Learn how to adjust fiber laser cutting machine focusing-Anne

Learn how to adjust fiber laser cutting machine focusing

For now,more and more customers using laser cutting machine.

Today XT LASER will share with you how to adjust fiber laser cutting machine focusing:

1. Testing cut, observe cutting section to judge if the focus point is too big or small. Slag (too big), Grain (to small).
2. Turn on the focal point control panel before cutting head to do manual focal point adjust.
3. When focal point data is 0, turn the focusing wheel to the left, then do cutting test.
4. When the focal point data is too small, there is slag at the rough bottom of the surface of the cutting sample (the focus is too small to cut through).
5. When the focal point data is +5 or bigger, turn the focusing wheel to the right, then do cutting test.
6. Cutting surface has obvious pattern on when the focal point data is too large.
7. After cutting test, observe the cutting surface and adjust the focusing wheel till the right data.
8. When the focal point is at the right place, the surface of the sample is smooth and without hanging slag.
9. Finish the testing.
10. Focusing adjust for carbon steel ( the same as manual laser cutting head focusing)
12. Focusing adjusting for stainless steel (the same as manual laser cutting head focusing)

Sales Manager:Anne Zhang

Mob.whatsapp:+8615098735595

Skype:amyzhang1321

Email:xintian121@xtlaser.com

If you have any questions,welcome to contact to XT LASER.

    Obtenha uma cotação

    Precisa de ajuda?

    Preencha o formulário abaixo e o suporte estará disponível dentro de uma hora!