Posts

How To Improve Laser Marking Efficiency-Wendy

How To Improve Laser Marking Efficiency

To improve laser marking efficiency, there are some methods to achieve it. And to improve the efficiency is very important for some customers. I will talk about how to improve it by this chapter.

Fiber laser marking machine is a new marking craft without pollution and energy consumption. To bring higher production efficiency and create higher value to the enterprise is also the main goal of this kind of machine. To achieve how can speed it up, we have been exploring all the time. But how to improve the marking speed of fiber laser marking machine?

Factors

The main influence factors of fiber laser marking machine are divided into internal factors and work piece processing factors.

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power. We should be pay attention to internal factors when selecting and selecting the early models. And we should also follow the opinions of laser engineers to select and purchase the models.

Another factor that we need to pay attention to during customer processing is mainly marking density, marking width, marking depth and laser spot size.
Under the conditions of the same width, the same light spot and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

Marking Format

Because the deflection area of the galvanometer for large-format marking increases, the marking speed of large-format is slower than that of small-format marking.

Marking Depth

To achieve marking with depth, we must let the machine repeat over and over again, the laser move once, will left a 0.01mm depth on surface.  So for example, you want mark on some metal with 1mm depth, then the laser must move 100 times.

So how to improve it?

To select a small-amplitude field mirror within a suitable range. And controling the density during marking and select a small density within the range that can meet the requirements. The most important is to ensure the daily maintenance of the machine and keep it in good condition.

Email : xintian112@xtlaser.com

fiber laser metal marking engraving machine-Wendy

fiber laser metal marking engraving machine

Plastic is one of the most common material in our life. It have so wide application nearly in all industry fields, business fields and other daily supplies. There is many people want to use fiber laser marking machine do marking process on these plastic. We know it could working on all kinds of metal material. But plastic is different with metals. Some plastic material is okay, some plastic is not possible to do mark with fiber laser marking machine. Usually it need use UV laser marking machine.

So it make many people confused. What kind of plastic we can mark? and what kind of plastic need UV laser?

  • ABS plastic

ABS is one of the most common plastic material in our life. Such as switch, net connect port etc., most of them is ABS plastic. Most of them could be marked with fiber laser marking machine. Only few of them need use other type laser marking machine.

So if you want to do ABS plastic marking, that’s better send some samples to suppliers and ask them take test for you.

ABS plastic panel

 

  •  PVC plastic

PVC is also one of common material in our life, usually we use it on water pipe, control panel and electric case. With fiber laser marking machine, we can make beautiful black color on the surface. but the marking won’t damage material surface as it is very light.

PVC plastic battery case

 

  • PU plastic

PU plastic usually seems very smooth. In our life, such as keys, soft cover etc. many of them is PU material.

PU fiber laser marking machine

fiber laser marking machine for PU

MOPA fiber laser marking machine

For plastic laser marking, mopa fiber laser marking machine have wide application than ordinary fiber laser marking. Mopa machine’s pulse could be adjusted so that it is more suitable for plastic marking. If you need do plastic laser marking, pls think about mopa laser marking machine firstly. Although its price is higher than ordinary machine. but its marking performance will be much more better.

If you want to learn more about plastic laser marking machine, we can talk more.

Wendy Ning

Email: xintian112@xtlaser.com

Mobile&whatsapp: 0086 13176671529

Skype: XT Wendy Ning

Fiber laser marker two commen working effect-Wendy

Fiber laser marker two commen working effect. Metal Fiber laser marking machine have more and more application now. Especially on metal product, such as stainless steel, carbon steel, aluminum, brass etc.

In order to meet different process demand, metal fiber laser engraving machine also many different application, including color marking, deep engraving, rotary marking etc.

Color Laser Marking

Metal Fiber laser engraving machine can do simple color on stainless steel, such as red, blue, black, white, pink etc. Also it can do black color on Ti, and mopa fiber laser marking machine can do black on anodized aluminum. But for other material, we can only do ordinary marking one white color. It is not possible to do more color.

how to choose mopa fiber laser marking machine

Deep engraving

Also there is many customers use fiber laser engraving machine on deep engraving. The metal is more soft, it is more easy to do deep engraving.

