Posts

Advantage and service life of laser marker machine-Dora

Advantage and service life of laser marker machine

Laser marker machine is used more and more widely. Today introduce the advantage of laser marker machine for you. Also many customers must be interested in the service life. So today also introduce the service life briefly.

 

I.LASER MARKER MACHINE ADVANTAGE 

First, Ultra-low power consumption. It will take about one kilowatt-hour in two hours;

Second, The service life is 100,000 hours. No consumables and maintenance-free;

Third, Very small floor area, generally less than 1 square meter;

Fourth, The operation is very simple;

Fifth, The marking effect of fiber laser marking machine is permanent without falling off;

Sixth, Beautiful and generous marking effect.

 

II. SERVICE LIFE

The service life of fiber laser marker machine is 100,000 hours. If machine continues working for 24 hours a day, it will take 11 years. According to customer feedback, most fiber laser marker machines have been used for 5 years. And they are currently running well.

 

III. HOW TO INCREASE THE SERVICE LIFE

Developing good operating habits and regular inspection and maintenance of the machine will help.

First,  Cut off the power supply of the marking machine and the computer when the machine is not working.

Second, Cover the lens cover to prevent dust from polluting the lens when the machine is not working.

Third, Don’t inspect and maintain when machine is working. At the same time, don’t let non-professional person inspect and maintain.

Fourth, Any failure of this machine should immediately cut off the power supply.

Fifth, The dust will be adsorbed on the focusing lens after long using. So it will reduce the power of the laser and affect the marking effect. More serious it may cause the optical lens to absorb heat and overheat and burst. As a result, when the marking effect is not good, check carefully whether the surface of the focusing lens is contaminated.

 

At last, one more video as belowed is shared to you to know XTLASER MARKER MACHINE well.

https://youtu.be/T55OvHQtM6Y

Hope there information will be helpful to you .

By the way, any questions, please feel free to contact us.

My email is xintian118@xtlaser.com

My phone is +86 130 7536 8010(Whatsapp/Wechat)

Enclosed Jewelry fiber laser marking machine -Jill

Enclosed Jewelry fiber laser marking machine  from XT LASER

Enclosed Jewelry laser marking machine – Main components:

1.Firstly, Fiber laser source: IPG/Raycus/JPT laser source

2. Secondly,F-theta lens: Singapore wavelength brand ,110mm engraving and cutting area.

3. Thirdly,Galvo head: Sino brand galvo head,SG2206, good quality.

4. Fourthly,Computer: Lenovo laptop,Win10

5. And also,Control software: EZcad 2.14.10 original control software for machine

6. And also,Manual Pillar:500mm electric z-axis pillar

7. And also,Protect glass: With CE  FDA certification

8. And,Extra red light: To help you find best focus position. Free of charge.

9. And,Rotary device: Optional, for round object like rings and bracelet

10. And,2D work tableoptional and other standard parts standard

Jewelry laser marking machine – sample

30w can cut up to 0.7mm brass, gold, silver. But better cut within 0.5mm, will be higher speed.

50W can cut up to 1.2mm brass , gold, silver. But better cut within 1mm, will be higher speed.

Most customer also choose the fixture device and dust collector. Work together with the rotary device and machine.

Here are some Enclosed Jewelry laser marking machine cut sample. Just for your reference.

Enclosed Jewelry laser marking machineMore questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Guns engraving 50w 60w laser marking machine-Jill

Guns engraving 50w 60w laser marking machine

Guns engraving 50w laser marking machine.

Are You looking for Firearms Laser Engraving

Are You looking for Firearms Laser Engraving

Firstly,if you are looking for firearms trace ability, branding with a permanent logo or text to identify a part?

Maybe you are finding the creating custom designs on your firearms, knives or tactical weapons.

If so laser engraving has become the standard method of engraving,many customers prove it.

Additionally,laser Engraving can be to a large variety of firearms parts. Including: handgun slides, frames, polymer accessories, magazines, clips and more.

Basically, if you can create the graphic digitally, our Laser Engraving Software is capable of creating an image-ready file. It is ready to laser engrave on your material. For those laser engraving their slide, customizing their rifle, adding a texture to their handgun frame, or doing other types of custom work, XTLASER has an engraving solution for you.

