XT laser take you to know about laser of the fiber laser marker-Angelina

XT laser take you to know about laser of the fiber laser marker

We have been discussing the cost of fiber laser marker: why the price gap is so large; how long about its lifetime, and so .

These problems are not only the concerns of laser equipment manufacturers, but also the problems customers want to know.

The determinants of these problems often have a lot to do with lasers.

XT laser meets your curiosity and takes you to know about the internal structure of the laser.

The structure of the laser of the fiber laser marking machine is the same as that of the fiber laser marker.

The inside is not mysterious and full of unknown unreliable dangers.

It is undeniable that it is a product of wisdom under highly civilized conditions and belongs to high-tech derivatives.

At the same time, its technical threshold is higher than that of fiber laser marking machine.

And it has higher requirements for objective conditions of employees, environment and tools.

This also increases the curiosity of the laser of the fiber laser marking machine.

And many of the practitioners of the fiber laser marking machine have never seen the internal structure of the laser, let alone the customer?

The internal structure of the laser of the fiber laser marker is as follows:

laser marking machine

1.Main parts of fiber laser marker

The module of the laser includes LED, AOS, Q-light, PCB circuit board, fan, heat-dissipation module, optical fiber, temperature feedback control measurement module, beam expansion module, transmission fiber, etc.,

There just to satisfy everyone’s curiosity.

Do not do any technical discussion.

From the module in the above figure, we can understand that even if the power of the laser is attenuated.

Or if it is damaged for some reason, some of the modules need to be replaced or repaired.

In fact, it is the same as the desktop computer we are repairing and assembling.

However, no matter how the insurance is over, there are always some maintenance costs.

So the customer needs special protection during the use, especially in the harsh environmental conditions.

It is necessary to strengthen the protection, such as sand, dust, overheating, etc.

Regular maintenance, and the fiber is easy to break,we need protect it during the movement process,

Especially the hand-held or split-type fiber laser marking machine, need to pay attention.

In the internal structure of the laser of the fiber laser marking machine, each module has its own unique functions.

We integrate then to realize the transmission of high-energy beams, and the processing of materials through optical devices such as galvanometers and lenses.

In addition, there are some differences in the structure of lasers from different manufacturers, the functions are similar.

They are also important factors that determines the price, life and stability of fiber laser marking machines.

What is laser marker machine – Teresa

What is laser marker machine

Nowadays laser marker machines are becoming more and more popular.

Users often use them in the field requiring finer and higher precision. 

Fundamental of laser marker machine

A laser marker machine uses a laser beam to mark a permanent sign on the surface of different materials. Through the evaporation of the surface material, the deep substance come out . Thus it can engrave beautiful patterns, trademarks and words.

Composition of laser marker machine

Firstly, fiber laser

The fiber laser marking machine uses an imported pulsed fiber laser. Fiber lasers have a long service life. It also has a good laser output mode. You can find it in the casing of the marker machine.

Secondly, laser scanner

The laser scanning system consists of two parts: an optical scanner and servo control. The entire system was designed and manufactured. Using new technologies, new materials, new processes and new working principles.

The optical scanner is divided into an X-direction scanning system and a Y-direction scanning system. Most importantly, a laser reflecting lens is fixed on each servo motor shaft. The scan trajectory of each servo motor is digitally controlled by a computer.

Thirdly, F-theta lens

The function of the F-theta lens is to focus the parallel laser beam at a point. Different F-theta lenses have different marking effects and marking ranges. The fiber laser marking machine adopts imported high-performance focusing system. The standard lens focal length is F = 160mm, and the effective scanning range is Φ110mm. But users can select the model lens as needed.

Fourthly, Computer control system

The computer control system is the control and command center of the entire laser marker machine. It is also the carrier of software installation. The coordinated control of the acousto-optic modulation system and the galvanometer scanning system will help complete the marking process.

Fifthly, Power supply

Laser power supply is a device that powers the fiber laser. Its input voltage is AC220V.

What’s more, it is in the marking machine control box.

Classification

Laser marking machines include:

Firstly, fiber laser marking machine.

Secondly, CO2 laser marking machine.

Thirdly, semiconductor laser marking machine

Fourthly, YAG laser marking machine

And also UV laser marking machine, Green laser marking machine.

