Fiber laser cutting machine use and maintenance – Catherine | XTLASER

Fiber laser cutting machine use and maintenance – Catherine

Fiber laser cutting machine use and maintenance

Fiber laser cutting machine is a high-tech large-scale machine in the division of machinery. This kind of machinery is very expensive when purchase. And the professional level of the technicians is also very high during the process of use. So we are using machinery. In the process of the process must always be processed and maintained in order to extend the life of the machine. Today we will talk about fiber laser cutting machine use and maintenance.

First, let the steel strip stay tight at all times.

The steel belt plays a very important role in the transmission of the laser cutting machine. And the steel strip made of steel. If the steel not tighten during use, it will easily lead to the being cut. Then out of the track, even the steel strip may also slip, which poses a great threat to the safety of the staff. So no matter when or where, the steel belt must keep in tension. So that construction the safety of personnel plays a certain protective role.

Second, often check the angle of the tool

Because the most important part of the entire fiber laser cutting machine is the cutting machine. If the angle of the cutting machine shows a certain deviation. Then the final precision of the cut object will less accurate during the cutting process. .

Third, often sweeping the inside of the machine

Since the laser cutting machine directly vaporizes the metal surface during cutting. Then a lot of dust often generat on the surface and inside of the cutting machine. We should always suck the dust out with a vacuum cleaner to ensure zero inside the machine. The parts are spotless, so that the parts can operat normally.

Fourth, parts and components should treat frequently with lubricating oil.

We need to lubricate the racks, rails and many cutting machine parts from time to time so that they can ensure that the gears are very precise during operation. In this way, the mechanical operation will be in the normal running track, and the precision of the cut products will be higher.