Posts

why choose IPG fiber laser cutting machine-Jill

why choose IPG fiber laser cutting machine-Jill

 

Firstly,IPG laser source

IPG is Germany brand.It is made in China,Russia,USA.We send it by random.

Advantage of IPG
1)High photoelectric conversion rate
Can reach 45%, other brands are only about 25%
2)German brand ,good quality,laser power weakened slower than other brand.
3)High market share, a certain degree of reaction to brand strength and quality
4) low failure rate, only 3%
5)light power can be seen in real time
6)after-sale service spots all over the world, problems can be resolved in time

Secondly,nLIGHT laser source

nLIGHT , Raycus, IPG , are three popular band laser source in market,
Raycus and IPG are for normal metal, such as carbon steel, stainless steel , galvanized sheet .etc, not high reflective metal.
But some clients want to cut some high reflective metals, such as aluminium, copper, brass, etc.
If use Raycus or IPG to cut high reflective metal, laser source will alarm, and do harm to laser source, because laser beam will return back to laser generator.

But nLIGHT laser source, it has Back-reflection isolation, so it can not only cut carbon steel, stainless steel , galvanized sheet .etc, not high reflective metal, and high reflective metals, such as aluminium, copper, brass, etc.

 

And also,we share the Cutting videos FYI.

brass cutting:

https://youtu.be/qaUN449oBys

https://youtu.be/JAGbBeFRcHg

Aluminum cutting:

https://youtu.be/3y8NhMjVDZ0

https://youtu.be/owI4wZvfuUs

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

fiber laser cutting machine software cutting system,how to choose-Jill

fiber laser cutting machine software cutting system

For China fiber laser cutting machine,there are many cutting system,here we introduce the most popular one.

1.For plate cutting

Now the most popular cutting sytem is Bochu Cypcut.

It also depends on the machine power.

If power is less than 1kw,it is Bochu Cypone,FSCUT1000.

 

 

 

When it is over 1kw,it is Bochu Cypcut,FSCUT2000.

 

 

 

If 8kw or over 8kw,it is Hypcut,FSCUT8000.

 

 

So,what file format does Cypcut and cypone support?

AI、DXF、PLT、Gerber、LXD (DXF、PLT most common)

 

2.For tube cutting

There are 2 kinds of machines.

1st,plate and pipe cutting machine.For this ,It is Cypcut FSCUT2000 &Cyptube FSCUT3000S.

 

 

 

2nd,pipe cutting machine.For this ,It is TubePro,FSCUT3000S.

 

 

 

So,what file format does it support?

Both of Cyptube and TubePro support IGS format.

 

3.FSCUT2000 whole set

 

 

 

 

 

 

4.Cypcut support language

Simplified Chinese, Traditional Chinese, Czech, German, English, Spanish, French, Italian, Japanese, Korean, Dutch, Russian, Portuguese.

 

 

 

 

 

 

 

 

 

5.Height controller

It can calibrate if the metal sheet flat or not, adjust it by control the cutting head up and down, sometimes, this controller is not appear in outside, just in the software.

 

 

 

 

 

For more information,contact us and let us know.

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

Fiber laser cutting machine focus:Charry

Fiber laser cutting machine focus

Fiber laser cutting machine focus.

When the laser cutting machine performs the cutting operation, there are some differences in the cutting quality of the focus position.

Therefore,it is very important to adjust the focus position of the laser cutting machine reasonably.

When the focus of the laser cutter is in the best position, the slit is small and the mass cutting efficiency is the highest, which can achieve the best cutting effect.

Different cutting focus positions correspond to different cutting surface roughness. And the relative position of the cutting focus and the cutting plate decide the cutting quality of the laser cutting machine.

1. The cutting focus is on the upper part of the workpiece surface
In this mode, the cutting airflow needs to be small, the temperature is sufficient, and the cutting and perforation time is relatively long. This mode is usually for cutting carbon steel sheets.

2. The cutting focus is on the lower surface of the work piece.
Mainly because the cutting plate needs a large cutting width, otherwise the auxiliary gas from the nozzle is prone to insufficient flow and the cutting slag cannot fall down. The disadvantage is that the cutting surface is rough and not suitable for high precision cutting.
This mode is usually for cutting stainless steel sheets

3. Cutting the focus on the surface of the workpiece
The smoothness of the upper and lower surfaces is different. It is commonly used when cutting workpieces such as SPC, SPH, and SS41.

When our engineer go to our factory for training,they will help you to adjust all of materials parameters.

And save on computer,do not worry about it.

