Laser cutting machine oxygen cutting problem solution
Laser cutting machine oxygen cutting problem solution
Laser cutting machine is not like the familiar daily necessities, so the laser cutting machine out of the problem sometimes it is difficult to find a solution, laser cutting machine oxygen cutting problem how to do? New day in the low power laser laser cutting machine manufacturers for you to collate some common laser cutting machine oxygen cutting problem solution for your reference.
1: The traction line at the bottom has a large offset, the bottom of the kerf is wider
Feed rate elevated, reduce the feed rate
Laser power is too low, adjust the high peak power, increase the duty cycle
Air pressure is too low, increase air pressure
Focus is too high, reduce the focus
2: burrs on the bottom burrs similar to slag, easy to remove in the form of droplets
Feed rate too high, reduce feed rate.
Focus too high, lower focus
Insufficient air pressure, increase air pressure
3: Metal burrs that are connected together can be removed as a single piece.
Focus is too high, lower the focus
4: Burrs on the bottom edge are difficult to remove
Feed rate too high, reduce feed rate.
Focus is too high, lower the focus
Air pressure too low, increase air pressure
Gas is not pure, use purer gas
5: Burr on one side only
Nozzle not centred correctly, re-centre nozzle
Nozzle mouth defective, replace the nozzle
6：Cutting slag splash out from above, the workpiece is not cut through
Power is too low, increase cutting power
Feed rate is too high, reduce the feed rate
7: Cutting is not precise
Air pressure is too high, reduce air pressure
Nozzle is too big, replace the appropriate nozzle
Nozzle damage, replace the nozzle
8：Cutting surface roughness is too large, there are burrs
Focus is too high, reduce the focus
Air pressure too high, reduce air pressure
Feed rate is too low, increase the feed rate
Material is too hot, increase the stop light blowing time
Nozzle is too high, reduce the nozzle height
9: Corner burning
Air pressure too high, reduce air pressure
Feed rate too low, increase the feed rate
Too much power, reduce the peak power, reduce the duty cycle
Ltd. was founded in 2004, is located in the spring city of Jinan. The company is committed to providing the global laser field advanced laser cutting machine, marking machine, welding machine, cleaning machine, bending machine and supporting automation systems and other laser industrial equipment and the whole process of the service system, is a collection of research and development, production and sales as one of the professional laser industrial application solutions provider. As a pioneer in China’s industrial laser equipment manufacturing, XTLASER products are highly favoured by the market and are sold well in more than 160 countries and regions around the world, with a cumulative total of 100,000+ customers.