How to maintain fiber laser cutter – Damon
Maintain the fiber laser cutter
As the temperature gradually rises, many laser devices will generate heat during use, resulting in malfunctions. In order to avoid the occurrence of failures, XT laser will introduce some common knowledge of maintain fiber laser cutter.
● Avoid fogging
With the advent of summer, the temperature has increased significantly. And the humidity has increased, frequent rains and humid environments can easily cause condensation inside the laser. The laser and the cutting head are mostly controlled by separate water cooling. So we recommend that the user set the laser low temperature all the way to set the water temperature to about 26 degrees. And the cutting head and the fiber all the way to about 30 degrees (depending on the temperature and humidity value). Strictly observe the summer switch machine sequence.
Tips:
Hot and humid weather will cause the laser power supply and various parts of the laser equipment to appear wet or dew. It causes a variety of failures. And it seriously affects the normal production of users. The normal warranty wouldn’t cover the failure caused by improper maintenance due to the above reasons.
● Maintain the cooling system and cooling water
In summer, when the temperature increases, the working pressure of the cooling system of the laser cutting machine increases. We recommend you to check and maintain the fluorine pressure of the internal press of the cooler before the high temperature comes. Due to the higher temperature in summer, the rate of deterioration of the cooling water will also be accelerated. Customers are recommended to use Regularly distilled water or deionized water, regularly clean the scale of the water tank, replace the water and filter element (recommended that the summer replacement cycle should not exceed 15 days), to avoid the adhesion of scale in the laser and the pipeline to affect the cooling water flow and cause high-temperature alarm. Please operate under the professional guidance to clean the limescale.
● Guide rail maintenance
We should clean the guide rail frequently to remove dust. And other debris to ensure to lubricat the transmission part of the equipment and free of debris. Regular cleaning and lubricating oil can ensure that the machine can be accurately positioned to achieve more accurate cutting and improve product quality.
● Maintenance of control cabinet
Since the dust of the laser cutting machine is mainly metal powder, so we recommend periodically power off to clean the dust in the electrical cabinet of the laser cutting machine. And check the working status of the cooling fan.
● Fan cleaning
If we use the fan in the machine for a long time, it will accumulate a lot of solid dust in the fan. So make the fan generate a lot of noise, and it is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke is not smooth, we must clean the fan for a long service time.