How to reduce the loss when use fiber laser cutter to cut thin Plate?-Cathy
In recent years, with the development of laser technology and the expansion of market demand, thin fiber laser cutting machine technology has been more and more widely used in the field of metal processing, thin plate laser cutting machine is not a cheap equipment. So we should take care of them when we use them.
At present, many enterprises have introduced thin plate laser cutting machines. When using thin plate optical fiber laser cutting machines, some operators less of experienc or skill. This resulting in not being very careful in using the equipment. In the process of operation, the thin plate laser cutting machine has caused great losses. Especially in the parts of mechanical precision parts, such as laser head. When these minor problems are ignored or can not be solved very well. After a certain period of loss and accumulation, like people, the problems of optical fiber laser cutting machines will be exposed and will occur frequently. So how to reduce the loss of thin plate laser cutting machine? Next, let me Let’s take a quick look at it.
Before turning on the optical fiber laser cutting machine, operator should move the beam back and forth by hand. And the car moves from side to side without abnormal noise, so that it can be electrified. When the thin plate laser cutting machine completes the work of the day, operators should clean the scraps and fragments in the machine carefully. Although the laser head has a gathering protective mirror, operator should clean it up. Which can prevent the machine moving system from damage due to the external operation.
How to reduce the loss of thin plate laser cutting machine?
Clean up the moving parts of the laser cutting machine, so that the machine can maintain a good working condition:
First, add a little lubricating oil to the screw, including the laser tube support and the screw on the first mirror. You can be easily disassemble and assemble them during maintenance. Note: do not add lubricating oil to synchronous belt, drag chain, trachea, motor, sensor and lens, wire.
Second, do not place items in the machine to avoid unnecessary damage to the machine.
Third, use cotton cloth to clean up the dust and foreign bodies on metal tankers, metal shafts, sliders and linear guide rails. Then add lubricating oil, and carry on empty reciprocating motion. Optical fiber laser cutting machine to cut the main mode, used in metal cutting. The laser cutting machine has a laser beam diameter of 0.1 mm and a diameter of about 0.2 mm on a metal material. Therefore, the cutting pattern is very accurate, and it not only improves the artistic taste and technical content of sheet metal processing, It also improves profit margins. So everyone in the operation of optical fiber laser cutting machine must be cherish, standardized operation. So that the equipment can be better for the larger Home service.
The above is how to reduce the loss of thin plate laser cutting machine, I hope this article can help everyone.