Fiber laser marker used for marking ABS-lisa

Fiber laser marker used for marking ABS-lisa

ABS is a kind of BS (styrene-butadiene rubber), PB (polybutadiene),  PBA (butadiene rubber) dispers in AS (acrylonitrile-styrene copolymer) or PS (polystyrene) multi-component polymer. Due to the different ratios, different properties and melting temperatures can be obtain. If the ABS blend with other plastics or additives, it can be expanded to ABS for different uses. Such as impact grade, flame retardant grade,heat resistance,transparent grade, electroplating grade, enhanced grade, etc. Based on the characteristic of ABS material, the laser marking machine can mark on the ABS material. ABS has very good flame retardancy,which widely used in electronics, electrical appliances, and communication equipment. since

Buy the best ABS laser marker machine

The ABS laser marker absorbs laser energy and converts the laser beam into heat energy, which generates heating, evaporation carbonization and chemical reaction. For different plastics chemistry, there are different varieties of light-color laser markings on dark backgrounds and dark laser markings on light-color backgrounds, which are suitable for black, white, yellow and gray marking on materials such as nylon.because
1, UV laser marker marks plastic has better effect ,but more expensive. UV laser does not have heat, so will not burn the plastic surface , the pattern is more beautiful. It is popular to use for mobile phones LOOG,  high-end cosmetic case,mobile phone charger, FPC circuit board,  high-grade tableware, high-end watch,glass porcelain, bottle cap QR code etc. but

2, fiber laser marker machine, affordable  price is about $2600~$4000, the shortcomings have higher requirements for plastic materials. It must be pure material, can not dope with any nozzle material. It is necessary to add laser engraving powder to the plastic raw materials to achieve the idea effect.

Any more information about fiber/uv/green/mopoa laser marker machine if you need, just let us know.

Mob:008615954124625

Email:lasermachine02@xtlaser.com

Looking forward to receive message from you

 

The application of fiber laser marking machine Martin

The application of fiber laser marking machine Martin

The application of fiber laser marking machine Martin

This is Martin from XT laser. Glad to talk about the application of fiber laser marking machine.

Above our introduction, we introduce our company type of laser marking machine.

Review:

First, we have a fiber laser marking machine;

Second, we have a CO2 laser marking machine;

Third, we have a MOPA laser marking machine…

Now, we only introduce the application of our fiber laser marking machine.

Totally, a fiber laser machine could mark all metal and alloy. And some hard plastic.

Fiber laser marking machines could mark on all metal, such as carbon still, Brass, Copper, Stainless Steel, Gold, Silver, Aluminum, etc.

Most clients purchase our laser marking machine for cutting and engraving the gold and silver.

Usually, a 50W laser marking machine could meet almost clients. It can cut 1.2mm gold and 1mm silver. If you want to mark on ring or bangle. You need to purchase a fixing plate and rotary.

Choose Mini machine model can save a place for customers’ workshops and also can save shipping costs.

Rotary 50mm diameter for marking rings. If you just need marking rings you can choose this size.

Rotary 65mm diameter for marking rings and bracelets. If your products including rings and bracelet, we advise you choose this

 

Also, fiber laser marking machines could mark on hard plastic. Such as ABS, PVC, etc. But for hard plastic, if you want to mark before purchasing, we suggest you send some samples to us to test. Because there are many different hard plastics. Some hard plastics could mark. But there are some hard plastics cannot mark using a fiber laser marking machine. We need some samples to test for sure.

 

The application of fiber laser marking machine Martin

If you are interested in us. Please feel free to contact us:

Contact person: Martin Song

Email: xintia125@xtlaser.com

Website: www.xtlaser.com

WhatsApp/ WeChat: +86 186 1267 4468

The lifespan of fiber laser marking machine-Ariel

The lifespan of fiber laser marking machine

How many years does a fiber laser marking machine take?Today we will introduce the lifespan of fiber laser marking machine.

I believe many people will ask this question.

Today to give you the calculation:Laser lifetime laboratory data is 100,000 hoursIf you work 24 hours a day, that’s 11 years.

If the laser attenuation is excluded and the mark cannot be marked on the workpiece, you can use it for six years based on the laser output of 40%.

Of course, this is the theoretical data.

According to the experience of XT laser, the optical fiber laser marking machine launched by our company has been used in the user site for five years.

And it is now running well.

The following summarizes a series of optical fiber marking machine maintenance specific methods.

