Advantage and service life of laser marker machine-Dora

Advantage and service life of laser marker machine

Laser marker machine is used more and more widely. Today introduce the advantage of laser marker machine for you. Also many customers must be interested in the service life. So today also introduce the service life briefly.



First, Ultra-low power consumption. It will take about one kilowatt-hour in two hours;

Second, The service life is 100,000 hours. No consumables and maintenance-free;

Third, Very small floor area, generally less than 1 square meter;

Fourth, The operation is very simple;

Fifth, The marking effect of fiber laser marking machine is permanent without falling off;

Sixth, Beautiful and generous marking effect.



The service life of fiber laser marker machine is 100,000 hours. If machine continues working for 24 hours a day, it will take 11 years. According to customer feedback, most fiber laser marker machines have been used for 5 years. And they are currently running well.



Developing good operating habits and regular inspection and maintenance of the machine will help.

First,  Cut off the power supply of the marking machine and the computer when the machine is not working.

Second, Cover the lens cover to prevent dust from polluting the lens when the machine is not working.

Third, Don’t inspect and maintain when machine is working. At the same time, don’t let non-professional person inspect and maintain.

Fourth, Any failure of this machine should immediately cut off the power supply.

Fifth, The dust will be adsorbed on the focusing lens after long using. So it will reduce the power of the laser and affect the marking effect. More serious it may cause the optical lens to absorb heat and overheat and burst. As a result, when the marking effect is not good, check carefully whether the surface of the focusing lens is contaminated.


At last, one more video as belowed is shared to you to know XTLASER MARKER MACHINE well.

Hope there information will be helpful to you .

By the way, any questions, please feel free to contact us.

My email is

My phone is +86 130 7536 8010(Whatsapp/Wechat)

Features of fiber laser marking -Huda

Features of fiber laser marking

Fiber laser marking machine has many advantages compare with traditional symbol methods (pad printing, coding, electro-erosion, etc.) due to its extraordinary working principle;

First:Non-contact processing

can  print on any regular or irregular surface, and there will be no internal stress on the workpiece;

 Second:Wide range of materials

Can print on materials of different types or hardness, such as metal, plastic, ceramics, glass, paper, leather, etc.;

Third:It can integrat with other equipment on the pro:duction line ,and advance the automation degree of the production line;

Fourth: The symbol is clear, durable, beautiful, and prevent counterfeiting;

Fifth:Long service life and no pollution;

Sixth: Low working cost

The marking speed is fast and the symbol is formed at one time, the energy consumption is small, more important the work cost is low.

Seventh: High processing efficiency

The laser beam under the control of the computer ,so it can move at a high speed (speed up to 5 to 7 m/s), and the marking process can  complete with a few seconds. The printing of a standard computer keyboard can  finish in 12 seconds. The laser marking system is equipp a computer control system, which can actively cooperate with the high-speed assembly line.

Eighth:Fast development speed

Due to the connection between laser technology and accounting machine technology, users only need to program on the accounting machine to end the laser printing output, and can change the printing plan at any time, which fundamentally replaces the traditional mold making process, and shortens the product upgrade cycle and flexible production Provide convenience stuff.

Ninth: High machining accuracy

The laser can act on the surface of the material with a very thin beam, the smallest line width can reach 0.05mm. So it creates a broad application space for precision processing and increased anti-counterfeiting functions.

If you are interested in our laser welding machine. Please free feel to contact us.


WhatsApp: 0086 15264852794

The website:


Enclosed Jewelry fiber laser marking machine -Jill

Enclosed Jewelry fiber laser marking machine  from XT LASER

Enclosed Jewelry laser marking machine – Main components:

1.Firstly, Fiber laser source: IPG/Raycus/JPT laser source

2. Secondly,F-theta lens: Singapore wavelength brand ,110mm engraving and cutting area.

3. Thirdly,Galvo head: Sino brand galvo head,SG2206, good quality.

4. Fourthly,Computer: Lenovo laptop,Win10

5. And also,Control software: EZcad 2.14.10 original control software for machine

6. And also,Manual Pillar:500mm electric z-axis pillar

7. And also,Protect glass: With CE  FDA certification

8. And,Extra red light: To help you find best focus position. Free of charge.

9. And,Rotary device: Optional, for round object like rings and bracelet

10. And,2D work tableoptional and other standard parts standard

Jewelry laser marking machine – sample

30w can cut up to 0.7mm brass, gold, silver. But better cut within 0.5mm, will be higher speed.

