High power Enclosed fiber laser cutter 2560GP-Jill | XTLASER

High power Enclosed fiber laser cutter 2560GP-Jill

High power Enclosed fiber laser cutter 2560GP-Jill

 

For highe power fiber laser cutter,most customers would like to choose enclosed type.

 

1,Enclosed type with double exchange table 2560GP

2,Cutting area optional: 2000x4000mm,2000x6000mm,2500x6000mm,2500x8000mm,etc,.

Machine videos: https://youtu.be/0_TrhcGqM3U

Cutting videos:

https://youtu.be/JL5TZDVvE1Y

https://youtu.be/VhghYFm0NvY

https://youtu.be/ntmy2DYbqHo

https://youtu.be/0PlWT-csLIo

https://youtu.be/VEnaVfgSNmE

 

3,Exchanging Platform Automatic Door

Firstly,we introduce the automatic door.

Exchanging Platform Automatic Door

When 2 table exchanges,the exchane table door will be up. And for the operator who are loading plate to the behind exchange table,they will notice exchange table working,and take care.
So it can protect operator from hurting.

 

And also,we introduce the automatic Exchanging Platform.
It adopts an up and down exchange platform, parallel shift;
The converter is responsible for controlling the exchanging motor;
The machine is able to finish the platform exchanging within 25s,greatly save loading and unloading time.

 

4,Dual Camera Monitor system.

Dual Camera Monitor system.

Dual camera,no blind area;
Watch the cutting process in real time;
Dual LCD display.

 

5,Fume extractor system

When you cut,there is smoke.We will offer 2 smoke fan free charge.Smoke fan will exhaust the smoke outside door.

If you don’t like this,you can also choose the fume extractor system.It can purify the smoke and you can use it indoor.

There are 2 port connection.One port for machine cover smoke purify.

One port connected with the machine body to purify the smoke inside.

 

6,Air compressor

when cut stainless steel and aluminum,you need the nitrogen gas.

When cut carbon steel,you need the oxygen.

Considering nitrogen is not cheap. So some customers would like to use the air compressor to cut.

And for high power machine,if you use air compressor to cut,the cutting speed will be much improved too.

We recommend 1.6Mpa.

 

More questions just let us know.
Jill from XT LASER
E: xintian143@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01