For aluminum and brass, it is easy to do depth. With 30w fiber laser engraving machine we can make more than 1mm depth. Due to carbon steel and stainless steel is very hard, it will take much more long time when we need do deep engraving. Usually 0.5mm is ok for 30w laser.

When we do deep engraving, we need copy two layer. The first layer is low speed and high power so that we can strip the metal material. The second layer is high speed with low power so that we can clean the small slag when do deep engraving.

Due to deep engraving need break the surface of material, so the engraving surface will be rust after some time. So only for some metal parts or mold, people will do deep engraving. Near no people do it on stainless steel.

deep laser engraving

Fiber laser marking machine also have many other application such as jewelry cutting, black marking etc. We will introduce more common application in the future.

Wendy Ning

Email: xintian112@xtlaser.com

Whatsapp&cell: 0086 13176671529

Skype: XT Wendy Ning

Methods for Improve Laser Marking Efficiency—Tony

Methods for Improve Laser Marking Efficiency

To improve laser marking efficiency, there are some methods to achieve it. And to improve the efficiency is very important for some customers. I will talk about how to improve it by this chapter.

Fiber laser marking machine is a new marking craft without pollution and energy consumption. To bring higher production efficiency and create higher value to the enterprise is also the main goal of this kind of machine. To achieve how can speed it up, we have been exploring all the time. But how to improve the marking speed of fiber laser marking machine?

Factors

The main influence factors of fiber laser marking machine are divided into internal factors and work piece processing factors.

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power. We should be pay attention to internal factors when selecting and selecting the early models. And we should also follow the opinions of laser engineers to select and purchase the models.

Another factor that we need to pay attention to during customer processing is mainly marking density, marking width, marking depth and laser spot size.
Under the conditions of the same width, the same light spot and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

Marking Format

Because the deflection area of the galvanometer for large-format marking increases, the marking speed of large-format is slower than that of small-format marking.

Marking Depth

To achieve marking with depth, we must let the machine repeat over and over again, the laser move once, will left a 0.01mm depth on surface.  So for example, you want mark on some metal with 1mm depth, then the laser must move 100 times.

So how to improve it?

To select a small-amplitude field mirror within a suitable range. And controling the density during marking and select a small density within the range that can meet the requirements. The most important is to ensure the daily maintenance of the machine and keep it in good condition.

 

Email : xintian124@xtlaser.com

 

Focus-Point-is-Easy-to-Find-on-Fiber-Laser-Marker-Jennifer

Many of our clients, who contacts with fiber-laser-marking-machine, will consider about the problem of adjusting the focus point.

In fiber-laser-metal-marking process, the traditional way to adjust the focus point, is to use the handheld wheel. Currently, in order to make more convenient for the operation of metal marker, the outside red indicator is the good helper for metal-engraving-machine.

As you may know that in the metal-printing-machine, there is one inside red indicator inside of the whole metal printer, now one outside red indicator is installed on the mini & desktop fiber laser marker. During the metal engraving process, when these two red points meet together into one point, so here is the strongest laser light, so here is the focus point.

You can see the following pictures directly:

Our machines have been sent to many places in the global world. Especially for the clients, who used the marker firstly, they can also operate the jewelry laser engraving machine easily by following the videos and user manuals we sent.

 

 

 

 

 

 

Our Fiber Marking Machine has an amazing performance for the cost. It is widely used on metals and non-metals, and it can engrave both letters and high-quality images onto your products with speed (7,000mm/s) and accuracy (0.001mm).

Hoping the above can be helpful for u.

Any question, free to leave message here.

Contact person: Jennifer Sun
Email address: lasermachine01@xtlaser.com
Whatsapp & Wechat: 0086 15169105376
Skype: xtlaser01@gmail.com