Laser marking &Laser engraving.-Amber

Laser marking &Laser engraving

The terms “Laser Marking” and “Laser Engraving” are frequently use interchangeably but there is a difference. Generally speaking, Laser Marking refers to placing legible information onto the surface of a part with little or no penetration whereas Laser Engraving refers to placing information into a part with obvious penetration below the surface.  The same laser can accomplish either technique simply by changing settings within the laser marking software.

Laser engraving, is the practice of using lasers to engrave an object. Laser marking, on the other hand, is a broader category of methods to leave marks on an object.including color change due to chemical/molecular alteration, charring, foaming, melting, ablation.The technique does not involve the use of inks, nor does it involve tool bits which contact the engraving surface and wear out, giving it an advantage over alternative engraving or marking technologies where inks or bit heads have to  replace regularly.

The impact of laser marking has been more pronounc for specially design “laserable” materials and also for some paints. These include laser-sensitive polymers and novel metal alloys.

The term laser marking is also used as a generic term covering a broad spectrum of surfacing techniques including printing, hot-branding and laser bonding. The machines for laser engraving and laser marking are the same, so that the two terms are sometimes confus by those without knowledge or experience in the practice.

Application of UV laser marking machine-Teresa

Application of UV laser marking machine

Glass is made of the fusion of silica and other chemicals.  (the main raw materials are soda ash, limestone, and quartz). And the silicate non-metallic material that gradually increases in viscosity and hardens to crystallize during cooling. As a synthetic material, it exudes a serene and pure taste, showing the beauty of form and reality, the beauty of light and shadow, the beauty of imagery, the beauty of time and space and the beauty of fun. The glass is beautiful, but it is not enough.

Therefore, designers use various tools to paint on the glass to add color to the glass products. UV laser marking machine surpasses the traditional processing, making up for various deficiencies in the past, such as low processing accuracy, difficult drawing, damaged workpieces, and environmental pollution. With its unique processing advantages, it has become a new favorite in the processing of glass products. The industry includes essential processing tools.

UV laser marking machine belongs to the series of laser marking machines, but it is developed using a 355nm ultraviolet laser . The machine uses third-order intra-cavity frequency doubling technology to compare with infrared laser . The 355 ultraviolet light spot is extremely small. And it can be to a large extent reduce the mechanical deformation of the material and the processing heat effect is small. Because it is mainly use for ultra-fine marking and engraving. Especially suitable for marking food, medical packaging materials, micro-holes, high-speed division of glass materials and silicon Application areas such as complex wafer cutting of wafers.

Advantage of UV laser marking machine:

First, UV laser marking machine is equipped with imported violet laser , which has excellent performance, uniform laser power density, fine light spot, and stable output optical power;

Secondly, the modular design of the UV laser marking machine is flexible in application. And it equipped with automatic/manual working mode;

Thirdly, UV laser marking machine has a wide range of applicable materials to make up for the lack of infrared laser processing capabilities, and can achieve ultra-fine laser marking;

Fourthly, UV laser marking machine has a small heat-affected zone. It can help to avoid damage by processed materials and a high yield rate;

Fifthly, UV laser marking machine does not need consumables. And the use cost and maintenance cost are low.

In the application of glass marking, UV laser marking machine has more advantage compared with CO2 laser marking machine. It’s marking effective is better. Its narking speed is faster. Its marking precision is more higher.

Different national languages, font styles, patterns, and laser marking techniques are handy. Due to the combination of laser marking technology and CNC system, after drawing on the computer, the ultraviolet laser marking machine can mark the words or patterns you want to say on the product, showing the casual romance.

For more information, please feel free to contact us.


Whatsapp: +8615006829603

Skype: xtlaser Teresa

3D fiber laser metal engraving machine-Wendy

3D fiber laser marking machine have become very popular in last few years. Also its price is lower and lower, more and more people have enough power to buy it. Recent years, with the development of laser technology, 3D laser engraving machine will become more and more common in the market.