1) when the fiber laser marking machine does not working, the marking machine and computer power should be cut off.

2) when the machine is not working, cover the field lens well to prevent dust from contaminating the optical lens.

3) the circuit of the machine is in a high-voltage state when it is working.

Non-professionals  not allowed to repair the machine at startup to avoid electric shock accidents.

4) the power need  cut off immediately in case of any fault.

5) if the device use for a long time, it will absorb the dust on the surface under the focusing mirror.

If it is light, the power of the laser will be reduced, affecting the marking effect.

The most serious cause of the optical lens heat absorption so hot that burst.

When marking effect feel  not good, should carefully check the focus lens surface is contaminated.

Any questions,pls feel free to contact us.

Ariel Liu

Email:xintian122@xtlaser.com

Bird rings engraved with fiber laser marking machine-lisa

Bird rings engraved with fiber laser marking machine-lisa

Spring is here and to many of us that means BABY CHICKS!! There can be one problem: how do you tell which is which?

Why would you want to keep track of you baby chicks? Well, the answer varies from poultry fancier to poultry fancier but here are a few reasons.

Breeding Program

– One of the main reasons you would want to track your baby chicks is so that you know their lineage. So this would be done by using one of the methods that allows you to track the individual birds. Which means it needs to have numbers on them.

Tracking a Breed

– Sometimes a breed can be easily identified by the type of eggs or the chick marking so you want to tag them and id them right away so you can keep track of that bird.

Age/Year of the birds

– You may want to band your birds so you know how old they are. Layers are usually only laying a lot of eggs for about two years so if you have flock of mixed age birds you should band them so you know which birds belong in which age group.

If you are a bird lover and you happen to read this article, you must be a lucky man.
Yes we already found the ways to solve this problems.
In recent years, fiber laser marking machine is becoming popular on the applications of bird rings.
This is the mini type fiber laser marking machine, a compact model that can save space and shipping cost

what is MOPA laser

 

Please click these videos to learn the working

1:fiber laser for marking bird rings

2: laser marking machine for rings

3: pigeon rings with laser marking machine

From the video, you saw the rotary and fixture bar are both necessary.
1. Fixture bar, fixing many pcs of rings on one steel, and achive marking once time

 

 

 

 

 

2.Rotary device, clamping the steel bar and make it rotating for marking different sides

 

 

 

 

 

 

In summary, fiber laser marking machine widely used on the marking rings, bird rings, pigeon rings, finger rings,

Most of metal materials you can use it to mark

If more details you need, please feel free to contact us.

Lisa wang

Mob/whatsapp/wechat:0086 15954124625

Email:laserma

Fiber laser engraving machine for stainless steel-lisa

Fiber laser engraving machine for stainless steel

Stainless steel is a kind of modern general engineering material.

We use the fiber laser engraving machine in various industries. From the daily consumer products to the kitchen wares. From manufacturing the surgical operation device to the roof, stainless steel is always the best choice. There are over 150 types of stainless steels which purchased from the market. Their surface smoothness is also in great varieties. When the fiber laser engraving technology is working on various stainless steel materials,. there will be amazing effect. Many products or components made of stainless steel require marks of certain forms.

Fiber laser engraving machine

No matter these marks are the manufacturing date or the simple alphanumeric code indicating the component number. Or even the more complicated bar code or data bar code, fiber laser engraving machine can make marks without exception. The fiber laser engraving machine can mark the typefaces in single lines, in hollow or solid. Some marks are rather complex, such as the functional marks like the scales on the tools or instruments. Furthermore, the fiber laser engraving machine can still engrave more complicated decorative patterns.

The fiber laser engraving machine is small in size.

But it can generate the nanosecond-level monopulse, with the light concentration of 10~40W. To enable the stainless steel surface to have visible changes under the premise that the main stainless steel material is not impacted by the heat. When using with the photoelectric scanner, the laser will be utilized effectively to carve and print different patterns. According to the characteristics of the incident light and the stainless steel type. As well as the different reaction of the stainless steel to the laser, various visible effects can be obtain.

The impulse with enough energy also can use to melt the partial surface. And then the laser will make the surface to generate a series of small pitting, which will have chemical reaction with the oxygen in the air, thus forming the touchable black marks. When the impulse increases, some materials will be evaporated. The melt in the pitting will be extruded out because of the pressure, so as to have a flashing effect and improve the visual quality significantly, thus having a carving sense.

 

If rather using low energy strength, a long reaction time will bring a total different effect.

