Posts

Tube and plate fiber laser cutter:Ariel

/in /by

Tube and plate fiber laser cutter

Tube and plate fiber laser cutter.

Metal laser cutting machine applications are very extensive.It include many industries, and is one of the must-have equipment for many companies.

Firstly,Advertising signage .(these are mainly stainless steel LOGO and logo cutting)

Secondly,sheet metal processing. (Basically, in the gold processing,it includes all the metal materials . These are generally bent, polished, etc. Cutting is one of the most important processes.

Thirdly,The production of chassis cabinets. (in this regard, carbon steel or stainless steel ).

Fourthly,Bent & Cut 2 Cutting Processes, Spring Plates (belonging to the finishing process), Metro Parts, Elevator Shells, Mechanical Equipment Shells, Kitchen Kitchenware (Stainless Steel).

Finally,Widely used in sheet metal processing, advertising signage word production.high and low voltage electrical cabinet production, mechanical parts. kitchen utensils, automobiles, machinery. metal crafts, saw blades, electrical parts, eye wear industry. spring sheet, circuit board, electric kettle, medical micro Electronics. hardware, knife measuring tools and other industries.

Some customers ask about the CNC cutting machine.

CNC cutting: if the cutting speed is too low and the air pressure is too high, then the slag is severe, it is difficult to remove, and the finish is poor.

If the cutting speed is right, the working pressure is too high.That damages the stiffness and smoothness of the arc column . Also reduce the cutting ability, and the cutting finish is poor.

Since there is no tooling cost, laser cutting equipment is also suitable for producing small-lot parts of various sizes. that were previously impossible to machine. Laser cutting equipment usually uses computerized digital control technology (CNC) devices. With this device, cutting data can be accepted from a computer-aided design (CAD) workstation using a telephone line.

Punch press is a stamping press. In the national production, the stamping process has the advantages of saving material and energy.When comparing with traditional machining, high efficiency, low technical requirements for operators.Its use is more and more extensive.

Following with one cutting video:

If you do not make sure a suitable machine,tell me.And i will help you to get a better solution.

Maybe you do not need a higher laser power,maybe you do not need a larger area.

https://youtu.be/v55UMC4Ly6k

You can send me your requirements to my email.And its better to write what material you need to cut?

What thickness?Max area?

Waiting for your coming:

Email: xintian122@xtlaser.com

Whatsapp:+8617866940010

The introduction of plate and tube fiber laser cutting machine-Ariel

/in /by

The introduction of plate and tube fiber laser cutting machine

This article is about the introduction of plate and tube fiber laser cutting machine.Hope it can help you learn more about it.

1.Tube and plate cutting machine, which can not only cut plate and also tube.

laser

3m length or 6m length

① In such machine, rotary size including 160mm and 200mm

If 160mm diameter rotary, it can hold maximum no more than 160mm round tube , and maximum 109m*109mm square tube

If 200mm diameter rotary, it can hold maximum no more than 215mm round tube，minimum 12mm , and minmum 20*20mm, maximum 150mm*150mm square tube

② If client choose automatic clamping, then front rotary is electric clamping (speed of clamping can be adjusted), back rotary is pneumatic clamping(speed of clamping can be adjusted)

③ About weight

No matter it is 3m or 6m, maximum weight is no more than 150kg

④ front rotary is electric clamping , back rotary is pneumatic clamping

220mm rest tube, minimum length  after cutting

2.Tube cutting machine, 6m length

① In such machine, rotary size including 230mm and 300mm

230mm diameter rotary, it can hold maximum no more than 230mm round tube , and maximum 160mm*160mm square tube

300mm diameter rotary, it can hold maximum no more than 320mm round tube , and maximum 240mm*240mm square tube

② All of rotaries are pneumatic clamping (speed of clamping can be adjusted)

③ About weight

No matter it is 6m, maximum weight is no more than 300kg

About the choice of the laser tube  machine,if you want to cut plate and tube both,you can choose the plate-tube machine.

If you want to cut tube only,and the professional laser cutting tube machine is suitable.

Hope this article can help you know more to choose machine.

 

If you are interested in this article and want to know more details,feel free to contact me.

Wendy from XTLASER

Email:xintian122@xtlaser.com

Whatsapp:0086 17866940010

Youtube link:https://www.youtube.com/channel/UCMSRFDpTVYyIyzM3wBmBZyg

Website:www.xtlaser.com

Why choose plate and tube combined fiber laser cutter-Ariel

/in , /by

Why choose plate and tube combined fiber laser cutter

For fiber laser cutting machine,we have one model-plate and tube fiber laser cutting machine.So why choose plate and tube combined fiber laser cutter?We will talk this topic today.

