Different metal cutting solution – Alex
There is so many different metal cutting equipment in the market. So it may let us confused when choice suitable machine. In this case, how can choose suitable laser cutting equipment or other cutting equipment?
1. Fine plasma cutting
Precision plasma cutting most suitable 0.45 ~ 50mm thick carbon steel, stainless steel and aluminum as well as within the thickness of 160mm. But it is not belong to laser cutting equipment.
(1) the length of the cutting unit costs in part or 6.35 ~ 50mm thick carbon steel with respect to the other process is the lowest.
(2) ease of use and software equipped with the latest CNC, plasma is very easy to use. Because professional process parameters have been built in the nesting software, so the operator does not experience requirements.
(3) productivity thickness greater than 6.35mm, cutting speed of the laser. When the thickness is less than 50mm, cutting speed in flames. Plasma cutting technology is the fastest of all, efficient.
(4) cutting precision steel cutting element tolerance ± (0.38 ~ 0.5) mm. For less than the thickness (9.5mm) sheet, the slope of the 2o ~ 3o. For thicker than 12.7mm thick plate, the slope within 1o.
(5) edge quality and metallurgical properties of the heat-affected zone is very small, typically <0.25mm. Section good weldability, smooth dross.
(6) Maintenance requirements are relatively simple.
2. Fiber laser cutting
Fiber laser metal cutting machine is the latest laser technology and laser cutting equipment. The use of solid-state laser generator is more efficient than conventional CO2 laser, and the wavelength of the fiber laser is suitable for conducting the valuables of fiber, compared to only use CO2 laser mirror reflection conducted more flexible, easier to maintain. By focusing the laser energy, the molten material being cut, the auxiliary gas blow off the molten metal. A 3kW fiber laser metal cutting equipment is equivalent to 4 ~ 5kW CO2 laser on the cutting ability and speed. Its cutting ability generally can achieve 19mm thick carbon steel.
(1) Unit cost of parts, or the length of the cut when the thickness is less than 6.35mm, most advantage of laser cutting costs. With the increase in thickness, the cutting speed significantly reduced, although the cutting quality and accuracy is very good, but the cost is higher than plasma cutting.
(2) ease of use and the latest plasma system is similar, when equipped with the latest CNC and software, laser cutting machine is also easy to use, since all settings are automatic.
(3) The productivity of the most efficient sheet, when the thickness is increased to 6.35mm, and plasma cutting flat.
(4) The best fiber laser cutting equipment precision cutting element within a tolerance of ± 0.25mm. Better than plasma cutting, water-jet cutting comparable. Slope within 1o.
(5) edge quality and metallurgical properties of the heat-affected zone is slightly smaller than plasma.
(6) maintenance requirements compared to the previous CO2 laser, dramatically reducing the difficulty of maintaining fiber laser.
3. The flame cutting
Flame metal cutting and more for 6.35 ~ 150 mm steel cutting cutting, when more than 50mm thick cutting speed than other processes.
(1) Unit cost of parts, or the length of the cutting gas quite a bit, cutting slow. The thicker steel plate, with respect to the plasma, which cut the cost advantage. Typically the cost per foot than plasma cutting height, more than 50mm thickness, the cost is relatively low.
(2) ease of CNC flame cutting machine tools require the operator a lot of experience in order to achieve the fastest cutting speed and best cutting quality.
(3) Productivity flame cutting due to the long warm-up time, cutting speed is slow, so low productivity.
(4) good precision cutting member operatives in the most suitable speed, altitude, the gas nozzle, the cutting element is about tolerance ± 0.76mm, pitch <1o.
(5) edge quality and metallurgical properties of the heat-affected zone flame cutting large cross-section and has a rough dross.
(6) Maintenance is relatively simple.
4. Waterjet Cutting
Compared to other metal cutting process, water jet two biggest advantage is that there is no heat affected zone and can cut almost any material. Also good water jet metal cutting accuracy. But the biggest disadvantage water jet cutting in its very slow.
(1) Unit cost of parts, or the length of the cut by water jet cutting speed is too slow, so cut the cost per part compared to other process is the highest.
(2) ease of use is similar to the latest plasma system, when equipped with the latest CNC and software, waterjet cutting machines are easy to use, the operator’s experience requirements are very low.
(3) productivity in carbon and stainless steel is very slow, can quickly cut aluminum.
(4) precision waterjet cutting member of accuracy is the best of all the cutting process, the cutting element is about tolerance of ± 0.13mm. Slope within 1o.
(5) edge quality and metallurgical properties has no effect on the metallurgical properties of the material being cut. Smooth section, cut quality and grit and cutting speed.
(6) Maintenance requirements are relatively simple.
Cell&whatsapp: 0086 18766152065