Under the premise of not melting the metal, a surface mark of annealing spot in dark color will form. To be more accurate, it is the black oxidation spot with high contrast. With no influence to the surface roughness and structure of the material. Such marks are usually widely use in the daily consumer products. Or the medical surgical operation tools with strict requirements on marks. So as to make sure that the tools will not erode after repeated sterilization. The flexibility and the generated controllable impulse of the fiber laser engraving machine make all these surface marks to become true.
Fiber laser engraving machine can still make pure white marks on the stainless steel. In addition, through controlling the laser energy, the very short low-energy impulse can be use to generate very small fondant. So that it can print the grind before oxidation and generate solid and white marks. Because of its elegant appearance, it is usually use for the daily consumer products. Such as the camera and mobile phone. The mark of this type will generate obvious influence to the physical characteristics of the material, such as the waterproof performance of the material.
The same as the traditional printing, changing the density of the spot or the energy strength will also change the gray mark effect.
Fiber laser engraving machine has another application, which is to use the very short and biggest repetitive rate low-energy impulse in 1MHz to polish the stainless steel with the surface wiredrawing process. Such a way will melt the dimpling part of the texture surface of the wiredrawing process. The remelting generated herein will be able to polish the material effectively, thus making the material to have the effect of reflecting light.

Any info, please let us know by below contact,

Mob: 008615954124625

solutions of jewelry laser cutting machine-Ivy

solutions of jewelry laser cutting machine

Hello all,in this email,we would like to share with you solutions of jewelry laser cutting machine,as we know in US,many many jewelers looking for affordable laser cutters,we have two proposals for based on your requirements,please kindly check as follow:

50w/60w marking machine with 100*100mm lens 1000w IPG with 600*600mm working area
  • Molde:XTL-FP50/60
  • Machine outlook:open type
  • 50w Raycus laser/60w JPT laser
  • Price start from $5200-$7200

It will mark more times and then cut it through.
Working video:https://www.youtube.com/watch?v=-KtVoWW09X8&t=23s

  • Model:XTC-FM6060
  • Machine Outlook:Enclosed type
  • Fiber Laser source:1kw /1.5kw IPG Germany Brand
  • Price start from $33800-$40000

It can cut it through by one time,more faster.
Workingvideo:https://www.youtube.com/watch?v=nPcG77o12Bs

Here is comparison of two models:
Advantages Disadvantages
Fiber laser marking machine *Lower machine cost;
*Easy to learn and operation;
*Fast production time;
*Can do marking,engraving & cutting;
*No wearing parts;
*Support ring inside and outside marking;
*Cutting speed is slow;
*Max only can cut 1.2mm;
Fiber laser cutting machine *Fast cutting speed;
*Can cut up to 2.0mm jewelry plate;
*Machine cost is higher;
*Need about 4-5 weeks for production;
*Need our engineer to your factory for installation and training; (Online training during COVID-19)
*Has wearing parts on cutting head,such as protective lens and nozzle;
*The machine size is bigger;
*Not suitable for marking and engraving;

So how about the thickness you need to cut? and how about the quantity per day? My whatsappe/wechat :0086 17864184107,email: xintian108@xtlaser.com, any more questions,please feel free to contact us online.

Hopefully it is helpful to you.

Thanks

How to improve the efficiency of the laser marker-Ariel

How to improve the efficiency of the laser marker

In this passage, we will give some suggestions for improving the efficiency of the fiber laser marking machine.This article we will introduce how to improve the efficiency of the laser marker.

At first,the primary factors affecting the fiber laser marking machine is divided into internal factors and processing of the two elements of the workpiece.

The main internal elements are laser frequency, laser spot form and beam divergence Angle, laser power, reasonable optical integration.

The first internal factors in the early model selection of time attention, should follow the laser engineer’s opinion to choose.

Another factor is the primary need for customers to pay attention to the needs of processing.

The primary marking density, marking format, marking depth and laser spot size.

Secondly, it is optical fiber laser marker marking density

In the case of the same format, equal spot and the same depth, the higher the marking density is, the slower the corresponding marking speed will be.

The original density directly increases the marking area.。

Thirdly, fiber laser marking machine marking format

Because the deflection area of large format marking galvanometer increases, the marking speed of large format is slower than that of small format.

At last,Optical fiber laser marking machine marking depth

According to the requirements, if the marking depth needs deepen,we need adjust the parameters of the fiber laser engraving machine.

So as to increase the power, current and other factors of the fiber laser marking machine.