3D laser engraving machine kind

Now there is 2 main kinds 3D laser engraving machine in the market. One is 3D large format laser marking machine, another one is 3D curved laser marking machine.

Large format laser marking

3D large format main used on CO2 laser marking machine, few people use it on fiber laser marking machine. Co2 large format laser marking also have very wide application. such as clothing, leather, wood product, LGP board, paper etc. 

On jean processing fields, most company do it with water processing. This way have heavy pollution for environment, special on water. Now more and more people replace it with co2 laser format laser marking machine. Laser machine have no any pollution and no any consumable except electric power. At the same time, its working speed is very fast.

Curved laser marking machine

Curved laser marking main use fiber laser source. Previous we can use 2D laser engraving machine mark cylinder with the rotary device. But when we need mark ball surface, 2D laser with rotary device can’t finish it. 3D laser engraving machine is good solution for all curved surface, such as ball, cylinder, ladder etc.

Emboss 3D laser marking machine

Now many people do metal mold with laser engraver. Although we can use 2D laser machine finish deep engraving, the problem is all depth is same, still it is same level marking. When we do deep engraving with layering and thirddimension, 3d laser will be good solution.

In last several years, 3D laser engraving machine is very expensive, so its market is not very well. Now its price is declining as more and more company can do it. If you want to learn more about it, you can contact us.

Wendy Ning


Cell&whatsapp: 0086 13176671529

Skype: XT Wendy Ning

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.


1.Firstly,JPT laser source

You  can do research in China market.

The most popular color marking laser source is Mopa JPT brand.


2.Secondly,Color series

For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.

M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.

For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.


3.And also,Deep engraving series(higher power)

M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.


4.And then,Pulse width adjust

There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.

So it is good for color marking.


5.And also,we listParameteres for M7

20w and 30w:2-350ns;0.8mj;1-4000khz

60w and 100w and 120w:2-500ns;1.5mj;1-4000khz



6.And also,M1 and M6 parameters FYI.

M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.


7.Last but not least,Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus’ work.
Mopa  > Raycus


8.Most of customers from jewelry and firearms guns industry choose 60w M7.

Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.

And then,we list some Color marking videos:

And also,For firearms marking engraving,you can check below article:


And also,For jewelry marking engraving cutting,you can check below article:


More questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Benefits of using laser marking machine for jewelry-lisa wang

6 Benefits Of Using Laser Marking Machine For Jewelry

laser marking machine

Over the past decade, laser marking machines have revolutionized the jewelry industry. We see a constant increase in jewelry businesses that utilizing laser technology to offer bespoke and customized items for their customers. This article explores the benefits of laser technology and shows you some of the main advantages compared to traditional engraving methods.


what is MOPA laser

Foremost, a single laser system can engrave multiple surfaces. That means that you only need to buy one laser marking machine to be able to engrave silver, gold, copper, titanium, brass and tons more applications. In fact, a fiber laser machine can also engrave non-metal surfaces, such as acrylic, plastic and wood.

The other benefit for jewelers is the application for individualizing and personalizeing different shaped items. So, whether you’re looking to engrave rings, bracelets, necklaces or watches; it can all be done with the same machine! The only restriction is the size of your machine’s marking area. Although that is typically not a concern, as jewelry items tend to be small in size.


You can create virtually any design, no matter how complex, and have it successfully engraved onto your jewelry item. Even the smallest of designs remains legible when marked with a laser beam.

Thanks to its versatility, Jewelry designers use the laser machine for countless applications. Whether it’s engraving a photo onto a pendant; adding a unique pattern to a ring; branding jewelry with a logo for corporate events; or personalizing a necklace with a heart-warming message – the possibilities are endless.


The fiber laser machine uses a non-contact marking method. Essentially, a laser beam is directed onto the item’s surface and produces a mark by removing the material. As a result, there is no contact between the laser equipment and the jewelry item.

