New fiber laser cutting machine: Charry
New fiber laser cutting machine
New fiber laser cutting machine
As you known,XTLASER is the symbol of quality in the same price level.The quality is the most important for customers and engineers.
Also we need pay attention on machine look.So we make our best to customers,quality and appearance are important to attract a serious customer.
As we talked,we use the original IPG laser source and Raycus. Every laser source with a testing report,and the S/N inside it.
Second.The second important part is laser cutting head.We use Raytools,Swiss brand,its easy to adjust the focus and failure rate is lower.For now,Raytools made one customized look to us.
Thirdly.The third part is the machine bed.
Some suppliers maybe told you,its not important.But according to our testing and customers feedback,thats a serious problem.If the machine bed is lighter or use some bad structure,finally the whole machine using time will be reduced.
We use the thick plate welding machine.we have removed the internal stress of the metal after the welding of the machine bed.Cause the machine bed has been on high temperature quenching.(cause some suppliers use the CNC machine bed,do not with this step.So the machine bed will be not stable for the fiber laser cutting)
This kind of machine bed has strongly reasonable structure. it is produced by relief annealing, so the whole structure is very firm and hard to be deformed.
Finally, Height controller
It can calibrate if the metal sheet flat or not, adjust it by control the cutting head up and down.
At the same time,The slits are smooth and beautiful, and no post-processing is required.
More details just let me know.