Machine maintenance for fiber laser cutter:Charry

Machine maintenance for fiber laser cutter

Machine maintenance for fiber laser cutter

Firstly, Recycle Water Replacement and Tank Cleaning.

The quality and temperature of the circulating water directly affect the service life of the laser source. Therefore, regular replacement of circulating water and cleaning of the tank is important. This is best once a week.

Secondly,Fan Cleaning.

The long use of the fan in the machine will cause a lot of solid dust to accumulate inside the fan, causing the fan to generate a lot of noise, and it is also not conducive to exhaust and deodorization. When there is a shortage of suction from the fan, the fan must be cleaned.

Thirdly,Lens Cleaning.

There will be mirrors and focusing mirrors on the machine. The laser is reflected and focused by these lenses and emitted from the laser head. The lens is easily stained with dust or other contaminants, causing loss of the laser or damage to the lens. So clean the lens every day.

Attention should be paid when cleaning: 1. The lens should be gently wiped, and the surface coating should not be damaged; 2. The wiping process should be handled gently to prevent it from falling off; 3. Be sure to keep the concave face down when installing the focusing lens.

Fourthly,Guide rail cleaning.

The guide rail and linear shaft are one of the core components of the equipment. Its function is to guide and support it. In order to ensure the machine has a higher processing accuracy, it requires its guide rails, straight lines have a high guide accuracy and good movement stability. During the operation of the equipment, a large amount of corrosive dust and fumes will be generated during the processing of the work piece.

The smoke and dust will be deposited on the surface of the guide rails and linear shafts for a long period of time, which will have a great influence on the processing accuracy of the equipment. Erosion points are formed on the surface of the linear axis of the guide rail, shortening the service life of the equipment So clean the machine rails every two weeks. Turn off the machine before cleaning.

More details,contact us:

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

    Get a Quote

    Need Help?

    Fill out the form below and support will be available within the hour!