How to install the focusing mirror of laser cutting machine-Ariel | XTLASER

How to install the focusing mirror of laser cutting machine-Ariel

How to install the focusing mirror of laser cutting machine

After used the laser cutting machine focusing mirror  for a long time, if the film is dropped, dents, scratches, etc., the function of the laser device will  reduced. In order to function properly with the laser cutting machine, it is necessary to replace the new lens in time. So, how should we properly install the focusing mirror? The article is about how to install the focusing mirror of laser cutting machine?

Here is the method about installing the focusing mirror.

1. Place the protective film of the laser cutting machine focusing mirror in the palm of the hand, and the convex side of the lens is upward.

2, pick up the focus tube carefully placed in the lens of the hand, cover the entire lens

3, the left and right hands simultaneously rotate 180 degrees clockwise

4. After pressing the lens, tighten the pressure mirror nut with a small steel ruler.

5. Install the air jet cup on the focusing cylinder of the laser cutting machine.

 

Noticing things  about the focusing mirror.

1. The laser cutting machine lens faces up

2. No smudges or fingerprints are allowed on the mirror surface.

3. Gently shake, the lens is not loose.

 

If you have any other questions,pls feel free to contact me.

Ariel Liu
Email:xintian122@xtlaser.com
whatsapp:0086 17866940010