XT Metal Laser Cutting Machine

The selection of a suitable laser cutting machine generally depends on the production material, and needs to consider cutting accuracy and smoothness of the cutting surface: the cutting surface of laser cutting is free of burrs; Small thermal deformation: Laser cutting has small slits, fast speed, and concentrated energy, resulting in small heat transfer to the material being cut and minimal material deformation.

The metal laser cutting machine industry is a familiar type of equipment. Metal laser cutting machines can cut various materials. When purchasing a metal laser cutting machine, it is important to understand your own needs, not only to understand the cutting materials and thickness, but also to choose from production processing and material conservation aspects. When choosing a metal laser cutting machine, it is not only necessary to consider current needs, but also future needs. With the increasing use of laser cutting machines, a large amount of dust is inevitably generated in daily use. Over time, the dust on the machine will settle down. How to clean the dust inside the engraving machine in order to better maintain and maintain the machine without affecting its processing?

Firstly, it is not important to clean the dust on the metal laser cutting machine, but it is not recommended to clean the dust inside the machine. If not cleaned properly, it is easy to scratch the laser head, resulting in inaccurate positioning of laser reading and writing data.

Secondly, as long as dust does not fall on the surface of the laser head, it will not affect its use. The safest way is to use a blowing balloon (a cheap tool for cleaning digital DSLR CCD) to turn the metal laser cutting machine upside down (with the laser head facing downwards) and blow away the dust.

In addition, special attention should be paid to water replacement and tank cleaning (it is recommended to clean the tank and replace the circulating water once a week). The dust from metal laser cutting machines mainly affects the heat dissipation of electronic components and the sensitivity of photosensitive components. Common phenomena include optical inspection failure and computer CPU fan not rotating. So, in addition to dust, there are also some factors that can affect the processing process of metal laser cutting machines.

The power supply of metal laser cutting machines has the most direct impact on processing, mainly manifested in the disorder of the control system. All electronic devices and functional components of the SMC control system have a certain voltage and frequency range. The overload operation of any component will inevitably lead to the instability of the entire system, and a common phenomenon is machining deviation.

The vibration of metal laser cutting machines is affected by frequent cutting and surface roughness. The common reason is when encountering the machine tool during processing, the installation level of the machine tool is not qualified, and there are stamping machines around.

Metal laser cutting machines generally do not exhibit uneven or serrated carving surfaces caused by blade collapse or edge breakage. If you find that the carving surface is not smooth or serrated, first check whether the model and size of the carving knife used are suitable. If the handle is extended too long, the tool will deform and become larger during processing, resulting in an unsmooth machining surface and serrations.

The environmental temperature and humidity of metal laser cutting machines mainly affect the performance of control systems and drive motors. When the ambient temperature exceeds 40 degrees Celsius, the control system may control incorrectly, and the driving torque of the drive motor may not reach the rated value.