In XTLASER,we have Plate Laser Cutting machine ,Tube Laser Cutting machine and Plate and Tube laser cutting machine.

Then maybe some people will confuse and ask why do you make a plate and tube laser cutter？

We mentioned our customers come from all works of life.So we make this combniation cutter  in order to Meet their needs of plate cutting and pipe cutting.

Next, i will tell you the advantags og plate and tube laser cutting machine.

1,almost the same price

For laser cutting machine,

In different prices, the type of machine is not the most important part, and the power of the machine is the key factor.

Because for manufactures,plate cutters or tube cutters just has difference shapes.And just need some metal meterial can solve it.

About machine power,the higher the power, the more expensive the machine will be.

Take a simple example.If you buy an iphone, it may only cost a few hundred dollars to buy an iphone 8 now.

But if you buy an iphone12,maybe you need some thousands dollars.(That just is a example,not a truth)

The two are the same truth.

And if you have $50,000 burget,and you want to cut plate at most,few cut ube.

We will recommend the combniaton cutter,although it is a little more expersive.

2,Plate and Tube Laser Cutting Machine type

For laser machines,we have opening and enclosed.

There is no difference between them, it just depends on the choice of customers.

Opening Plate and Tube laser cutting can be shown smoothly.

And enclosed Plate and Tube laser cutting is safety and no pollution.

 

In the end, if you browsed this title and interested in our combnation cutters,pls don’t hesitate to contact me.

I Will be pleased to give you more information.

My email is xintian122@xtlaser.com

And my Wechat and Whatsapp is +86 17866940010

Youtube homepage:https://www.youtube.com/channel/UCMSRFDpTVYyIyzM3wBmBZyg

Looking forward to receive your letter early.

Auxiliary gas of fiber laser cutting machine-Teresa

/in , , /by

Auxiliary gas of fiber laser cutting machine.

Auxiliary gas of fiber laser cutting machine.

When cut the fiber laser cutting machine, different cutting gases according to the material of the cutting plate. The choice of gas and pressure has a great impact on the quality of fiber laser cutting machines.

Effect of cutting gas and pressure on cutting quality

1) The cutting gas helps to dissipate heat and assist combustion.And blows off to obtain a better quality cut section.

2) When the pressure of the cutting gas is insufficient, the melting will occur during cutting, and the cutting speed cannot meet the production efficiency.

3) When the pressure of the cutting gas is too high, the influence on the cutting quality: the cutting surface is rough, and the slit is wide; at the same time, the cut section is partially melted, and a good cutting section cannot be formed.

The effect of cutting gas pressure on perforation.

1) When the gas pressure is too low, the laser does not easily penetrate the cut sheet, and the punching time increases, resulting in low productivity.

2) When the gas pressure is too high, the penetration point is melted to form a large melting point, which affects the quality of the cutting.

3) When laser drilling, generally, a higher gas pressure is to the punching of the thin plate member.

And a specific punching method for the punching of the thick plate member.

Tthereby eliminating the disadvantage of the low air pressure to protect the lens.

4) When the laser cutting machine cuts ordinary carbon steel, the thicker the material, the lower the pressure of the cutting gas. When cutting stainless steel, the cutting gas pressure increases relatively with the thickness of the material. In short, we need choose cutting gas and pressure during laser cutting according to the actual situation during cutting. In specific applications,Select different cutting parameters according to the specific conditions.

Anything more you want to know about fiber laser cutting machine.

Contact us.XTLASER

Email:xintian105@xtlaser.com

Mobile/Whatsapp: +8615006829603

Tube fiber laser cutting machine-Nancy

/in /by

Tube fiber laser cutting machine-Nancy

Tube fiber laser cutting machine-Nancy

Now more and more customers inquire fiber laser cutting machine for tube and pipe.

Here XTLASER new tube fiber laser cutting machine model introduce to you.

Firstly, tube fiber laser cutting machine model show you:

 

 

 

 

 

 

 

 

Secondly, tube fiber laser cutting machine have 6m and 9.2m length pipe.

the machine pipe length design is according to pipes international standards and most customers need.

So those length can meet most customers’ work.

Thirdly, tube fiber laser cutting machine with double pneumatic chuck.

Pneumatic chuck advantages comparing with electrc chuck:

1.Double jaw desgin

2.Fast clamping speed.

3.High clamping accuracy

4.The remaining material is short.