Are You looking for Firearms Laser Engraving

In USA,Pakistan,Holland,Mexico,etc,many government also buy our machine to do public engraving on the firearms.

If you’re considering adding laser engraving to your current firearms or tactical weapon business, XTLASER will answer all of your questions.Suppliers Showcase for a laser engraving demonstration and to see a large variety of custom engraved samples. Watch our video below for a small sampling of what our Laser Engraving Systems can do!

So finally,if you need more details,contact us:

Email:xintian143@xtlaser.com

Whatsapp:+8613046033839

Contact:Jill

keyboard laser marking machine-Jill

keyboard laser marking machine

We have many customers buy laser engraving machine to mark on keyboard.But many customers  still do not  how to choose suitable keyboard laser engraving machine.We would share more info in this article.

1.First,as for the machine model

In the laser marking machinemarket,there is mini portable,mini-enclosed,desktop model.Euraopean customers would like to choose mini-enclosed model.Indian customers would liek to choose desktop model.Besides,mini portable is the best seller.With small size,it can save room and shipping cost.

2.Secondly,as for the laser type

We suggest the fiber laser,which is socially used in the keyboard industry.

As for fiber,there are two kinds:fiber Raycus and fiber mopa

3.How to choose?fiber is better ?or mopa?

In order to give best suggestion,when u buy the machine,u need to tell us the keyboard info

1)Waht is the keyboard brand? 2)laptop or desktop?  3)Black,white or silver color?  4)backlight or not?

Especially for keyboard marking,there are many kinds of materials.Different material,different marking result.

4.Raycus for backlight Max keyboard

If ur keyboard is only backlight model,such as Mac Air A1466,etc.30w or 50w Raycus is okay.50w with 300*300mm lens is the best choice.If budget is not enough,30w is also okay,but as for 30w with 300*300mm lens ,the marking speed would be a little slow.

Here share u the videos

Raycus for Mac:https://youtu.be/qDnPcI2GS1w

5.Mopa for others

Besides that,mopa is the best choice for u.Especially when u want to mark white color on black color.If u want to use Raycus,the marking effect may be a little with gray or yellow color,instead of white.Acccording to our experience ,30wmopa can achieve a good outcome.

If use Raycus,here is the video:https://youtu.be/CFHyT23f4-4

U can see,the effect is not good with yellow color

If use mopa,here is the video:https://youtu.be/4OQBVnPMqKA

6.Difference between Raycus and mopa

In order to let you know more about the mopa and Raycus laser,here share you the difference:
MOPA laser and Raycus or IPG laser are both 1064nm wavelength laser beam.
1)MOPA laser source is Pulse width (2ns-250ns)  and Pulse frequency (1-1000HZ) , so MOPA laser is more flexible.
2)Raycus laser is Normal Q-Switched laser source,  Pulse width and pulse frequency are fixed, can not be changed.
Pulse width 90-130 ns,repetition frequency 30-100 kHz.

When marking on the plastics,such as pvc and keyboard,the mopa effect is more delicate and can not make the black plastic become yellow and gray.
That’s why we suggest you mopa marking machine.

More questions ask us freely

Jill from XT LASER

WhatsApp:+86 130 4603 3839
Skype:lasermachine01
email:xintian143@xtlaser.com

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.

 

1.Firstly,JPT laser source

You  can do research in China market.

The most popular color marking laser source is Mopa JPT brand.

 

2.Secondly,Color series

For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.

M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.

For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.

 

3.And also,Deep engraving series(higher power)

M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.

 

4.And then,Pulse width adjust

There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.

So it is good for color marking.

 

5.And also,we listParameteres for M7

20w and 30w:2-350ns;0.8mj;1-4000khz

60w and 100w and 120w:2-500ns;1.5mj;1-4000khz

80w:2-500ns;2mj;1-4000khz

 

6.And also,M1 and M6 parameters FYI.

M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.

 

7.Last but not least,Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Difference:
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus’ work.
Mopa  > Raycus

 

8.Most of customers from jewelry and firearms guns industry choose 60w M7.

Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.