If you want to know more about fiber laser cutting machine,contact us.

Whatsapp:+8618253165863

How To Reduce Loss Of Fiber Laser Cutting Machine–Anne

How To Reduce Loss Of Fiber Laser Cutting Machine

When using a fiber laser cutting machine, in the case of guaranteeing its cutting quality, we will try our best to reduce its loss to save costs. Is there any way to reduce its loss?

Before turn on the fiber laser cutting machine, you need to push the beam forward and backward, and the car moves left and right , both without abnormal noise then it can open the energize. After one day’s work, clean the waste and debris in the machine  to avoid damage to its motion system. Clean up its moving parts so that it can maintain excellent working conditions.

The specific methods are as follows

1. A small amount of lubricant should be injected into the screw, including the laser tube support and the screw on the first mirror, which can be disassembled and assembled easily during maintenance.

2. NOTE: Do not add lubricants to synchronous belts, tow chains, trachea, motors, sensors and lenses, wires.

3. No items should be placed inside the machine to avoid unnecessary damage to the machine.

4.Using cotton cloth clean dust on metal oil tankers, metal shafts, sliders and linear guides, then add lubricant and perform reciprocating motion.

Fiber laser cutting machine is specially used to cut metal materials. Its laser beam can up to diameter of 0.1 mm. Therefore, fiber laser cutter have high precision. It not only improve the technical content of sheet metal processing but also increase the profit margin. Therefore, everyone must be careful when operating a fiber laser cutting machine, so that the equipment can serve everyone better.

Hope these information is helpful for you.If you have any questions about machine,please contact us.

Sales Manage:Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

 

How To Adjust Cutting Focus Of Laser Cutting Machine-Anne

How To Adjust Cutting Focus Of Laser Cutting Machine

One of the advantages of fiber laser cutting machine is high energy density of the beam. During cutting, focus spot will be very small, and the cutting slits is narrow.

The position of the focus is different, and the applicable conditions are different.

The following are three different situations.

1.Cutting focus on the surface of workpiece.

The name is focal length. In this mode, the smoothness of the top and bottom surfaces of the workpiece is usually different. Generally, the cutting surface close to the focus is relatively smooth, while the lower surface away from the cutting focus appears rough. This mode should be based on the process requirements in the actual application.

2. Cutting focus on the workpiece.

It is also called negative focal length. The cutting point is positioned above the cutting material. This method is mainly suitable for cutting materials with high thickness. But the disadvantage of this method is that the cutting surface is rough and not practical for high precision cutting.

3. Cutting focus inside the workpiece.

It is also called positive focal length. Since the focus is inside the material,  the cutting airflow is large, the temperature is high, and the cutting time is slightly longer. When the workpiece you need to cut is stainless steel or aluminum steel, it is suitable to adopt this mode.

When using fiber laser cutting machine, operators can adjust flexibly according to actual needs.

If you have any problem, please feel free contact us.

 

Sales Manager:Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

The Maintenance Of The Laser Marking Machine-Anne

The Maintenance Of  The Laser Marking Machine

For most customers worried how to maintenance of the laser marking machine.

Actually laser marking machine is maintenance free,no consumable part and easy to operate.

However ,here are some point need to noted:

  1. Optical lens clean

Because of working environment, optical lens may have pollution after use a period of time,

if not timely maintenance, the dust will corrode lens coating,the lens that coating damage can’t reflected light and through laser,oppositely it will absorb laser heat, affecting marking effect, and easy to cause crack lens.When cleaning the lens use lens paper or absorbent cotton put in medical alcohol rotary cleaning along the central to the brink of the lens(note:not with coarse material wipe or touch lenses)

 

① Lens should wipe gently, do not damage the surface coating

② Wipe process should be gentle with, to prevent the decline

③ Wipe lens, not back and forth wipe, not brush with rough materials, because the lens with a metal film, the film will lead to a damage of laser energy attenuation.

④ With absorbent cotton wipe  only use once. Check don’t leave cotton thread or other residue after wipe, stay on the alcohol completely volatile before starting up.

2.Notes

laser marking machineOur aim is constantly to improve and perfect our products, so there maybe exist a little difference between the manual and the machine you are using.If there are changes to be made, we will use the attached way to inform.Any question please contact with the after-sale service department, we will meet your requirements.

laser marking machineDue to the input/output terminals, laser power supply, sound and light power supply, control power supply,etc.are may be charged, you must be careful in use, avoid electrical shock. Pay attention to personal safety!

laser marking machineOptical fiber laser marking machine belong to the fourth class laser products, please wear protective glasses when using, the technical workers without training are strictly forbidden to open and use the equipment!

