Fiber laser cutting machine fault solution introduction
Fiber laser cutting machines have used for a long time, or because there are some minor faults that may occur during the normal use of the process. For these faults, we may need to constantly understand if there are many problems. If they appear in use. And the fault may affect a lot of work. In order to ensure that the cause can quickly detected, today we have summarized some common faults of the fiber laser cutting machine. And hope to help you master as soon as possible. Then fiber laser cutting machine fault solution inroduction.
As a popular application equipment, fiber laser cutting machine often encounters some small faults during use. In the face of these common faults, what kind of treatment should the operator have? The following is the laser technology of XT laser department will discuss these faults with you.
In the face of the sudden failure of the fiber laser cutting machine equipment, the operator must first keep calm.
And then analyze the fault, is the fiber laser cutting machine equipment stuck, or indirectly stopped working. Or completely stop working. Then first thing to do is to turn off the power. And then to check and watch. There are many kinds of faults common to fiber laser cutting machines. For example, the laser head does not emit light, the size of the fiber laser cutting machine is out of range. And the fiber laser The cutting surface of the cutting machine is not smooth, etc. Then the following is to solve the problem.
The fiber laser cutting machine equipment is working, suddenly there is no laser coming out, the primary reaction is whether the power line is loose, then go to the laser power supply for damage, and finally check the laser tube. When there is a gap in the size of the laser cutting, it is necessary to check whether the setting in the fixed parameters of the laser device is normal, whether the parameters on the computer are correct, whether the number of pulses is normal, etc., and finally the setting of the drawing software in the disaster area.
When the fiber laser cutting machine cuts the surface of the workpiece to be rough, it is necessary to observe whether the material to be cut is within the range of the whole equipment. If it is, then it is necessary to adjust the focusing mirror of the fiber laser cutting machine to focus the light of the laser device. thinner. The effect can be made more obvious.