And then,we list some Color marking videos:

https://youtu.be/seidndP5_nc

https://youtu.be/ii44NOPo5bI

And also,For firearms marking engraving,you can check below article:

 

And also,For jewelry marking engraving cutting,you can check below article:

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Mopa fiber laser marker, stainless steel color laser marking machine-jill

Mopa fiber laser marker, stainless steel color laser marking machine-jill

Mopa fiber laser marker is more and more popular in the laser marker market now.

Today we would like to share more about mopa working information.

 

1.Mopa fiber laser marker

Firstly,we should konw: Fiber laser marker has usual q-switch type and mopa type.

Both can mark on almost all metal.

Mopa can do all the work of Raycus.

 

Mopa mainly has 3 advantage.

1)Firstly,mark color on stainless steel.

2)Secondly,Mark black color on anodized aluminum

3)Thidly,Mark on plastic with a better effect

 

2.Secondly,Mopa laser source

You can do research in China market.
The most popular color marking laser source is Mopa JPT.

 

3.Color series

For color marking series,JPT has M1+ and M6+,20w and 30w.

 

4.Difference between M1+ and M6+ 

The main difference is in adjustable pulse width.
M1+: 6-200ns
M6+: 2-200ns

Single pulse energy is 0.5mj and frequency is 1-2000KHz.

You can see,M6+ has wider range.
So it has wider color range and the color effect can be brighter.
If customer has strict color demand,u can suggest M6+.

5.Watt

Generally speaking,for color marking,
we always suggest 20w M1+ to customer.
But color marking speed is slow.
If you need faster speed ,or want a little deep engraving too,u can choose 30w.

 

6.Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Difference:
Mopa———Pulse width (2-200ns), Pulse frequency (1-2000HZ) , so MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed. 
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus‘ work.
Mopa  > Raycus

 

7.Mopa fiber laser marker working videos FYI.

 

1)Color marking on stainless

https://youtu.be/TJvl87XaYvM

https://youtu.be/9hNX1Mplrzk

https://youtu.be/Dw-77DsA7f8

 

2)Mark black color on anodized aluminum

https://youtu.be/GyeRbqx2B2Y

 

3)Mark on plastic

https://youtu.be/8NyMrVw4TXA

https://youtu.be/JS8xMT27w-c
Hope this can help u learn more about Mopa laser source.

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

How to choose a fiber laser marking machine–Anne

How to choose a fiber laser marking machine

When we buy a machine, we should know what it is at first. We may learn about the marking machine from the following aspects: components, working principles, characteristics, advantages, main indicators and models.

1. Fiber laser source

the element producing laser by the gain medium of glass fiber blended with rare earth element.

therefore, it is the core of a fiber laser marking machine. It has a wide application, such as laser fiber communication, laser space long-distance communication, industrial shipbuilding industry, automotive making etc. There are many domestic brands Raycus, Maxlaser, JPT, FEIBO. The overseas brands include: Coherent, IPG, and SPI.

2. Galvanometer:

galvanometer also can call current meter, as it is totally designed by the way to design the ampere meter, the different is: the needle of ampere meter is replaced by lens; The main application in laser marking, laser engraving etc., currently, the galvanometer applied in fiber laser marking machine is digital type of 10mm facula.

3. Field lens

The other name as field focus lamp, scanning lens, F-θ lens, which is mainly application  for focusing beams produced by galvanometer on a plane.

Warm tips: you should check the marking scope when purchasing the marking machine according to your needs.

It is not necessary to buy a large one or expensive one, you need to buy the most suitable one for you

4. Marking card

The other name is laser control card, laser marking card.so

The application for converting the texts and graphs in computer to analog signal or digital signal and then transmitting it into galvanometer.

5. Red light indicator:

The other name is red light pen, as the 1064nm beam is invisible, while the 650nm beam is visible, the 1064nm beam and 650nm beam are coincided by a beam combiner, 1064nm beam follows the direction of 650nm beam indicating to realize the function indicating the light path. The red light pen is in the red light combiner rack.

Hope this information is helpful for you.If you have any confused of machine,please contact to us.

