How to choose Fiber Laser Marking Machine–Machine Models
The laser marking is with a laser beam to get permanent marks on a variety of different material surfaces.
The effect of marking is to expose the deep matter by the evaporation of the surface material,
or to “mark” the trace by the chemical and physical reactions of the surface material caused by the laser energy,
or to burn some of the material by laser energy, light to achieve the needed patterns and text.
After introducing the inner main parts of fiber laser marking machine, now we are moving to the outer types. Each type has its own dimension and features. Select the most suitable type is very important. Here we go.
Models of fiber laser marking machine.
This type of machine sales well in the market, it is suitable for clients who want to mark small parts, because the height of lifting pillar is only 47cm. Different scope lens have different focus length, so we need to confirm the focus length of the laser machine. If needed we can also change the height of the lifting pillar. Doing so same machine then can be used to mark big products with high height. If clients wants to use big scope for marking, for example if they need scope lens of 300*300mm, then also clients needs to choose this all-in-one type cabinet, so we can give clients the machine with high lifting pillar 80cm.
Detached machine will mostly be used for marking big products. It can be seen from the picture above that the machine have long lifting pillar, If the clients want the 3D table, we can add the table with this machine. For reference see the picture below.
2. Mini model.
Marking samples of Fiber laser marking machine:
Mobil : 0086 18353156659(Whatsapp)