From what angles can the quality of the laser cutting machine be judged?-Serena

From what angles can the quality of the laser cutting machine be judged?

When a new customer inspects a laser cutting machine for the first time, they will require on-site proofing. In addition to looking at the cutting speed, more importantly, the overall quality of the cutting. So in which dimensions can the quality of a laser cutting machine be measured? The following will give you a detailed introduction

Roughness

The section of the laser cutting machine will form vertical lines, and the depth of the lines determines the roughness of the cutting surface. The shallower the lines, the smoother the cut section. The degree of roughness not only affects the appearance of the finished product, but also affects the degree of friction. In most cases, it is necessary to reduce the depth of the cut section. The smoother the surface, the better the effect.

Verticality

If the thickness of the cut sheet exceeds 10mm, the verticality of the cutting edge becomes very important. During the cutting process, the laser head moves from far to near and from top to bottom. When the focus beam is farther away, it becomes scattered. The closer it moves toward the target, the beam becomes more concentrated, and verticality occurs in the middle. Deviation, and the smaller the vertical deviation, the stronger the performance of the machine

Cut lines and burrs

As we all know, the advantages of laser cutting machines compared to other processing equipment are that the cutting burrs are small, the efficiency is fast, and the accuracetal residue will not appear on the verty is high. When the laser cutting machine is processing thick plates, the molten mical cutting surface, but will appear obliquely below, which causes the gas to blow away from the slag when the slag is blown, and it forms after cooling. Cutting dross and burrs. In order to correct this problem, it is generally to reduce the speed when the cutting is about to end, so as to reduce the dross and burrs as much as possible. Therefore, when cutting medium and thick plates, the less burrs and dregs, the better the machine quality!

I hope users will keep these points in mind when purchasing a laser cutting machine. Of course, the culture of a company is examined. After-sales service and service are also the top priority. middle.

    Get a Quote

    Need Help?

    Fill out the form below and support will be available within the hour!