How to deal with laser cutting machine smoke

How to deal with laser cutting machine smoke

Laser cutting is one of the most common metal cutting methods. It is highly efficient and easy to use, and is very common in factories. However, using a laser cutting machine to cut metal plates will definitely generate smoke and dust. After these tiny soot particles are produced, they will float in the air in large quantities, seriously reducing air quality and destroying the working environment. The high concentration of smoke and dust is also extremely harmful to the workers working in it, often causing serious diseases such as respiratory diseases. How to deal with the smoke generated by the laser cutting machine, what is the best and most effective way to deal with the smoke?
At present, the commonly used laser cutting dust removal methods are mainly divided into two types: dry and wet. The dry type is to add a set of laser cutting dust collection and purification equipment, and the wet type is to place the cutting process on the water to form a water bed cutting platform, which uses the power of the water flow to absorb the dust and purify it. After a comprehensive comparison of the two methods, the dry treatment method, especially the blowing and cutting fume purification system, is the most popular in the factory because it is the most convenient to install and the most convenient to use.

One side of the cutting fume purification system platform is also provided with a sliding suction duct. The sliding suction duct is provided with a suction port that can move with the cutting head, and the opposite side is also provided with a blowing port. When soot is generated, the wind from the blowing port blows the soot toward the suction port, thereby achieving a trapping effect with a small air volume and a high soot collection rate.

The collected cutting dust will be evenly transported to the dust removal host for filtering treatment. The host structure is the same as the welding dust centralized dust removal system. The installed filter cartridge will intercept dust larger than 0.3μm, thereby completing the purification process of cutting dust. This kind of blowing dust removal equipment has a processing efficiency of more than 90% for laser cutting dust, and the effect is very obvious. Because of its simple installation and low cost, it has become the most popular dust removal method for laser cutting.

XT LASER  has won an excellent reputation in the global market, domestic laser research institutes maintained long-term friendly cooperation.

Any inquiry, feel free to contact us:

Email: xintian131@xtlaser.com

Skype: XTlaser-Flora

Mobile/Whatsapp/Wechat:0086 13153030563

Web: www.xtlaser.com

Youtube Homepage:https://www.youtube.com/feed/my_videos