Since there is no contact during the engraving process. The jewelry is never compromised with engraved by fiber laser machine. Additionally, the machine doesn’t have moving parts, which can wear down over time and require replacement.

If more details of laser marking machine, please let us know by below contact,

Mob; 008615954124625

fiber laser marking machine applicated on the surgical tools engraving-lisa

fiber laser marking machine applicated on the surgical tools engraving

Laser marking machine, Because there are thousands of equipment, devices, and tools in hospitals and medical facilities which make it possible for staff and doctors to go about their jobs every day. Identifying each one of them and putting them to their purposed use is very important and that is why they have to be marked.

Marking safeguards the safety of patients, keeps members of staff accountable, makes it easy for the maintenance team to service medical equipment, helps the procurement department to procure the right equipment and at the right time, and keeps the details of the manufacturer.On the whole, Marking Machine saves everyone’s time and keeps medical facilities and hospitals running smoothly.

Laser Marking

Evenhere are various ways of marking equipment, but it is superior. Laser marking is the use of laser beams to label equipment, tools, devices, parts and materials. Unlike stickers and such, it is durable. It never wears out. It weathers abrasive chemicals, moisture, heat and other harsh conditions known to ruin the other kinds of labelling

Why Laser Marking is Important

In 2013, Food and Drugs Association (FDA) made laser marking of medical equipment mandatory. Because all the medical equipment needs to be identified and traced. The FDA requires that the marks are clear and the text can be readable by the machine and human beings

Unique Device Identification

The FDA requires that all medical equipment bear a Unique Device Identification (UDI). This assigned “unique identifier” carries with it the name of the manufacturer. The make or model of the product, expiry date – if applicable and unique attributes if any.

The government issues guidelines on marking equipment with unique identifiers, and these marks nearly suits the usage in some small tools in the medical field, so it is compulsory.

How to Laser Mark

Laser  marking can mark not only on plastic or metals selected and specified  but also on materials like foil and laminate . Contrary to other forms of labelling, it does not involve any contact. Because the material or surface determines the type of laser mark .

More information if you want to know fiber laser marking machinne, please contact us as below,


Email: lasermachine02 @

Laser marking technology for electronic components-lisa

Laser marking technology for electronic components

With the fast development of the electronic technology. The speed of upgrading of the electronic products are becoming quicker and quicker.

Therefore, the electronic manufacturing enterprises need to provide more cost-benefit products to the market at a faster speed. A complete set of data traceability system must establish for the product from storing, manufacturing, inspecting to delivering, so as to realize the internal control of the product quality. In order to realize the product traceability, have to make character or bar code identifications on the product.  Thus endowing the product with the unique “ID Card”.


At present, most electronic products, such as the main board of the mobile phone, computer and other key elements have identifications of traceable information.

At the present stage, It’s adopted the ink label paper to stick on the product. However, such a mean has many problems, big amount of consumables, high pollution, high labor cost, the marks are easy to eliminate and so on. Aimed at such condition, replacing the label paper by the laser marking code has become a tendency of the industry. With the automatic PCB laser marking machine, matrix code, can mark  two-dimension barcode and character, pattern and other information can on the printing circuit board and the relevant components.


The laser marking machine integrates the high-performance CO2/Fiber light source and high-pixel CCD camera.

Combined with the micron-level mobile module, the automatic positioning before coding as well as the automatic code interpreting. And assessing after coding will get realized. Through special software, this device can realize connecting with the customer information system. The marked information can generate with the software system automatically and can received through the internet. It can coordinated with the online operation of the SMT production line. Furthermore, it can also cooperate with the automatic up and down trigger to constitute the off-line operation station.

Buying an laser marking machine for electronic components processing, you can choose 20w fiber laser marking machine, 20w economic fiber laser marking machine…

Any more information of our laser marking machine, please contact us freely.

Mob/whatsapp: 008615954124625

Laser marking machine for engraving engine from Lisa

Laser marking machine for engraving engine

laser marking machine

Smart Fiber Laser Marking Machine

What is Laser Marking of the Engine?

