Using a new fiber laser cutting machine+Karina
Using a new fiber laser cutting machine
Using a new fiber laser cutting machine.When buying a laser cutting machine, users may be focus on the price of the laser cutting machine, how to use it, how to achieve the ideal cutting speed, cutting effect, etc., but ignore what needs to prepare.when using the newly equipment.In fact, there are still many techniques for using the new machine.
Firstly. Select a dry, ventilated place with good air quality and sufficient space to place the equipment. After placing the new machine in an appropriate location, fix the equipment.
Secondly. Although the newly equipment has been debugged and tested for relevant parameters at the manufacturer, the newly purchased machine will inevitably be subject to bumps during transportation. Therefore, after the new machine has landed, it needs to be debugged on site.
Thirdly. When cutting with new equipment, try to avoid adjusting the cutting speed to the limit.
Fourthly. Almost all equipment supports 24-hour continuous operation, but during the operation of the new machine, try to avoid 24 hours of overload cutting in order to catch up with production capacity. This is not only applicable to the use of new machine skills in the subsequent cutting The same applies.
Fifthly. After the equipment arrives at the factory, there is a professional after-sales engineer for training in equipment operation. Be sure to listen carefully and ask some precautions to avoid machine failure caused by improper operation in a short time.
Sixthly. In the event of equipment failure, communicate with the manufacturer’s after-sales in a timely manner.
Finally, the newly purchased laser cutting machine must pay attention to daily maintenance and maintenance to achieve the maximum use value of the equipment and extend the service life of the equipment.
Any questions,contact us.