https://www.xtlaser.com/wp-content/uploads/2019/11/logo.png 0 0 admino https://www.xtlaser.com/wp-content/uploads/2019/11/logo.png admino2017-06-19 07:26:342017-06-19 07:26:34How to operate the fiber laser metal marker machine-Jennifer
- Today, we’d like share something about how to use and operate the metal engraving machine.
And we know it is important to every clients, who use this laser metal fiber marker firstly, so before delivering out, the Ezcad fiber laser metal engraving software will be installed on the laptop, and the machine will be tested 48 hours at least.
If these is no problems about the machine running, then the parameters will be saved in the F disk, and send the COPY version to the USB disk.
- Except the parameters and software,the USB disks will save the Software User Manual, Machine User Manual, and Software operating videos, which can make sure clients operate the fiber laser metal printing machine easily, once received the machine.
- All our software support English language,and what’s more, you can also learn the Ezcad firstly, by the download the demo version:
I believe this software is quite easy to operate, no worries about the operate.
- Welcome to make the field inspection in our factory, today, our Australia clients make the field inspection for metal fiber laser engraving machine. After the field inspection, our clients give the highly recongnisaton about our machine and service. The followings are the details in XT LASER’s factory for your reference.