2D CNC fibre laser cutting system
Fiber laser cutting machine software.
Some customers worry about the machine software operation.
No worries,it is easy,i am a girl,when i came to our company in 2015,i spent 2days to learn the whole machine oepration.
So you know,even for a girl,it only need 2days.
Firstly,for metal plate cutting,the software support format is DXF file,its same as CO2 machine and other CNC software.
Tube cutting need IGS or ZZX format,i think most customers use some CAD software to make designs,it also can export the IGS format.
Below is the demo software link ,you can try it by yourself.
Many customers said the function is similar like CAD,easy to operate.
Plate cutting software: https://drive.google.com/open?id=0B7E8qO-ESpghcVRHRFktZnBlUFU
Tube cutting software: https://drive.google.com/open?id=110GXJ1Y0727Vl3KXMhwlPERMmByAmA5T
Secondly,there are many basic functions,like nesting,array,drawings,scale,Micro Joint,Auto sort,etc.
Except these parts,then it is the cutting parameters settings.We should set the gas pressure,focus,cutting height,pierce,frequency,cutting speed for different materials and thickness.
Before shipping,engineers will test the machine and save parameters on your machine.And usually for fiber laser cutting machine,customers need engineers installation and training.So do not worry about it.
Thirdly,the software with the control handle,including the signal receiving device,you can leave the machine 5 meters away to operate the machine,no need worry about the safety.
On control handle,there are the functions to adjust the laser head ,the cutting position.
Like Zero,make the laser head back to Zero point.
Frame is to make sure the cutting position.
And control the laser head move back and forward.Blow the gas.
Start cutting,stop cutting,pause cutting.
Dry cut,no real cutting,to check Mechanical running,etc.
So no need to worry about the operation.Do not image a big problem for yoursel