What’s the Techniques in the use of optical fiber laser cutting machine?
For an enterprise purchase intention of laser equipment.
Is of course in order to increase the economic benefit.
but according to the power of the laser cutting machine of different type. So corresponding cost is not a often in the process will ignore some problems.
such as machine maintenance and so on.
So In order to avoid too eager for quick success and instant benefits, and at the same time, in order to improve efficiency.
This paper focuses on five typical skills of using fiber laser cutting machine in the process of application, hoping to helpful in the process of customer use.
The first point :
To pay attention for influence of environmental factors. and the dust. So dirt in the machine are sucked out once a week by vacuum cleaner.
All electric cabinet should be strictly dustproof.
The loss of the goods. The double focus laser cutting head is a fragile item on the laser cutting machine.
Then it will cause damage to the laser cutting head for a long time, which need notice by customers and avoid accidents.
Error. The straightness of the track of the optical fiber laser cutting machine and the perpendicularity of the machine check regularly
and it is not normal and timely to maintain and debug.
The main purpose of this is to reduce the effect of the error on the quality of the cutting, which is a very important point.
Mechanical maintenance. The guide rails of fiber laser cutting machine must clean regularly and exclude dust and other debris.
Ensure that the rack is clean regularly, add lubricating oil, ensure lubrication without impurities. Guide to regular cleaning and lubricating oil.
There is always the motor cleaning and lubricating oil and the machine will move in a better place.
Cutting more accurate, the quality of the products and will cut out to improve. In order to ensure the normal operation of the machine and the quality of the workpiece can guarantee and the efficiency is improved.
Fifth points :
Often check the fiber laser cutting machine steel strip and sure to ensure tightened.
Steel strip seems small things and the problem is very serious needs seriously treated.
In order to avoid accidents that a good habit of operation and maintenance should formed.
Contact name: Juicy Jin