Setting marking parameters in fiber laser marking machine software
In marking metal and plastic,There is a setting parameter range for reference to test in the fiber laser marking machine software .
Speed 100-2000 adjustable,Power 30-80 adjustable,Frequency 5-30.
Depends on different materials and the marking effects you want so for a new operator may need conduct dozens of trials to know the ideal marking parameters for each material and even some experienced engineers have to try several times.
Here have a brief introduction about laser marking frequency,power,speed and the hatch function .
1.two settings for fiber laser marking machine software
1.) In laser marking machine,Marking frequency stands for the times of laser pulse per unit time.
It is easy to understand.
For example, When the value of marking frequency is high, the laser spot is dense.
On the contrary if the marking frequency value is low then the laser spot is parse.
Although we cannot see the laser spot by the naked eye,we can see it when we put the marking workpiece under the electron microscope.
The continuous line we see by eyes turns out that is composing by many laser spots.
The high value we set at marking frequency,the denser laser spot we get and more smoothness we will get on the marking workpiece.
2.) Marking speed refers to the moving speed of the laser.
Here this speed is the speed that can be adjusted in the parameters for marking.
The overall marking time is not only affected by marking speed,but also by the marking depth, marking area and other factors.
The higher speed you set,The faster marking speed you get.
Fast marking speed means less laser hitting times in the same marking place.
Slow speed is more conducive to deep marking .
But it does not mean the slower speed you set, the better depth you will get.
It also depends on the different materials and other relative parameters you set at.