50W can cut up to 1.2mm brass , gold, silver. But better cut within 1mm, will be higher speed.

Most customer also choose the fixture device and dust collector. Work together with the rotary device and machine.

Here are some Enclosed Jewelry laser marking machine cut sample. Just for your reference.

Enclosed Jewelry laser marking machineMore questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Guns engraving 50w 60w laser marking machine-Jill

Guns engraving 50w 60w laser marking machine

Guns engraving 50w laser marking machine.

Are You looking for Firearms Laser Engraving

Are You looking for Firearms Laser Engraving

Firstly,if you are looking for firearms trace ability, branding with a permanent logo or text to identify a part?

Maybe you are finding the creating custom designs on your firearms, knives or tactical weapons.

If so laser engraving has become the standard method of engraving,many customers prove it.

Additionally,laser Engraving can be to a large variety of firearms parts. Including: handgun slides, frames, polymer accessories, magazines, clips and more.

Basically, if you can create the graphic digitally, our Laser Engraving Software is capable of creating an image-ready file. It is ready to laser engrave on your material. For those laser engraving their slide, customizing their rifle, adding a texture to their handgun frame, or doing other types of custom work, XTLASER has an engraving solution for you.

Are You looking for Firearms Laser Engraving

In USA,Pakistan,Holland,Mexico,etc,many government also buy our machine to do public engraving on the firearms.

If you’re considering adding laser engraving to your current firearms or tactical weapon business, XTLASER will answer all of your questions.Suppliers Showcase for a laser engraving demonstration and to see a large variety of custom engraved samples. Watch our video below for a small sampling of what our Laser Engraving Systems can do!

So finally,if you need more details,contact us:



keyboard laser marking machine-Jill

keyboard laser marking machine

We have many customers buy laser engraving machine to mark on keyboard.But many customers  still do not  how to choose suitable keyboard laser engraving machine.We would share more info in this article.

1.First,as for the machine model

In the laser marking machinemarket,there is mini portable,mini-enclosed,desktop model.Euraopean customers would like to choose mini-enclosed model.Indian customers would liek to choose desktop model.Besides,mini portable is the best seller.With small size,it can save room and shipping cost.

2.Secondly,as for the laser type

We suggest the fiber laser,which is socially used in the keyboard industry.

As for fiber,there are two kinds:fiber Raycus and fiber mopa

3.How to choose?fiber is better ?or mopa?

In order to give best suggestion,when u buy the machine,u need to tell us the keyboard info

1)Waht is the keyboard brand? 2)laptop or desktop?  3)Black,white or silver color?  4)backlight or not?

Especially for keyboard marking,there are many kinds of materials.Different material,different marking result.

4.Raycus for backlight Max keyboard

If ur keyboard is only backlight model,such as Mac Air A1466,etc.30w or 50w Raycus is okay.50w with 300*300mm lens is the best choice.If budget is not enough,30w is also okay,but as for 30w with 300*300mm lens ,the marking speed would be a little slow.

Here share u the videos

Raycus for Mac:

5.Mopa for others

Besides that,mopa is the best choice for u.Especially when u want to mark white color on black color.If u want to use Raycus,the marking effect may be a little with gray or yellow color,instead of white.Acccording to our experience ,30wmopa can achieve a good outcome.

If use Raycus,here is the video:

U can see,the effect is not good with yellow color

If use mopa,here is the video:

6.Difference between Raycus and mopa

In order to let you know more about the mopa and Raycus laser,here share you the difference:
MOPA laser and Raycus or IPG laser are both 1064nm wavelength laser beam.
1)MOPA laser source is Pulse width (2ns-250ns)  and Pulse frequency (1-1000HZ) , so MOPA laser is more flexible.
2)Raycus laser is Normal Q-Switched laser source,  Pulse width and pulse frequency are fixed, can not be changed.
Pulse width 90-130 ns,repetition frequency 30-100 kHz.

When marking on the plastics,such as pvc and keyboard,the mopa effect is more delicate and can not make the black plastic become yellow and gray.
That’s why we suggest you mopa marking machine.