Any question about laser marker, free to message me.
Contact person: Teresa Ren
Email address: xintian105@xtlaser.com
Whatsapp & Wechat: 008615006829603
Skype: xintian105@xtlaser.com

Why should u have a mopa laser marking machine for your work-Angelina

Why should u have a mopa laser marking machine for your work

Last week we received many customers asking for mopa laser marking machine.

And luckily i have sold 5 sets of mopa laser marking machine.

In fact , mopa laser machine is popular in the market , however seldom of  customers may pat attention to it.

So why should customer buy a mopa laser marker? how could the machine bring for u?

In this passage we will give some details introduction.

At first, mopa laser marker could achieve good color outcome on stainless steel.

Nowadays more and more customer design a beautiful pic and sell it in his shop.

In some special days such as Valentine’s Day,Christmas Day and etc.

Designing a beautiful logo and marking with our mopa machine would win popularity in the market and help owner earn more.

laser marking machine

Secondly, marking black color on anodized aluminium.

This is also a special function of mopa laser marking machine.

Some of customers need mark logo on metal materials.

The black color is most evident color among all colors .

If on other metals materials, fiber laser marking machine is enough for it.

However if the metal material is anodized material, and the customer still ask for black color.

Then mopa laser marking machine is a good choice for u.

If u want to learn more about mopa laser source, pls contact with :

contact Angelina

Email: xintian118@xtlaser.com

wechat:15965618161

mobile/whatsup:+8613335191585

skype:Angelina Xtlaser

Laser Marking Machine On Coca Cola (Customized Gift)–Anne

Laser Marking Machine On Coca Cola

As we know have many customers buy laser marking machine in laser service.Customized special content for customer.

Today,XT LASER introduce one customized gift on coca cola.

Here are a picture that the customer celebrate birthday for her boyfriend.

laser marking machine

How to stir up? The tools are simple and inexpensive, but they are very careful. First, you need to prepare your laser marking machine, then buy a bottle of Coke, then edit a sweet talk, then show the charm of laser marker technology, and finally show it on Coke, and perfect packaging, to make a small gift with high face value. Because it can be a powerful weapon when you pull your sister at any time.

The original bottle of Coke can also become so intense, if received this gift, there is a feeling of being pulled? Whether you want to get rid of singleness or add a little color to your ordinary life, you can customize such a small gift with the help of all romantic festivals. Applicable to relatives, lover, friends, mentors, birthday, acquaintance, separation and all other scenes

So one small laser marking machine can make more work.You can DIY on cola,also can marking series and name on rings.

One laser marking machine can make the life more energy .

Hope these information can help you expand your work.

If you have any questions of machine,welcome to contact us.

Sales Manager:Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

Outside red pointer to help find focus of marking machine-Jill

How to find focus of marking machine

1.What is focus? the purpose of Adjusting focus?

laser is a kind of light beam of highly concentrate energy, which can only mark on the focus point. And other position can not be marked. In this case ,it should be adjusted before marking .In order to get the best marking effect we should make the laser focus converged on the worktable.

 

2.How to find focus with outside red pointer

Here we offer you a simple and popular way of finding focus, no need to messure with ruler.It is our machine standard configuration.

Here is the outside red pointer

Machine has two red spot, one is inside, another is outside. When two red spots come into one, it means on focus.
So easy to operate, and this function is free of charge for you.

Here is video:  https://youtu.be/yor9MTmZfhU

3.How to find focus without outside red pointer

open the machine and marking software, then put metal plate on the worktable ,inputting content and select the “continuous part”. Raising and falling down the pillar to find the strongest point after press the mark button.

Which position is the focus:Raising and falling down the pillar after press the mark button. Then watch carefully. You will find a position which the laser is brightest and the sound of marking is loudest. And this position is called focus point.

 

4.find focus by rule

Also we can record the distance in order to find the position of the strongest laser marking. For e.g. : F=160/163, the filed area is 110mm*110mm, the distance between edge of Lens and surface of part is 190mm (±2mm).

 

More questions?Feel free to contact Jill

E: xintian101@xtlaser.com

T:+86 130 4603 3839

Skype: lasermachine01

What is Mopa laser marking machine?—Tony

What is Mopa laser marking machine?

