How to control cutting quality during laser cutting

How to control cutting quality during laser cutting

Metal laser cutting one of the most important advantages is that it can control the cutting quality very well.

However, if you blindly pursue speed and ignore the cutting quality, then the original value of laser cutting technology will be lost.

Similarly, for enterprises, the processing speed has increased, but if the cutting samples are shoddy, it will lead to a decline in product reputation,

fail to play its value on the client side, and revenue loss.

Everyone knows that the quality of laser cutting is closely related to speed, material, auxiliary gas, etc.

In addition to these factors, what other human-controllable factors in the actual production process affect the cutting quality?

1. Cutting design

Before cutting, carry out scientific and reasonable cutting design, and carefully review and correct the design drawings.

2. Cutting process

When cutting, the equipment operator should not only adjust the relevant parameters of the machine according to the material thickness and material,

but also pay close attention to the cutting quality of the sample, adjust and deal with the problem in time, and then perform batch cutting after the proof is OK.

3. Correctly adjust the focus position

Adjust the focus position according to the cutting material and thickness. Generally, thin carbon steel below 5mm is suitable for zero focal length,

and the focus is on the surface of the workpiece; aluminum, stainless steel and other workpieces use negative focal length, and the focus is below the surface of the workpiece;

for thick steel cutting Generally, a positive focal length is used, and the focus is on the surface of the workpiece.

 

If you are interested in our laser welding machine. Please free feel to contact us.

Email: xintian132@xtlaser.com

WhatsApp: 0086 15264852794

The website: www.xtlaser.com