Standard operation of fiber laser cutting machine-Shelly

Standard operation of fiber laser cutting machine

Standard operation of fiber laser cutting machine.

Laser cutting machine is an important equipment for sheet metal processing. Correct use of laser cutting machine is also an important prerequisite to improve its service life. Therefore, after buying the machine, we must grasp the standard operation process and methods of the machine, so as to reduce the failure rate and improve the service life. Here we introduce the standard operation process of laser cutting machine:

First of all.  We should strictly follow the rules and follow the principles of boot-up and shutdown. And we should not force the shutdown or opening.

Secondly.  Employees are not allowed to operate machines without training.  And only after complete training can they operate on computers.

Thirdly. During the working process of laser cutting machine. And the outsiders are not allowed to access the operating and console, and the core operation links must be completed by professionals.

Fourth. When we adjust the optical path of machine tools, adjust the cutting head under the random method, force to follow the accurate control process, to ensure the safety of man-machine.

Fifth, every time the machine starts, we need to refer to the point, check and process the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1 Mpa.

Sixth. We should inspect once a week the external light path safeguard gas, cold circuit cabinet, cooling River road, air compressor, cold dryer, drain filter water.