What is Mopa laser marking machine?  As a sales person, for this question, I was often asked. So what is the Mopa laser on earth? I will give all the persons who read my blog a best answer.

Mopa principle

Mopa is a name of laser source type. The difference between Mopa and regular fiber laser marking machine is not too big. Because, Mopa is fiber laser in principle. But Mopa’s pulse is adjustable. But for regular fiber laser machine, the laser source’s pulse is fixed. However both of them are fiber laser, the only difference in principle is whether it adjust the pulse.

Thus, why people design a laser source that could adjust laser pulse? What is it used for?

Since people can adjust the laser pulse, then it achieves multi-color marking on metal materials.

Like the video below, We used Mopa to coloring mark stainless steel.

Mopa Functions

But as you can see, the speed of color marking is very slow.  So what other advantage make Mopa still occupy the laser marking market?

At present, the aluminium oxide is a general materials for smart phone case. The Mopa laser is very good to do it. If use the regular fiber laser source to mark aluminium oxide. It won’t mark black on it. You will see it is the grey color if you see at the front.  But if you see from two sides,  it will turn to black. And you can feel burr on the material surface. But using Mopa laser, these questions will be gone.

And  If you bought a Mopa marking machine. You just set the pulse be fixed. Then the machine will become a fiber laser marking machine. Then it will enhance the speed of marking. So the Mopa laser machine could become a regular laser marking machine. So that is why, price of Mopa will higher than fiber laser. Mopa laser machine has more functions.

In short, XT laser use the mopa laser source from JPT and Raycus in general. If you do interested in our machine.

 

You can just Email me: xintian124@xtlaser.com

https://www.xtlaser.com/product-item/mopa-laser-marking-machine/

 

Different laser marking machine for plastic marking-Angelina

Different laser marking machine for plastic marking

Laser marking machine with different laser source occupies an important role in plastic industry.

Most of customers from different industry would like to mark barcode, production date and serials number on plastic.

We all know that food industry is common in our daily life.

Also most of their package is made of plastic.

Then what kind of machine could we use to mark plastic?

In this passage we would like to give some suggestion for reference.

In most people mind, plastic belongs to non-metal materials, we could only use co2 laser marking machine to do this work.

However this mind is not totally correct!

According to our test, fiber laser marking machine is also finish fantastic work on the plastic.

plastic laser marking samples

Fiber laser marking machine could mark most of the plastics.

Another typical case is sealed plastic industry, we have many customers from this industry.

They have purchased many fiber laser marker to finish the job!

The second choice is co2 laser marking machine, most of our customers would know about it.

co2 laser marker could mark on all non metal materials.

The third choice is mopa laser marker, which could mark with smooth logo on plastic.

For example, it could mark on the switch and ID CARD,also some electric products such as keyboard.

laser marking samples

In the end, it is UV laser marking machine,which is expensive than other 3 models laser marker.

Nearly seldom customer would consider this one expect for high requirements for the marking results.

So through this passage, u could see customers have so many choice for plastic marking.

If u are one of the customers from plastic industry,welcome to consult me:

contact Angelina

Email: xintian118@xtlaser.com

wechat:15965618161

mobile/whatsup:+8613335191585

skype:Angelina Xtlaser

What is difference between Raycus laser, Q-switched laser source and MOPA laser-Ivy

What is difference between Raycus laser, Q-switched laser and MOPA laser
Some customer have confusion of Fiber and  MOPA laser, so today i write this blog to make everything clearly. Following is the difference between Raycus laser,Q-switched laser and Mopa laser.

First, MOPA laser wavelength also is 1064nm, it is belong to fiber laser, so it is just one series of fiber laser. Fiber laser has 2 types: pulse width fixed, we called it Q-switched laser source; pulse width can be adjusted, we called it MOPA laser.

Whatever Raycus laser, IPG laser even Max laser, they all have MOPA series, e.g. we can say Raycus brand MOPA series, IPG brand MOPA series. But it seems in China market when we ask Raycus/IPG laser, buyer and seller all view it as Q-switched laser source. There are 2 reasons:

1. Price matter.

IPG brand MOPA laser source is quite expensive, less people choose it. Raycus brand MOPA series also is expensive, besides Raycus mainly sell Q-switched laser source. We talked this topic before, we have to admit every company has their featured product.