Sales Manager:Anne Zhang  Mob.whatsapp:+8615098735595  Skype:amyzhang1321 Email:xintian121@xtlaser.com

How to adjust the marking depth of the laser marking machine-Anne

How to adjust the marking depth of the laser marking machine

The laser marking machine uses laser beams to mark the surfaces of various substances permanently. Compared with inkjet marking, the advantages of laser marking are as follows: a wide range of applications, a variety of materials (metal, glass, ceramics, plastics, leather, etc.) can be permanently marked with high quality. No action on the surface of the workpiece, no mechanical deformation, no corrosion on the surface of the material.

Here is a brief introduction to the method of marking depth adjustment:

1. The most direct adjustment method: increase the power of the laser marking machine.so 

2. Modify the marking speed: other parameters remain unchanged, the marking speed is slowed down, the marking depth will be deepened.so

3. Transforming the field mirror: Turning the field mirror into a small range of field mirrors, after the transformation, the depth of the marking will also become deeper.so

4. Field mirror replacement: the replacement of the field lens can also deepen the depth of laser lettering.so

5. The laser mode is better, and the marking depth is also improved.so

6. Replace the laser: replace the laser with a higher power, directly increase the depth of the laser code printer lettering.

7. Replace parts: replace better laser marking accessories, such as semiconductor laser marking machine, the use of imported Q switch, its marking depth will be better.

Hope this information is helpful for you.If you have any questions of machine,please feel free contact us.

Sales Manager:Anne Zhang   Mob.whatsapp:+8615098735595   Skype:amyzhang1321  Email:xintian121@xtlaser.com

 

6 Reasons Why Choose Laser Marking Machine-Anne

6 Reasons Why Choose Laser Marking Machine

At present, with the high development of laser technology, the laser technology is widely used in the modern industrial field.-Laser marking machine

Today XT laser will show you about laser marking machine,compared with the conventional inks and other marking methods,laser marking machine work do not need any consumables and auxiliary equipment,and work process no affects for human body healthy and also with environmental friendly system.

laser marking machine

Smart Fiber Laser Marking Machine

Now,looking the following 6 reasons about why choose fiber laser marking machine to do you mark business and improve work efficiency.

1 Laser marking method that use a high-energy-density laser to irradiate the work piece to vaporize the surface material or cause a chemical color change, thereby leaving a permanent mark.

Therefore, the entire process does not need to consume consumables, it will effectively reduce the use of raw materials.

2 The marks made by laser marking machine is clear and textured,

so it do not need secondary processing, it can effectively reduce unnecessary related processes.

3 Laser marker with high speed, high efficiency,

so compared to the traditional cumbersome processing methods, laser marker can improve the production efficiency

4 The laser mark process use the computer software control system, it operate flexible and convenient, no artificial error,

so it can effectively reduce the non-performing rate of the mark business.

5 Laser marker does not product any toxic and harmful substances through the work processing,

so it will not cause harm to the environment and the human body.

6 The laser marker with wide application,it can work on not only metal but non metal,

if you need,just a rotary part,you can mark on cylinder products.

Hope it is helpful for you for you,and if you have any questions,please feel free contact us.

Sales Manager:Anne Zhang

Mob.whatsapp:+8615098735595

Skype:amyzhang1321

The factors impact fiber laser marking machine marking efficiency-Anne

The factors impact fiber laser marking machine marking efficiency

Laser marking is a kind of technique of making permanent mark on the surface of objects by using laser beam with high density.

The purpose of using fiber laser marking machine is to bring higher production efficiency.

So it is important to know the factors that impact machine marking speed.

laser  marking machine

Here are some impact factors.

First, marking density.

In the case of same format, same spot, same depth, the higher the marking density, the slower the marking speed. so The reason is that the density directly increases the marking area.

Second, marking format.

The large-scale marking speed is slower than the small-scale marking speed because its galvanometer deflection area is increased.

Third, Marking Depth.

For deeper marking, It is necessary to adjust the parameters of fiber laser marking machine, increase the power and current, therefore, the marking speed will be affected in these processes.

Fourth, Laser spot size.

The smaller the spot, the smaller the corresponding marking volume, therefore, the larger the spot, the faster the marking.

Hope this information is helpful for you.

If you have any questions of machine,welcome to contact to XT LASER.

Sales Manager:Anne Zhang

Mob.whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com