It has become an essential part of the manufacturing and automotive industry as it assists businesses to keep check of their products, minimize simulating, develop quality and more. There are good numbers of benefits for marking in industries for helping understand the perspective behind this technology. The laser technology is one of the most amazing applications to involve with. The major problem found was information regarding engine build for investigation in case any failures occurred. The idea was to install a 2D code onto the engine casing, conversely, this would need multiple marking techniques to mount at the plant.

The Marking Process is Clean and Eco-Friendly:

Chemical Engraving or Inkjet like processes use inks and chemicals in marking that have a negative effect on the surroundings apart from being costly consumables for the industries. The Laser Marking, on the other hand, is way far from using any kind of consumables that makes it reasonable, clean and energy competent. It also excludes downtime and costs related to fixing, cleaning or fueling printers. The products might also get damaged over time due to peel off, tearing or any other reason. But laser marking helps the permanent marking to remain really long, supporting the brand and quality in the industry.

Laser marking promises clean processing at least adulteration since the process cannot contacted. Where printing techniques will lead to burning down of the material by marking, the damage-free process includes no or least material dissemination.

The Marking Procedure:

  • Laser marking is the result of when beam comes into contact with the material surface, slightly modifying its features or presentation.
  • Obtained by moving a low-mechanical beam gradually across the material using a technique called staining, that produces high-contrast marks without troubling the material.
  • Laser raises the material temperature that causes oxidation below the surface and turning the material black.
  • The laser marking applies low temperatures to metal to toughen the surface.
  • All of this is done while leaving the surface undamaged.

Laser marking is unique from laser etching and laser engraving in a number of ways:

  • It is a rare process and not all places provide these services.
  • Also known as laser dark marking or laser coloration, and also charring for plastic materials and strengthening for metals.
  • There are 4 collective types of laser marking: carbon migration, annealing, coloration, and
  • It is very common in the medical device industry for titanium parts and stainless steel but can executed on other materials too.
  • A laser marker is perfect for barcodes, QR codes, UID codes, logos and other recognition needs.

Which industries use Laser Marking?

When investing the laser, it was one of the best creations and gained early recognition for its usefulness in different industries. But the laser marking has given modern reach to the flourishing companies by promoting their brand name and assurance for quality.

  • Automotive
  • Aerospace
  • Electronics
  • Industrial & Tooling
  • Medical
  • Military & Defense
  • Oil & Gas and more…

For the automotive industry and motorized industries, companies extensively make use of laser marking on the engines. It is the recognition for their appreciation of every automotive manufacturing entity. Every industry uses the laser for different purposes. For instance, the manufacturing companies understand the importance of product branding and therefore. They mostly make use of laser marking on their products and gain recognition in the industry. Not only for the laser marking but also for laser engraving and etching, business widely apply these techniques.

If any information you want to know more about our machine, please contact as below



Contact person: Lisa Wang


The Top 4 Benefits of UV Laser Marking-lisa

The Top 4 Benefits of UV Laser Marking

fiber laser marking machine tutorial (2)

Manufacturers are increasingly requiring identification marks on their products to help with traceability. While the traditional marking method is typically ink printing. It’s out of date already, especially in the medical industry as ink that often easily removed, altered, or contaminated. That’s why many manufacturers have begun to use ultraviolet lasers to mark their products.

Laser marking makes it easy to identify parts and authenticity without a physical tool etching the surface of the part or transmitting any substances onto the surface. Instead, the laser light focused onto a material, producing damage-free, easy-to-read marks. Apple Rubber uses laser marking to add model numbers, bar codes, logos and more onto customer’s o-rings and seals.

Here are the top four benefits of utilizing UV laser marking in your manufacturing facility:

1. Flexible processing

Laser marking also used on many products in a variety of industries, including aerospace, automotive, defense DOD, medical and electronic components. Apple Rubber uses laser marking on virtually any o-ring or seal where product identification required.

