Fiber laser cutting machine cutting iron sheet-Flora

Fiber laser cutting machine cutting iron sheet

Different power in metal laser cnc cutting machine, cutting capacity and cutting thickness range are not the same. Thus,  how to choose its power? Here we take you to understand the understanding.

How the metal laser cutting machine works?

Fiber laser cutting machine.
Fiber laser cutting machine.

Fiber laser cutting machine metal laser cnc cutting machine has a more prominent advantages. It depends on the laser generated by the high temperature, melting the surface of the sheet metal parts, through the control of displacement, to achieve the purpose of cutting. The advantages of laser processing is mainly reflected in. It does not produce deformation, high degree of flexibility, small slot, smooth section without burrs, to cut any complex graphics workpiece. So, for different thickness, power on the cutting quality and speed plays an important determinant.

Samples Analysis of metal laser cutter power:

We take the common 1000W-2000W, for example, for everyone to analyze:

Comparison of cutting process parameters between 100W and 2000W metal laser cnc cutting machine .  Carbon steel, when it is lower than 2mm,  the use of carbon steel. By 1000W machine’s maximum cutting speed is about 8 meters per minute. When using 2000W machine to cut the maximum, the cutting speed is about 16 meters per minute; 6mm carbon steel 1000W machine cutting the maximum speed of about 1.6 meters per minute, the use of 2000W machine cutting the maximum speed of about 3.2 meters per minute, and so on.

Next, stainless steel, for example, as shown in the figure, 2mm below the use of stainless steel 1000W machine cutting the maximum speed of about 16 meters per minute, while the use of 2000W machine cutting the maximum speed of about 33 meters per minute; 3mm or so stainless steel 1000W machine cutting the maximum speed of about 1.4 meters per minute, while the use of 2000W machine cutting the maximum speed of about 3 meters per minute, the gap is very obvious. It can be seen that the 1000W fiber laser cutting machine is clearly a more sensible choice when the opposite 1000W and 2000W fiber laser cutting machines.

XT laser is manufacturer of laser machines since 2004, any inquiry, feel free to contact us:

Email: xintian131@xtlaser.com

Skype: XTlaser-Flora

Mobile/Whatsapp/Wechat:0086 18354256184

Web: www.xtlaser.com

Youtube Homepage:https://www.youtube.com/feed/my_videos

    Nhận báo giá

    Cần giúp đỡ?

    Điền vào mẫu dưới đây và hỗ trợ sẽ có sẵn trong vòng một giờ!