The quality of fiber laser cutter machine is a matter of concern to the customer, and is also a skill training that the machine operator need to continuously improve. But the most important is that if you want to cut a satisfactory sample, you need to use the laser cutting machine for steel scientifically.
The following three points will show us how to judge the quality of cutting. And learn how to make a high quality metal with fiber laser metal cutter:
1.Smooth cutting edge without brittle rupture and cutting pattern or with only little pattern.
When the optical fiber laser machine cuts, the marks will displayed after the laser beam deviates. So the formation of the pattern eliminated by reducing the rate slightly at the end of the cutting process.
2.Cutting slit width. This factor related to the thickness of the plate and the size of nozzle.
In general, when the plate is narrow, the nozzle should be small. Because the amount of jet required is relatively small. Similarly, if the plate is thick, it needs more jet, so the nozzle is also large. The seam will also widened accordingly. Therefore, to find the appropriate type of nozzle, can help customers cut out a good product.
3.With a good verticality, small head effected area.
It’s import factor of verticality, when the laser beam is far away from the focus, the laser beam will diverge. According to the focus position, the becomes wider toward the top or bottom, and the more perpendicular the edge, the higher the quality.
XTLASER provide high quality laser machine professional for metal cutting, welcome to contact us if you have any needs!
Facebook:firstname.lastname@example.org Luis Li
Skype:Luis Li, email@example.com