2. Popularity.

IPG/Raycus/Max laser source Q-switched type are quite common in the market. While MOPA laser sell less compare with Q-switched laser source.

Wechat/whatsapp:0086 17864184107

How to Choose a Fiber Laser Marking Machine ?-Sophia

How to Choose a Fiber Laser Marking Machine ?

If your company is in the manufacturing, electronics, or even medical sectors, sooner or later, you will require laser marking for your products and components.

The best solution for  is a fiber laser marking machine.

Therefore, how to choose a fiber laser marking machine is important.

The non-contact fiber laser marking process is well-known among customers for the following reasons:

  • Durability
  • Readability
  • High-temperature resistance
  • Application to various materials
  • No need for toxic inks, solvents, or acids

But simply understanding the advantages of fiber lasers is not enough. There are other factors that you need to consider.

Factors for Choosing a Fiber Laser Marking Machine:

The following are parameters specific to the laser source that you need to keep in mind when choosing a fiber laser marking machine.

Beam Quality: 

Beam quality is an important parameter, as it affects the laser’s processing capability.

Single or Multi-mode Lasers:

There are two types of fiber lasers – single mode and multi-mode.

First, Single mode fiber lasers deliver a narrow, high intensity beam that can be focused down to a spot size as small as 20 microns and are generated within a fiber core of less than 25 microns.

Second, Multi-mode lasers (also called higher order mode), use fibers with core diameters greater than 25 microns.

Mark Resolution:

The type of fiber laser machine you choose will determine its mark resolution capabilities.

The machine should be able to achieve a sufficient mark size and quality.

Fiber laser marking machines generally consist of 1064nm lasers, which provide resolutions up to 18 microns.

Along with the important characteristics of the laser source, one must also consider the full laser marking system when coming to a decision on which fiber laser marking machine will be best suited to an application:

First,Beam Steering

Second, Galvanometer,

Then, Gantry

Last, Software.

These basic factors can help you make an informed decision when purchasing a fiber laser marking system for your company.

Sophia
Tel:+86 531 88558038
Email: xintian115@xtlaser.com
Skype/Whatsapp : +(86)17854111450

Wechat: +86 15866985420
Jinan Xintian Technology Co., Ltd.

fiber laser marking machine applicated on the surgical tools engraving-lisa

fiber laser marking machine applicated on the surgical tools engraving

Because there are thousands of equipment, devices, and tools in hospitals and medical facilities which make it possible for staff and doctors to go about their jobs every day. Identifying each one of them and putting them to their purposed use is very important and that is why they have to be marked.

Marking safeguards the safety of patients, keeps members of staff accountable, makes it easy for the maintenance team to service medical equipment, helps the procurement department to procure the right equipment and at the right time, and keeps the details of the manufacturer.On the whole, laser Marking Machine saves everyone’s time and keeps medical facilities and hospitals running smoothly.

Evenhere are various ways of marking equipment, but laser marking is superior. Laser marking is the use of laser beams to label equipment, tools, devices, parts and materials. Unlike stickers and such, laser marking is durable. It never wears out. It weathers abrasive chemicals, moisture, heat and other harsh conditions known to ruin the other kinds of labelling

Why Laser Marking is Important

In 2013, Food and Drugs Association (FDA) made laser marking of medical equipment mandatory. Because all the medical equipment needs to be identified and traced. The FDA requires that the marks are clear and the text can be readable by the machine and human beings

Unique Device Identification

The FDA requires that all medical equipment bear a Unique Device Identification (UDI). This assigned “unique identifier” carries with it the name of the manufacturer. The make or model of the product, expiry date – if applicable and unique attributes if any.

The government issues guidelines on marking equipment with unique identifiers, and these marks nearly suits the usage in some small tools in the medical field, so this machine is compulsory.

How to Laser Mark

Laser  marking can mark not only on plastic or metals selected and specified  but also on materials like foil and laminate . Contrary to other forms of labelling. It does not involve any contact. Because the material or surface determines the type of laser mark .

More information if you want to know fiber laser marking machine, please contact us as below,

Whatsapp/skype/wechat:008615954124625

Email: lasermachine02 @ xtlaser.com