 

If  you have any confused about laser marking machine,welcome to contact us.

 

Sales Manager

Anne Zhang

Mob/whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

How to prevent dewing of fiber laser cutter generator-Anne

How to prevent dewing of fiber laser cutter generator

SO In hot summer, fiber laser cutter generator is easy to dew because of  the frequent rainfall. Under this circumstances,its performance will reduce. Customers must pay attention to preventing this phenomenon when using fiber laser cutter.

So what does dewing mean?

Dewing is a physical phenomenon.It will appear when the temperature of object surface is lower than its surroundings.

There are a few ways to avoid dewing.

※If the fiber laser cutter generator is installed in an environment without air conditioning,configuring a separate air-conditioned room.

※If the fiber laser cutter generator  install in an environment with air conditioning, keeping refrigeration temperature of the air conditioning is consistent with the cooling water temperature.

※Add an evaporator between the gas source and the processing head, keep the gas temperature close to the ambient temperature.

Although dewing cannot avoid ,we must remind everyone to minimize the temperature difference between the operating environment and the cooling temperature.

We,XT Laser ,are field laser machine more than 14 years. We are dedicated to providing good after-sales service to customers.

If you have any problems,welcome to contact us. We will try our best to help you.

 

Sales Manager

Anne Zhang

so Mob/whatsapp:+8615098735595;

Skype:amyzhang1321;

so Email:xintian121@xtlaser.com

Benefits And Competitive Advantages Of Fiber Laser Cutting Equipment-Anne

Benefits and competitive advantages of fiber laser cutting equipment

With the continuous development of technology, science and technology to promote the people’s life has become a major factor in development.Whatever the industry, must rely on strong in technology continue to depend on, fiber laser cutting machine industry is no exception.Fiber laser cutting machine is the product of a high-tech era, it can say to produce fiber laser cutting machine is both selection era,but also the inevitable development of the times.

You can not polite to say, to produce fiber laser cutting machine is a mechanical industry milestone progress. Here XT laser with you to understand a little laser cutting machine.

Introduction of fiber laser cutting machine

Refers to the so-called fiber laser cutting machine is a mechanical cutting technology, through his mechanical surface treatment, so as to achieve the effect of cutting or engraving, which allows a workpiece to melt and evaporate quickly.Now the market is not limiting laser cutting machine cutting design patterns, and existing technology can easily do the cutting incision smooth, time-saving effect of a large number of publishing, it is precisely because of this, laser cutting can only be played instead of the traditional cutting the role of technology.

Advantages of fiber laser cutting machine

1, high precision laser cutting machine can apply to different products, different areas, such as kitchen utensils, automobile, machinery, hardware, medical and other industries, especially in some of the relatively high technical requirements of the industry, laser cutting machine Requirements are particularly high.It can be of different products to fine cut, characterization, thereby making the production of a good product.

2, laser cutting machine cutting data quickly, the traditional cutting machine is slow, it will waste a lot of working time, the existing laser cutting machine, you can avoid this problem well, and even its speed reaches the traditional cutting machine 100 times.

3, laser cutting machine high cost.Compared with similar products, laser cutting machine very competitively priced, or even only 60% of similar products, which is a lot laser cutting machine manufacturers to choose the main reason.so

4, the use of low cost laser cutting machine, for enterprises to control business costs is critical.

If there are no production costs in this ring strict control, companies will increase production costs and reduce profits.so

According to statistics, the current price of production laser cutting machine mostly only about 18 yuan per hour,

while the traditional cutting machine or a similar product cost can reach 200 yuan an hour. The gap between the very great.so

5, post-laser cutting machine maintenance costs, low maintenance costs. Laser cutting machine easily damaged, durable products.so

You know, the maintenance of machinery products are very expensive, and laser cutting machine in this respect is a big advantage.so

Fiber laser cutting machine market competitive advantage:

Laser cutting machine a strong product advantages allow to continue to grow in the machinery industry, and even become the main production technology Although laser cutting machine market is excellent, but the development if its technology is not up to date, and inevitably will be Times eliminated.

So many experts say, laser cutting machine in order to continue stable development continue to improve production technology, and tap new technology is the most critical thing, only the science and technology as the first element, as the core productivity to remain unbeaten in the industry land.

If you have any questions,please let us know it .

