What affect the fiber laser cutting machine accuracy:Charry
What affect the fiber laser cutting machine accuracy
What affect the fiber laser cutting machine accuracy.
Some customers think that some suppliers configurations looks same,whatever it is cheap or expensive.But actually,many details decide the accuracy. Let me introduce the factors that affect the accuracy of the laser cutting machine.
Firstly,The shape of the laser beam: The beam emitted by the laser is tapered, so the slit is also tapered. In this case, the stainless steel with a thickness of 0.4 mm will be much smaller than the slit of 3MM.
Therefore, the shape of the laser beam is a major factor affecting the cutting accuracy of the metal laser cutter.
Under such a conical laser beam condition, the greater the thickness of the workpiece, the lower the precision, and therefore the larger the slit.
Secondy,The width of the slit. When the laser beams gathering together,the precision of the laser cutting becomes higher and higher, especially the width of the slit becomes smaller and smaller. At this time the smallest spot can reach 0.01mm. This is also one of the factors that affect the cutting accuracy of laser cutting machine s.
Thirdly,The accuracy of the workbench: If the workbench is not accurate or other reasons, it will lead to high-precision laser cutting effect.
Finally,Workpiece material: The cutting precision of different materials is also slightly different. Even with the same material, the precision of the cut will vary if the composition of the material is different. Therefore, the workpiece material also has a certain influence on the laser cutting accuracy.
If have any questions,just contact us.