5.Cutting thin tube no deformation.

Fourthly, have support devices, it can well support the pipe and avoid thin or light pipe sagging when cutting.

 

 

 

 

 

 

 

And in the front and back there also have pipe support devices.

When the pipe is cut, the front pipe device pipe will transfer, it is very conveninet to collect finished pipe.

Fifthly, tube fiber laser cutting machine not only can cut round pipe and square tube, but also shaped tube.

Tube fiber laser cutting machine is widely used in many industries, like stairs, building, Kitchenware etc.

More info you can contact me:

Email: xintian123@xtlaser.com

WhatsApp&WeChat&Phone: +86 17854271909.

XTLASER website: https://www.xtlaser.com

Laser cutting machine in metal fabrication industry-Teresa

/in , , , , /by

Laser cutting machine in metal fabrication industry

The laser cutting machine is a product of modern scientific development, and it is also a technological revolution in sheet metal processing, and has brought a revolutionary concept to sheet metal processing. Laser cutting technology and laser cutting machine equipment are being familiar and accepted by the majority of sheet metal processing companies, and are gradually replacing traditional sheet metal cutting equipment with many advantages such as high processing efficiency, high processing accuracy, good cutting section quality, and three-dimensional cutting processing. ( Mainly with numerical control equipment, including traditional plate processing equipment such as shears, punches, flame cutting, plasma cutting, high pressure water cutting, etc.).

Laser processing technology has a very important position in the sheet metal processing technology, which improves the labor productivity of the sheet metal process and promotes the development of the sheet metal process. The high degree of flexibility of the laser cutting machine can greatly reduce the processing cycle. The cutting speed is fast, the production efficiency is high.  The processing accuracy is improved, and the product development speed is accelerated.

The use of sheet metal laser cutting machine has the following six advantages:

Firstly,  Laser cutting has a high degree of flexibility, fast cutting speed, high production efficiency and short product production cycle.

Secondly, Laser cutting has no cutting force and processing without deformation;

Thirdly, No tool wear, good material adaptability, long effective life,

Fourthly, Regardless of whether it is simple or complex sheet metal parts, it can achieve high precision cutting and rapid forming at one time;

Fifthly, The cutting seam is narrow. The cutting quality is good. The degree of automation is high. The operation is simple. The labor intensity is low, and there is no pollution;

Sixthly, It can realize cutting and automatic layout and nesting, which improves the utilization rate of materials.  Low production costs and good economic benefits.

For more information about laser cutting machine, welcome to contact us.

Email: xintian105@xtlaser.com

Whatsapp: +8615006829603

Skype: xtlaser Teresa

why choose IPG fiber laser cutting machine-Jill

/in , , /by

why choose IPG fiber laser cutting machine-Jill

 

Firstly,IPG laser source

IPG is Germany brand.It is made in China,Russia,USA.We send it by random.

Advantage of IPG
1）High photoelectric conversion rate
Can reach 45%, other brands are only about 25%
2）German brand ,good quality，laser power weakened slower than other brand.
3）High market share, a certain degree of reaction to brand strength and quality
4） low failure rate, only 3%
5）light power can be seen in real time
6）after-sale service spots all over the world, problems can be resolved in time

Secondly,nLIGHT laser source

nLIGHT , Raycus, IPG , are three popular band laser source in market,
Raycus and IPG are for normal metal, such as carbon steel, stainless steel , galvanized sheet .etc, not high reflective metal.
But some clients want to cut some high reflective metals, such as aluminium, copper, brass, etc.
If use Raycus or IPG to cut high reflective metal, laser source will alarm, and do harm to laser source, because laser beam will return back to laser generator.

But nLIGHT laser source, it has Back-reflection isolation, so it can not only cut carbon steel, stainless steel , galvanized sheet .etc, not high reflective metal, and high reflective metals, such as aluminium, copper, brass, etc.

 

And also,we share the Cutting videos FYI.

brass cutting:

https://youtu.be/qaUN449oBys

https://youtu.be/JAGbBeFRcHg

Aluminum cutting:

https://youtu.be/3y8NhMjVDZ0

https://youtu.be/owI4wZvfuUs

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

fiber laser cutting machine software cutting system,how to choose-Jill

/in , , /by

fiber laser cutting machine software cutting system

For China fiber laser cutting machine,there are many cutting system,here we introduce the most popular one.

1.For plate cutting

Now the most popular cutting sytem is Bochu Cypcut.

It also depends on the machine power.

If power is less than 1kw,it is Bochu Cypone,FSCUT1000.