Sales manager:Anne Zhang

Whatsapp/mob:+8615098735595

Skype:amyzhang1231

Email:xintian121@xtlaser.com

Warmly welcome to visit XT LASER

Answers To The Common Problems Of Laser Cutting Machine-Anne

 Answers To The Common Problems Of  Laser Cutting Machine

Here, you can find solutions to the common problems of laser cutting machine and laser cutting process.

What is the working principle of laser cutting machine?

Laser cutting machine is used to illuminate the workpiece with high power density laser beam,to make the workpiece rapidly melt, vaporize, abate or reach the point of ignition,

at the same time, the molten material is blown out by the high-speed airflow which is coaxial with the beam to the workpiece,

through moving light spot position by the CNC mechanical system to cut workpiece.

Which factors could effect the precision of laser cutting machine?

The equipment itself can affect the laser cutting accuracy, some factors

such as mechanical system precision, table vibration level, laser beam quality, auxiliary gas, nozzle etc, some factors are inherent material factors,

such as the physical and chemical properties of materials , the reflectivity of the material, etc.

Other factors like  adjust parameters based on the specific processing object and the user’s quality requirements,

such as output power, focal position, cutting speed, auxiliary gas etc.

How to find the focal position of laser cutting machine ?

Laser power density has a great influence on the cutting speed,

so the selection of the focal position is particularly important.

The spot size of the laser beam is proportional to the length of the lens.

There are three simple ways to find the cutting focus position in the industrial files:

1.Pulse method: Let laser beam print on a plastic sheet,moving the laser head from top to bottom,checking all holes and the smallest diameter is the focus.
2.Slant plate method: Using a slant plate under the vertical axis, moving it horizontally and looking for the laser beam at the minimum focus.
3.Blue Spark: Remove the nozzle, blow the air, pulse on stainless steel plate, move the laser head from top to bottom, until find the blue spark as the focus.

At present, many manufacturers’ machines have automatic focus.

Automatic focus can significantly improve the laser cutting machine’ efficiency, reduce  piercing time on thick plate

So the laser cutting machine can adjust automatically to find the focus position based on different materials and thickness.

What’s the application range of laser cutting machines?

Laser cutting machine has high speed, narrow width, good cutting quality, small heat affecting area and good flexible processing,

so it is widely apply for  automobile manufacturing, kitchen industry, sheet metal processing, advertising industry, machinery manufacturing,

cabinet processing, elevator manufacturing, fitness equipment and other industries.

 

laser cutting machine

Laser Cutting Machine Technology How To Deal With Burrs?-Anne

Laser Cutting Machine Technology How To Deal With Burrs?

Fiber Laser cutting machine processing sheet metal burr what is the reason?Here we give you a simple analysis.

The working principle of fiber laser cutting machine, analysis of the resulting burr causes and solutions.

First, the focus of the beam position deviation.–fiber-laser-cutting-machine

Solution:adjust the focus position, according to its offset position to adjust

 

Second, the output power of the machine is not enough.–fiber-laser-cutting-machine

Check whether the fiber laser cutting machine works properly. If not normal, it needs to repaire and maintain machine in time. If normal, check whether the output value is correct or not.

 

Three, the cutting speed of the fiber laser cutting machine is too slow–fiber-laser-cutting-machine

Solution: timely adjust and improve the speed of wire cutting

 

Four, the purity of the auxiliary gas of the fiber laser cutting machine is not enough.–fiber-laser-cutting-machine

Solution: improve the purity of the auxiliary gas

 

Five, the cutting point of the laser beam of the cutting machine has shifted.–fiber-laser-cutting-machine

Solution: focus debugging, timely adjustment

 

Six, laser cutting machine operation time is too long to produce instability–fiber-laser-cutting-machine

Solution: close the machine, restart and let the machine rest

 

The main reason of burr in laser cutting machine.when the laser cutting machine is working the workpiece, the laser beam irradiates the high energy produced on the workpiece surface,

so that the workpiece surface vaporization rapidly, and evaporation, to achieve the purpose of cutting. But there is a core device, we must attach importance to auxiliary gas.

The auxiliary gas is when the workpiece surface irradiation after gasification, blew the slag on the surface of workpiece,If the auxiliary gas is not used, the slag will be cooled and the burr will be formed on the cutting surface.

This is the main reason for burr formation

Another reason is the quality of the equipment itself, as well as the parameter setting factors, all customers after the purchase of laser cutting machine, must be professional operators debugging equipment.

So it’s important to choose a quality factory with good after-sale service .

Solution to burrs in sheet metal processing by laser cutting machine;

1.must be equipped with air compressor, the use of auxiliary gas to cut.

2.Find a professional operator debug laser cutting machine parameters until normal.