XTC-F1530G fiber laser cutting machine with housing-Ariel

XTC-F1530G fiber laser cutting machine with housing

Hello everyone,this is Ariel from XTLASER,responsible for European market.Nowadays fiber laser cutting technology is more and more popular.So today we would like to share you the most popular laser cutting machine in European market- XTC-F1530G fiber laser cutting machine with housing.

Laser Source Antifreeze Guide

1.Laser power

2000w-8000w can be choose.It can meet you most requirment.s

2.Laser source

we have IPG,Raycus,MAX laser source can be chose.IPG is German brand ,it is more stable than other brand.Here are IPG’s advantageds.

1)Its high photoelectric conversion rate Can reach 45%. Raycus or Maxphotonics are only about 25%.IPG can help users lower down production cost, improve production efficiency , in the long run, users can gain more profit .

2)German brand ,good quality,laser power weakened slower than other brand.Users can use IPG laser source machine for 4-5 years longer time than other brand laser source, so higher vaule will be created by IPG.

3)High market share, a certain degree of reaction to brand strength and quality.Overseas big machine suppliers, such as Bystronic,LVD .etc, also are using IPG laser source.

4)low failure rate, only 3%, such low failure rate can make sure that  your production can not be affected very much.

5)light power can be seen in real time

6) IPG has been in laser industry for very long time, it has very good after-sale service support all over the world, problems can be resolved in time.

3.Voltage transformer and Stabilizer

Machine supports 3 phases 380V.

If you use machine in NorthAmerica,such as USA and Canada. And then you need to add a voltage transformer.

For 3kw,50kva is okay.If you also use the air compressor,you can choose 80kva.

4.Cutting video

 

Contact us for more machine details.

Ariel Liu

Email:xintian122@xtlaser.com

Whatsapp:0086 17866940010