How To Extend the Service Life Of Fiber Laser Cutter machine-Serena

How To Extend the Service Life Of Fiber Laser Cutter Machine

The main components of the fiber laser cutter machine are the circuit system. the transmission system. the cooling system. the light source system. and the dust removal system.In the daily use of the laser cutting machine. The main parts that need to be maintain are the cooling system (to ensure the constant temperature effect). The dust removal system (to ensure the dust removal effect) The optical path system (to ensure the beam quality). And the transmission system (focus on ensuring normal operation) .

Preparation before installation
Preparation before installation

Firstly,Maintenance of Cooling System

First, replace the water inside the water cooler regularly. Usually once a week. The water quality and temperature of the circulating water directly affect the service life of the laser tube. So it is recommend to keep the water temperature below 35°C. If you don’t change the water for a long time. It is easy to form scale. It will block the waterway. So you must change the water regularly.

Second, keep the water flowing at all times. The cooling water is responsible for taking away the heat generated by the laser tube. The higher the water temperature, the lower the light output power (15-20°C water temperature is better). When the water is cut off, the tube end will burst due to heat accumulation in the laser cavity, and even damage the laser power supply. Therefore, it is necessary to check whether the cooling water is unblock at any time. When the water pump fails, it must be repaire in time to avoid power drop or even equipment damage.

More ways to extend fiber laser cutter machine

Secondly,Maintenance of Dust Removal System

After using the fan of the fiber laser cutting machine for a long time. A lot of dust will accumulate in it. It will affect the exhaust and deodorization effect. And also produce noise.When it is found that the suction power of the fan is insufficient. Turn off the power first. And remove the air inlet and outlet pipes on the fan to remove the dust inside. Then turn the fan upside down and move the fan blades inside until it is clean. Finally, install the fan. Fan maintenance cycle: about one month.

Thirdly,Maintenance of Transmission System

The laser metal cutting machine will generate smoke and dust during the long-term cutting process, and the fine smoke and dust will enter the equipment through the dust cover and adhere to the rack of the guide rail. If a large amount of dust is deposite on the surface of the guide rail and linear shaft for a long time, it will have a great impact on the processing accuracy of the equipment, and will form pits on the surface of the linear shaft of the guide rail, thereby shortening the service life of the equipment. Therefore, in order to make the equipment work normally and steadily and ensure the processing quality of the products, it is necessary to do a good job of daily maintenance of the guide rail and linear axis, and regular dust removal and cleaning.

Furthermore,Working Environment

The environment of the workshop should be kept dry and well ventilate. The ambient temperature should be between 4°C and 33°C. In summer, prevent condensation on the equipment, and prevent freezing of the laser equipment in winter. The fiber laser metal cutting machine should be far away from electrical equipment sensitive to electromagnetic interference to prevent the equipment from long-term electromagnetic interference. The interference of large power and strong vibration equipment can sometimes cause machine failure, such as large electric welding machines, giant electric mixers, and large power transmission and transformation equipment.

    Teklif Al

    Need Help?

    Fill out the form below and support will be available within the hour!