Learn more about fiber laser cutting machine software

Some customers worry about the machine software operation.So this article is about learn more about fiber laser cutting machine software.Hope it will be helpful to you.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We use Cypcut or Tubepro cutting software from FSCUT,they are a very profession in cutting softwares.

Firstly,for metal plate cutting,the software support format is DXF file,its same as CO2 machine and other CNC software.

Tube cutting need IGS or ZZX format,i think most customers use some CAD software to make designs,it also can export the IGS format.

Many customers said the function is similar like CAD,easy to operate.

Secondly,there are many basic functions,like nesting,array,drawings,scale,Micro Joint,Auto sort,etc.

Except these parts,then it is the cutting parameters settings.We should set the gas pressure,focus,cutting height,pierce,frequency,cutting speed for different materials and thickness.

Before shipping,engineers will test the machine and save parameters on your machine.And usually for fiber laser cutting machine,customers need engineers installation and training.So do not worry about it.

Thirdly,the software with the control handle,including the signal receiving device,you can leave the machine 5 meters away to operate the machine,no need worry about the safety.

On control handle,there are the functions to adjust the laser head ,the cutting position.

Like Zero,make the laser head back to Zero point.

Frame is to make sure the cutting position.

And control the laser head move back and forward.Blow the gas.

Start cutting,stop cutting,pause cutting.

Dry cut,no real cutting,to check Mechanical running,etc.

So no need to worry about the operation.Do not image a big problem for yourself.

Any questions,contact us.

Ariel Liu

Email:xintian122@xtlaser.com

whatsapp:0086 17866940010