[av_textblock size=” font_color=” color=”]
Mopa laser marking machine for color marking
Now more and more customers show great interest to the mopa laser marking machine.
Different with the common laser marking machine, one of the most characteristics of this type machine lies that it could mark color on stainless steel.
Therefore, many customers ask this type machine.
Marking color on the stainless steel may make the products looks more beautiful.
Hence this passage will give some introduction to the mopa laser marking machine.
1.The classification of the mopa laser marking machine
For the mopa laser marking machine, there are totally two types, called M1 and M6.
Both of them are used for color marking.
The Pulse width range for the M6 is bigger than the M1, so the M6 price is a little higher than the m1.
Besides, it would be easier to mark color by the m6 than the m1.
That is also related with the pulse width.
For the M6 type, its color range will be wider than the M1, for example, the Grey color , dark color and etc.
Under the same situation of the color marking area, the marking speed of the m6 mopa laser marking machine is quicker than the m1.
2.The specification of the mopa laser marking machine
According to our engineer testing, the 175*175 working area lens is the most suitable for the color marking.
Equipping with this working area lens could make the marking outcome be excellent.
|Laser parameters||optical maser||MOPA Fiber laser|
|Average output power||>20W|
|Modulation frequency range||20kHz~80kHz|
|Galvo parameters||Maximum speed||7000mm/s|
|Optical output characteristics||Marking range||175*175mm (with standard)|
|Minimum line width||0.01mm|
|Minimum height of characters||0.2mm|
|Cooling system||Cooling way||Air cooling|
|System properties||Laser power supply||0.5KW/AC220V/50Hz|
|Manual working table stroke||Movements itinerary 285 mm (desktop type)|
|Environmental requirements||0 ~ 35 ° C, 90% or humidity|
We usually met with the customer who ask both deep engraving and color marking requirements.
In this situation, we usually advise the customer buy the 30w Mopa with M1/M6 machine.
And then we will send one 100*100 lens for deep engraving.
When customer want to do deep engraving work, just changing the lens.
It is convenient very much!
[av_contact email=’email@example.com’ title=’Send us mail’ button=’Submit’ on_send=” sent=’Your message has been sent!’ link=’manually,http://’ subject=” autorespond=” captcha=” form_align=” color=”]
[av_contact_field label=’Name’ type=’text’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’E-Mail’ type=’text’ check=’is_email’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’Subject’ type=’text’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]
[av_contact_field label=’Message’ type=’textarea’ check=’is_empty’ options=” multi_select=” width=”][/av_contact_field]