How to deal with laser cutting machine smoke-Flora

How to deal with laser cutting machine smoke

How to deal with laser cutting machine smoke
Laser cutting is one of the most common metal cutting methods, with high work efficiency and easy use, which is very common in factories. However, using a laser cutting machine to cut metal plates will definitely generate smoke and dust. After these tiny soot particles are produced, they will float in the air in large quantities, seriously reducing air quality and destroying the working environment. The high concentration of smoke and dust is also extremely harmful to the workers working in it, often causing serious diseases such as respiratory diseases. How to deal with laser cutting machine smoke?
At present, the commonly used laser cutting dust removal methods are mainly divided into two types: dry and wet. The dry type is to add a set of laser cutting dust collection and purification equipment, and the wet type is to place the cutting process on the water to form a water bed cutting platform, which uses the power of the water flow to absorb dust and purify it. After a comprehensive comparison of the two methods, the dry treatment method, especially the blowing and cutting fume purification system, is particularly popular in the factory because it is particularly convenient to install and use. The smoke generated by laser cutting is concentrated under the cut of the workpiece. Therefore, there is an air suction port under the worktable. The lower part of the worktable is divided into uniform small suction areas. The smoke generated can be collected in the small area by suction. Cutting area.

One side of the cutting fume purification system platform is also provided with a sliding suction duct. The sliding suction duct is provided with a suction port that can move with the cutting head, and the opposite side is also provided with a blowing port. When soot is produced, the wind from the blowing port blows the soot to the suction port, thereby achieving the trapping effect of small air volume and high soot collection rate.

The collected cutting dust will be evenly transported to the dust removal host for filtering treatment. The host structure is the same as the welding dust centralized dust removal system. The installed filter cartridge will intercept dust larger than 0.3μm, thereby completing the purification process of cutting dust. This kind of blowing dust removal equipment has a processing efficiency of more than 90% for laser cutting dust, and the effect is very obvious. Because of its simple installation and low cost, it has become a particularly popular dust removal method for laser cutting.

XT laser is manufacturer of laser  machines  since 2004, any inquiry, feel free to contact us:

Email: xintian131@xtlaser.com

Skype: XTlaser-Flora

Mobile/Whatsapp/Wechat:0086 18354256184

Web: www.xtlaser.com

Youtube Homepage:https://www.youtube.com/feed/my_videos