Fiber laser marking machine parameter introduce
Fiber laser marking machine parameter introduce -marking scope
For the fiber laser marking machine there are some parameters. They have main affect on marking or engraving effect.One of the parameter is marking speed.
for example, Like marking scope. Normally within 100mm, and we can engrave and cut thin metal. Like copper, alunimum and gold within 1mm.
And for larger marking scope over 100mm, we can only mark. But large marking area like 300mm can only mark. and need at least 30w working power.
Fiber laser marking machine parameter introduce-marking speed
For the standare max speed we got from galvo manufacture is 7000mm/s. And some company just say higher speed 10000mm/s , just for attract customer.
When marking the max can only reach 3000mm/s to 4000mm/s. Max marking speed we suggest is 3000mm/s. Because if too high speed, will do damage to the galvo head.
Fiber laser marking machine parameter introduce-frenquency
The frequency affect on marking effect.when higher frequency, the lower the peak power.
High frequency is good for depth engraving , use high frequency for the final sweep. It can clean the marking slug on marking surface.
Fiber laser marking machine parameter introduce-lifetime of laser source
The parameter we got from laser source manufacture is 100000 hours. This is test in standard working condition.
Fiber laser marking machine parameter introduce- beam quality
The optical fiber laser is the medium mixed double-clad fiber. resonant cavity length, so the beam quality is very good.
M2 value is 1.2-1.5, the output flare diameter can achieve 10 microns. Excellent beam quality to ensure a variety of material .
There will be satisfying marking effects as excellent beam quality. Also widely applied in most metal marking industries.