Take one minute to learn auto wire feeder

Usually,we need auto wire feeder when we use fiber laser welding machine.

The auto wire will help the welding effect much better So how to use the wire feeder.

There are several steps

1, install the wire roll, the counter clockwise

2, pull down these two handle, then pull in the wire

3, release the screw

4, pull in the connector, then tighten the screws

5, connect the power and turn on the machine

6, put the black wire straight (must be straight)

7, release the screw on the nozzle. And press the “Run” until the wire come out from the nozzle.

8, connect the cable with welding machine.