The main parts of fiber laser engraving machine
We will introduce the main parts of fiber laser engraving machine in this article.
Fiber laser engraving machine could achieve deep engraving outcome on the metal.
As we know, the fiber laser marking machine could achieve different outcome on the metal.
For example, the surface marking and deep engraving.
For different requirements of different customers, we introduce the different power machine to them.
The machine parts
Firstly,Laser source: Raycus laser source, the best brand in China.
Lens: 110*110mm lens, wavelength brand from Singapore.
Control card: JCZ control card from Beijng, the best one in China.
Software: EZCAD software, from Beijing JCZ company.
Working table: 2D working table, for focus distance adjust by up-down/forward-backward/left-right moving.
* Galvo head: SINO brand galvo head, the most hot selling one in market.
For the laser source, the two most common type is the Raycus and IPG.
Most western customer and Indian customer prefer the IPG laser source.
And for the lens, also called the working area.
According to our testing experience, the 110*110 working area lens is the most suitable for the deep engraving.
The smaller the lens is , the more concentrated of the light.
So using the 110*110 lens could achieve the best outcome in the short time.
For the fiber laser engraving machine, the only consumable parts of the machine is electricity.
Because The laser source lifetime could reach 100000 hours.
So No any other consumable parts.
Besides, the software and machine is easy to learn and operate.
Therefore, more and more customers buy this machine for working.
If you need other information,pls feel free to contact us.