Installation of water chillers for Fiber laser cutters-Ivy
Installation of water chillers for Fiber laser cutters
How to install the water chiller in fiber laser cutter?I just received a email form our client. Today we will talk about Installation of water chillers for Fiber laser cutters.
The water chiller is one of the essential parts of fiber laser cutting machine, It can cool the fiber laser cutter laser generator by water circulation, and control the temperature of the laser generator, so that the laser generator can keep working normally for a long time. When we install water chiller, we need to pay attention to the following points.
Firstly, open the water chiller package and check whether the machine is in good condition, installation personnel must have relevant professional knowledge.
Secondly, the equipment is properly grounded.
Thirdly, open the machine water inlet, add the cooling water. Only neutral and pure water can be used, no granular solids are allowed in the water, which may damage the cooling water system of the laser cutter.
Fouthly. To protect the circulating water pump.
In conclusion. Keep a certain distance from the laser cutting machine. Ensure that the air inlet and outlet channels of the chiller are smooth. Do not put foreign objects into the device.
Above all, these are the cautions for installing the laser steel cutter water chiller. Customers should pay attention to these points to keep the machine in good condition. If you want to get more knowledge of fiber laser cutter, do not hesitate to contact us.
If you still don’t understand that, it is ok. Don’t worry, we have online afer-sales, who can teach you how to use.