Therefore, the above factors will affect the marking speed  in these processes.

How to improve the marking speed of laser marking machine-Ariel

How to improve the marking speed of laser marking machine

How to improve the marking speed of laser marking machine?We will talk about it in this article. If you have interest in it, let’t get start.

The main reasons affecting the marking speed of optical fiber laser marking machine are divided into two aspects.

Firstly,One is the equipment itself, the other is the workpiece processing.

The main reasons of the equipment itself are laser frequency, laser spot pattern and beam divergence Angle, laser power, reasonable optical shaping and auxiliary gas in processing.

Customers should consider this point when choosing laser marking machine.

We suggest to choose the type of laser engraving machine according to the opinions of professional technical engineers.

Secondly,Another reason is marker density, marker width, marker depth and laser spot size.

Marking density: in the same width, spot and depth and the higher the marking density also the slower the marking speed.

Because the density directly increases the marking area.

Marking area: as the deflection area of large area marking galvanometer increases, the marking speed of large area is slower than that of small area

Marking depth: adjust the parameters of the fiber laser marking machine and increase the power, current and other parameters of the fiber laser marking machine to affect the marking speed.

Laser spot size: the larger the spot, the faster the marking speed.

We have many kinds fiber laser marking machine can be chose.Like mini type fiber laser marking machine,desktop fiber laser marking machine, mini enclosed type fiber laser marking machine and protable fiber laser marking machine.

And Any other questions,pls feel free to contact us.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010

How to adjust the marking depth of the laser marker-Ariel

How to adjust the marking depth of the laser marker

How to adjust the marking depth of the laser marker?

The laser marking machine uses laser beams to mark the surfaces of various substances permanently.

Comparing with inkjet marking, the advantages of laser marking are as follows.

a wide range of applications, a variety of materials (metal, glass, ceramics, plastics, leather, etc.) can  permanently mark with high quality.

No action on the surface of the workpiece, no mechanical deformation, no corrosion on the surface of the material.

Here is a brief introduction to the method of marking depth adjustment:

At first, the most direct adjustment method: increase the power of the laser marking machine.

Secondly,Modify the marking speed: other parameters remain unchanged, the marking speed is slow down, the marking depth will be deepened.

Thirdly, Transforming the field mirror: Turning the field mirror into a small range of field mirrors, after the transformation, the depth of the marking will also become deeper.

Fourthly,Field mirror replacement: the replacement of the field lens can also deepen the depth of laser lettering.

Fifthly, The laser mode is better, and we could improve the marking depth.

Sixthly,Replace the laser.

Finally, Replace the laser with a higher power, directly increase the depth of the laser code printer lettering.

In the end, Replace parts: replace better laser marking accessories, such as semiconductor laser marking machine, the use of imported Q switch, its marking depth will be better.

And if you have any questions,Contact us for more details.

Email:xintian122@xtlaser.com

whatsapp:0086 17833940010.

The Difference Between Fiber Lasers and CO2 Lasers-Ariel

The Difference Between Fiber Lasers and CO2 Lasers

The Difference Between Fiber Lasers and CO2 Lasers.This article we will talk about it.

 

Here at XT Laser, we have a wide range of lasers to accommodate any project, large or small.

And we always utilize state-of-the-art technology to ensure that your job is good.

That’s why we have both fiber and CO2 lasers in our shop.

Here’s a brief guide to understanding the difference between the two.

CO2 Lasers

CO2 lasers have been on the market longer, but that doesn’t meant that they’re an outdated piece of technology.

In fact, CO2 lasers are constantly developing in order to increase precision, efficiency, and quality of finish.

For fabricators utilizing thick sheets of metal, CO2 lasers are still the most effective and efficient approach to cutting.

CO2 lasers create cuts significantly faster when cutting sheets over 2mm thick in a straight line.

In our facility, we deal with materials as thick as 1 inch, which often call for a CO2 laser’s superior cutting time and power.

CO2 lasers also provide a better finish and cleaner edge when working with thicker materials.

Fiber Lasers

Fiber lasers channel and amplify light using fiber optic cables.

Light is then focused using a lens, which focuses this powerful beam onto the material that needs to be cut.

Fiber lasers are a newer technology, and as such have some impressive improvements over former options.

For example, using the amplification method specified above.

Fiber lasers are usually more energy efficient, using as little as a third of the energy needed for CO2 lasers.

Fiber lasers are also great for use on reflective materials like aluminum, brass, and copper .