Handling tools reparation and operation in laser cutting machine unloading process-Tulsa

• After the equipment arrives, the unloading and transfer of the equipment should based on the equipment site installation instructions. Xintian Laser G series corresponding models to select auxiliary equipment, such as forklifts, cranes, and cranes. The use of cranes and overhead cranes only allowed to place the hoisting label. Which on the hoisting ring position on the hoisting equipment. When using the forklift, please pay attention to avoid the vulnerable parts of the equipment. Such as sheet metal parts, to avoid the forklift from causing damage to the equipment. For equipment with long overall length, uneven center of gravity. And easy tipping, it is strictly forbidden to use a forklift to carry it.

Handling tools operation

-When conditions are available, the first choice is for forklifts and cranes to unload the truck. And transfer the equipment and its accessories to the designated location.

-If there is no crane in the workshop or the crane tonnage cannot meet the requirements. Please use a crane and forklift to unload the truck. And use appropriate transfer equipment and shipping methods to transport the laser cutting machine. And its accessories to the designated location.

-The factory is small and there is no crane Ⅰ：Use cranes, forklifts or double forklifts to unload the equipment out of the factory and then transfer it. Place a handling tank on the lower part of the front of the equipment bed, and use a forklift to transport it to the designated location on the back.

-If the plant is small and does not have a crane Ⅱ: Use a crane, forklift or double forklift to unload the equipment outside the plant and then transfer it. Place a handling tank on the lower side of the four corners of the machine bed, and use a crowbar to move it to the designated position.