly,we need to clean the attached dust and cut slag on the surface of the equipment.

A fiber laser cutting machine.

A fiber  laser cutting.

Secondly,clean up the water in the A/C storage tank.

Thirdly,cleaning waste scraps and debris in waste trailers.

More over,clean the dust on the A/C dust cover net and the water cooler dust cover net.

Fifthly,clean the water tank of the water cooler.

Last but not least,clean the surface of the cutting head and focus on cleaning the cooling water pipe joint, auxiliary gas joint, protective lens window, QBH/QCS joint and other parts.

  • What’s more,check.

Firstly,check the joints of the capacitor signal module (at the cutting head) to confirm that the fastening is intact and there is no looseness.

Secondly,equipment homing(including X, Y and Z axes).

More over,check the lubricating oil level in the lubricating oil pump. If it is not enough, fill it in time.

Fourthly,check the lubrication condition of each shaft slide rail, rack, gear and z-axis screw; and manually add lubricating oil on the upper end surface and the two end surfaces of the guide rail, and the main mechanical linkage end face of the rack, gear and lead screw is evenly distributed. Apply lithium grease. (If there is rust, be sure to remove the rust first.)

Fifthly,check the water pipes of the cooling water pipe to confirm that there is no extrusion, bending, grinding, scratching and water leakage; check the water pipe joints (push-in connectors and ordinary threaded joints) to confirm that the connection is normal and there is no water leakage.

Sixthly,check if the cooling water pressure gauge value is normal.

What’s more,replace the water cooler to circulate cooling water.

At last,check the wiring harness and cable everywhere, and confirm that there are no extrusion, bending, grinding, and scratching. There is no open welding or short circuit or hidden trouble in the welding of the break point and the plug joint.

 

That is some of the maintenance of  the cutting machine after using it .

 

Mob/Whatsapp:+8613731273956

WeChat:xtlaseroriole

Email:xintian161@xtlaser.com

Skype:xintian161@xtlaser.com

web:www.xtlaser.com

Mini enclosed fiber laser marker in European market-Ariel

/in , /by

Mini enclosed fiber laser marker in European market

This article is about mini enclosed fiber laser marker in European market.We have many clients in Europe,hope it will help you.

We have many type fiber laser marking machine.Such as mini split marking machine,mini enclosed marking machine,big enclosed laser marking machine, desktop laser marking machine and handheld fiber laser marking machine.But in European market,full enclosed model will be more popular.Full enclosed type is a little big so most of our European clients like to choose.

1.About the machine size

We also have big enclosed model can be chose. But it has a large size so you will pay more the shipping cost. But the size of mini enclosed type is 500*830*883mm, it is suitable for DHL door to door delivery or by air.

2.About the machine parts

Firstly, laser source.

For fiber laser marker, we use Raycus or IPG brand , all the famous brand.The common laser power is 20w,30w,50w. You can choose the suitable laser power according the detailed demands.

Secondly, galvo head

We use Sino brand galvo head, the best brand in China.

Thirdly, F-theta lens.

We use wavelength F-theta lens, a famous and best brand in Singapore.

Fourthly, control board

We use the BJJCZ original control board-EZCAD. Nowadays, there are many pirated software in the market. Pls confirm the original one.Original control board support win7, 8,10 and 64 bit.But copay version can only support win 7 and 32 bit.

Fifthly, laptop

We use Lenovo brand laptop, or you can choose the HP laptop. We all use win 10 system. Or you can use your own laptop.

sixthly, electric lift column.

Our mini model and desktop model all use manual lift column, but we use the electric lift column in the mini enclosed type.So you can control it in the software.

3.About the machine advantages

Firstly, High safety level, class 4;

Secondly, easy to operate;

Thirdly, fashion look

If you are interested in our this model,pls feel free to contact me to get more machine details.

Ariel from XT LASER
E: xintian122@xtlaser.com
WhatsApp&Wechat&Mobile: +86 17866940010
Skype: Ariel XTLaser