More questions ask us freely

Jill from XT LASER

WhatsApp:+86 130 4603 3839

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine, JPT M7 new series-Jill

Mopa Fiber laser marking machine,it is more and more popular now.Now it has M7 series.And then, let us introduce more here.


1.Firstly,JPT laser source

You  can do research in China market.

The most popular color marking laser source is Mopa JPT brand.


2.Secondly,Color series

For color marking series,before there is M1 and M6 series,now JPT stop to manufacture it.

M7 is the update of M1 and M6. However the parameters and color effect is much better than M1 and M6.

For M7,there is 20w,30w,60w,80w,100w,120w,150w,200w.


3.And also,Deep engraving series(higher power)

M7 series also replace LM1 deep engraving series.60w,80w,100w,120w,150w,200w.It is good for deep engraving and thin metal cutting.And also,it is good for color marking too.


4.And then,Pulse width adjust

There are 16 adjustable width range.Continues、2ns、4ns、6ns、 8ns、13ns、20ns、30ns、45ns、60ns、80ns、100ns、150ns、200ns、250ns、350ns.

So it is good for color marking.


5.And also,we listParameteres for M7

20w and 30w:2-350ns;0.8mj;1-4000khz

60w and 100w and 120w:2-500ns;1.5mj;1-4000khz



6.And also,M1 and M6 parameters FYI.

M1+: 6-200ns; M6+: 2-200ns
Single pulse energy is 0.5mj and frequency is 1-2000KHz.


7.Last but not least,Mopa and Q-Switch (Raycus,IPG)

Same:1064nm wavelength laser beam
Mopa———Pulse width (2-350/500ns), Pulse frequency (1-4000HZ) .So MOPA laser is more flexible.
Q-Switch—- Pulse width and pulse frequency are fixed, can not be changed.
Pulse width (110-150ns),Pulse frequency(30-100 kHz)

Mopa can do all the Raycus’ work.
Mopa  > Raycus


8.Most of customers from jewelry and firearms guns industry choose 60w M7.

Because it can mark color on stainless steel.At the same time,it can also do the deep engraving work very well.

And then,we list some Color marking videos:

And also,For firearms marking engraving,you can check below article:


And also,For jewelry marking engraving cutting,you can check below article:


More questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

China Fiber laser marker cutter welder cleaner in NA USA Canada,xt laser fiber laser machine-Jill

China Fiber laser marker cutter welder cleaner in NA USA Canada,xt laser fiber laser machine-Jill

China fiber laser machine is more and more popular in NA market.

Firstly,Fiber laser marking machineis popular in the firearms guns,jewelry,customs engraving industry.

Secondly,Fiber laser cutting/welding machine is popular in the sheet-metal,customs laser industry.

Thridly,Fiber laser cleaning machine is popular in the laser service,mould making industry.


1.Firstly,Fiber laser marking machine

There is 20w,30w,50w,100w,etc,.30w and 50w  is the best seller now.

Then,For firearm and jewelry making,50w is more and more popular.Because the laser machine is cheaper and cheaper now.












And then,we share some marking videos.

And then,gun firearms engraving:

And then,Jewelry cutting and ring marking:


2.Secondly,Fiber laser cutting machine

There is 1kw,1.5kw,2kw,3kw,4kw,6kw,etc,.

And then,Beseide the 1500x300mm model,Small format is the best serller in NA.

For small format cutter,there is 1300×900 model and 600x600mm.


1309 model(cutting area is 1300x900mm ).

Machine picture

several problems

laser cutting machinery for metal







Then,we share some videos.


6060 model(cutting area is 600x600mm ).

In jewelry cutting industry,they will choose this to cut 925 silver sheet.

Cutting speed is much faster than fiber laser marker.

Then,share the machine picture.

High precision cutting machine







Then we share some videos.–1SuRQw


3.Thirdly,Fiber laser welding machine

Handheld fiber laser welding machine will replace YAG laser welding.

Now fiber laser is more and more popular.
It can weld stainless steel,carbon steel,brass,aluminum,etc,.

Then,share the picture.








4.And also,Fiber laser cleaning machine

It mainly clean the rust,dust,oil,etc,.

Then we share some videos.


More questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Application of various laser marking machines-Leo

Application of various laser marking machines

Application of various laser marking machines: Fiber lasers have become a hot topic in laser physics research in recent years, and it has been unanimously considered as a new generation product that has the potential to completely replace solid-state lasers. With the development of laser equipment and there are more and more types of laser marking machines and the application industry is also expanding. But different laser marking machine applications are also in different fields. Kinds of applications. If you want to know more about the laser marking machine, you can consider to consult XT LASER, there will be professional to answer your questions.

CO2 laser marking machine

The applicable materials are mainly non-metal materials such as bamboo and wood products and paper and cloth leather and plexiglass and epoxy resin and acrylic and polyester resin and etc.

Fiber laser marking machine

Necessary equipment for improving efficiency, saving energy and pursuing quality.

UV laser marking machine

Industry applications: Mainly used in ultra-precision processing of high-end markets.

Fiber laser deep engraving machine

Industry applications and applicable materials: Suitable for all metal materials.The machine can mark high-resolution with very beautiful text and patterns on electroplating materials and coating materials and spray materials, plastic rubber, resin, ceramics and other materials.

3D laser marking machine

Suitable for laser marking of various metal or non-metal products with three-dimensional curved surfaces.

Fiber laser marking machine is the most advanced laser marking equipment in the world. It has the characteristics of good beam quality and small size and fast speed and long working life and flexible and convenient installation and maintenance-free.

XT LASER is manufactuere of fiber laser machines for more than 16 years.

Welcome to contact me:
Jinan Xintian Technology Co., Ltd (XT LASER)
Mob/Whatsapp: +86 18615250132            WeChat: 18615250132
Email:                    Skype: Leo Yuan

what is MOPA laser

Fiber Laser Machine for Firearms Industry-Leo

Fiber Laser Marking System – Designed for Firearms marking & engraving

Work Principle

Fiber laser, it belongs to heat treatment, machine can mark signs on product by burn its surface.


The laser engraving machine can be used for engraving on gun stock, gun barrel, gun magazine, gun magazine holder, gun cylinder, gun muzzle of rifles, semiautomatics, shotguns, handguns and other weapons.

Product Features

Advantages of The Best Laser Engraving Machine for Guns, Firearms, Weapons as follow:

Chamber, compact and safe.

High speed scanning galvo head.

Marking size: 100*100mm

Gun laser engraver adopts lifting wheel and measures to adjust the focus length conveniently.

IPG and Raycus(optional)

2D working table for X and Y axis moving.

Rotary device for option.

XTL-FP 30/50 Mini model

  • portable model
  • Raycus/IPG laser source
  • China Famous Galvo head
  • Manual/Motorized up & down.
  • It can fit 110*110mm working area.
  • Packing size:79*72*84mm
  • Weight: 96 KG
  • It can add somker


















After sales service

  • XTLASER provide you Two years warranty for full machine,if some spare parts broken within warranty,we will repair it for free.
  • We have online after sales department,they can Speak English well,can from Email,whatsapp, FB, wechat, skype, phone call to solve your problems within 8 hours as the time difference.


Metal deep engraving laser machine,gun firearms laser engraving machine-Jill

Metal deep engraving laser machine,gun firearms laser engraving machine-Jill

We sent many machines to firarms industry,we have 15 years’ experience.We are experienced in this field.

Here we share more.


1.Machine  picture


2.Secondly,Machine watt.

20w for surface simple marking.

30w 50w and 60w for deep engraving.


3.And aslo,Gun engraving videos.


4.Laser source

IPG,Germany brand,No.1 in workd,but expensive.

Raycus and Mopa JPT,No.1 in China,cost-effective.

20w,30w,50w,100w,most choose IPG and Raycus.Raycus is the best seller.

60w Mopa JPT,its single pulse energy is higer.

If you want to do deep engraving faster,u can choose this.


5.Galvo head

Sino galvo is the best seller in China now.



Marking lens can be China brand and Singapore brand.

Singapore wavelength is the best now.

Marking area is 70*70mm,110*110mm,150*150mm,175*175mm,200*200mm,300*300m.

For deepe ngraving,most choose 110*110mm.


7.Control board ans software

JCZ control board from Beijing.

Original JCZ is stable with software Ezcad 2.14.10.

It supports win7/8/10.

Copy version is not stable and with software Ezcad lower version.

It supports only one computer version win7/32bits.

Be careful when you buy machine,it influence your marking machine working directly.


More questions just let us know.
Jill from XT LASER
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01