In many industries, product authenticity and traceability is required by law. Automotive companies, for example, use part traceability to quickly determine when and where the part produced in the case of component failure, which helps for product recalls. Because of the importance of product identification, using a flexible and reliable marking technique is critical.

2. Overall speed

In traditional ink marking, printing equipment is often mechanically complex, requiring longer downtimes for maintenance and frequent cleanings. With UV laser marking, no prolonged downtime associated with cleaning or fixing a printer, and the overall engraving process is extremely quick and simple.

UV lasers are better absorbed than other wavelengths and marking techniques by virtually all materials, requiring less power to produce a clear mark. This makes the process even simpler since UV laser marking ensures a high-quality, high-contrast mark in one application.

3. Maximizes authenticity

UV lasers create easy-to-read marks that are far superior to printed marks or labels. Apple Rubber uses a high-quality laser that can focus in on smaller spot sizes and produce a high peak power, leading to crisp, clear marks on o-rings and seals. This ensures that parts can clearly identified and their markings cannot  altered or tampered with.

In the pharmaceutical industry, counterfeiting has become a huge issue with many social and economic implications. Since pharmaceutical manufacturers are limite in what types of markings they can use, they must choose an option that is tamper-proof, easy to read, compatible with their specific environment and cannot alter the product. Because of these requirements, laser marking is the best choice in this industry and many others that require complete authenticity in their products.

4. Minimizes contamination

While the ink in traditional marking methods is non-toxic, the printing equipment often utilizes lubricants and solvents that can become airborne and contaminate printed products. Medical manufacturing often requires completely sterile products that produced in a classified cleanroom. In this case, traditional marking would not be acceptable.

During the laser marking process, the marking device does not come into direct contact with the product, allowing for clean operation with minimal contamination. This creates a product identification option for industries that require sterile products. And ensures that outside materials will not cause future contamination of a product.

Want to talk more about laser marking?


Mob/whatsapp: 008615954124625

Contact person: Lisa Wang

The great Marking Effect by Laser Marking Machine-Wendy

The great Marking Effect by Laser Marking Machine

The great marking effect by laser marking machine.

We often use laser marking machine to print permanent codes on various products.

It is the economic system to determine the marking and coding on the parts of the manufactured components.

Laser marking technique getting more and more popularity in the present printing field.

Due to its exclusive features and we can use it in different materials. such as metal, steel, rubber, plastic, leather, wood, glass and much more with low-cost marking.

The best part about this Fiber Laser Marking Machine is that it saves the labor as well as requires minimal maintenance.

1.Get to know more details about the laser marking machine

There are different technologies of laser marking machine like Fiber, Green, Carbon dioxide (CO2), DPSS, etc.

The well-manufactured machines are popular for its performance, quality and of course zero maintenance among people.

The dependable manufacturer uses the original Engine Parts Laser Laser Marking Machine.

It mainly for manufacturing their machines to bring people the best quality.

They are well suitable for your environment as well as comfortable .

So as to automate that will surely help you to save money, energy and time.

The machine helps to print out permanent printing with Batch Lot No. and MRP.

The method provided by the machine provides benefits over the technologies.

It include marking quality, fewer consumables, and permanent printing.

Various technologies work with advanced procedures which are beneficial.

For example- The machine having CO2 marking machine in assorted outputs to point out a range of applications and substrates.

Laser markers have different touchscreen controller. Different speeds, and clarity that are engineered to cut down the coding system.

This helps in minimizing both the cost and investment.

The fiber laser marker is best for metal and plastic marking.

The best part about these machines is that they can integrate into automations.

They help in picking, printing, placing. Sticking and removing on automated linear.

These machines also consume very less power in comparison to others.

They are used for different fields with increased needs in precision, smoothness, and depth.

People can utilize fiber laser marking machine for engraving both metallic materials and the non-metallic.