 

 

 

When it is over 1kw,it is Bochu Cypcut,FSCUT2000.

 

 

 

If 8kw or over 8kw,it is Hypcut,FSCUT8000.

 

 

So,what file format does Cypcut and cypone support?

AI、DXF、PLT、Gerber、LXD （DXF、PLT most common）

 

2.For tube cutting

There are 2 kinds of machines.

1st,plate and pipe cutting machine.For this ,It is Cypcut FSCUT2000 &Cyptube FSCUT3000S.

 

 

 

2nd,pipe cutting machine.For this ,It is TubePro,FSCUT3000S.

 

 

 

So,what file format does it support?

Both of Cyptube and TubePro support IGS format.

 

3.FSCUT2000 whole set

 

 

 

 

 

 

4.Cypcut support language

Simplified Chinese, Traditional Chinese, Czech, German, English, Spanish, French, Italian, Japanese, Korean, Dutch, Russian, Portuguese.

 

 

 

 

 

 

 

 

 

5.Height controller

It can calibrate if the metal sheet flat or not, adjust it by control the cutting head up and down, sometimes, this controller is not appear in outside, just in the software.

 

 

 

 

 

For more information,contact us and let us know.

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Tube fiber laser cutting machine working efficiency-Teresa

/in , , /by

Tube fiber laser cutting machine working efficiency

Tube fiber laser cutting machine working efficiency.

Compared with traditional processing methods, laser cutting machines have many advantages.

High cutting flexibility.The ability to cut, layer, specify blocks or select areas for cutting and direct molding allows you to freely cut and freely cut.

The cutting quality is good.The contour of the film is round and smooth, smooth and burr-free, and there is no overflow glue, which effectively solves the problem of burrs and glue overflowing near the window by mechanical processing such as mold, thereby improving product quality and upgrading. Product competitiveness.
Accurate positioning: PC/PCB contour cutting, drilling High-precision CCD automatic positioning, auto focus, making positioning fast and accurate, saving time and worry, high efficiency.

The advantages of laser tube cutting machines compared to traditional cutting.

Firstly, processing mode, high efficiency After focusing, the extremely thin laser beam like a tool, which can cut the metal material arbitrarily finely without mechanical extrusion or mechanical stress, so it will not damage the shape of the object. The size of the beam after laser focusing is extremely small, and the heat-affect area is small. The slit is smooth and beautiful, no need for subsequent processing, and the processing is fine. Therefore, laser machine can complete some processes that conventional methods can not make it.

Secondly, low cost, fully automatic, easy to operate.

1, laser processing speed.
2. The “tool” used in the tube laser cutting machine is the spot after focusing. No need to add other equipment and materials. Only the laser can work normally, and it can process continuously for a long time.
3. The laser processing is automatically controlled by the computer, and no manual intervention is required for production.

Thirdly, the realization of zero backlog inventory laser processing flexibility, easy to change. For different customer orders, just draw a processing map on the computer, the product can be released immediately, saving the conventional mold opening production costs, so it effective Avoid differentiated production of the same product and reduce the risk of product backlog.

Finally,if you are looking the laser machine,hope our suggestions can help you.

whatsapp/wechat:+8615006829603

email:xintian105@xtlaser.com

Learn how to adjust fiber laser cutting machine focusing-Anne

/in , /by

Learn how to adjust fiber laser cutting machine focusing

For now,more and more customers using laser cutting machine.

Today XT LASER will share with you how to adjust fiber laser cutting machine focusing:

1. Testing cut, observe cutting section to judge if the focus point is too big or small. Slag (too big), Grain (to small).
2. Turn on the focal point control panel before cutting head to do manual focal point adjust.
3. When focal point data is 0, turn the focusing wheel to the left, then do cutting test.
4. When the focal point data is too small, there is slag at the rough bottom of the surface of the cutting sample (the focus is too small to cut through).
5. When the focal point data is +5 or bigger, turn the focusing wheel to the right, then do cutting test.
6. Cutting surface has obvious pattern on when the focal point data is too large.
7. After cutting test, observe the cutting surface and adjust the focusing wheel till the right data.
8. When the focal point is at the right place, the surface of the sample is smooth and without hanging slag.
9. Finish the testing.
10. Focusing adjust for carbon steel ( the same as manual laser cutting head focusing)
12. Focusing adjusting for stainless steel (the same as manual laser cutting head focusing)

Sales Manager:Anne Zhang

Mob.whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

If you have any questions,welcome to contact to XT LASER.