Posts

Precautions for using laser cutting machine-Julia

Precautions for using laser cutting machine

Nowadays, the use of fiber laser cutting machine is very wide. But there are many precautions por using fiber laser cutting machine.

Let’s take a look at the things that should be paid attention to during use.

  • 1.The dual focus laser head is a vulnerable item on the laser cutting machine. If used for a long time. Will cause damage to the laser cutting head.

  • 2.Use a vacuum cleaner to remove dust from the machine once a week. All electrical cabinets should be closed and dustproof.
  • 3.Check the straightness of the laser cutting machine track and the verticality of the machine every six months. If it is found to be abnormal, it shall be maintained and debugged in time. If you don’t do this, the cutting effect of the machine will decrease, the error will increase, and the cutting quality will be affected.
  • 4.The guide rails of the fiber laser cutting machine should be cleaned frequently. Eliminate dust and other debris to ensure that the machine is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. In addition, the motor also needs to be cleaned and lubricated frequently. In this way, the machine will run better, thereby improving the quality of the cut.
  • 5.Always check the steel belt of the cutting machine to ensure that it is in a tight state, otherwise it will cause casualties in use.

Fiber laser cutting machines need regular maintenance and inspections. If there is deformation or other forms during cutting, it means that the cutting head is damaged and needs to be replaced in time. If it is not replaced, it will affect the cutting quality and increase the cost. Some products may require secondary processing.

The above is precautions for using laser cutting machine.The main products of XT laser are laser cutting machine, laser marking machine, laser welding machine and so on. It can be used in sheet metal processing, chassis cabinets and other industries. Contact us to get more machine information.